Nvidia Jetson TK1 Development Kit

Features ($192 ):

  • Tegra K1 SOC
    • Kepler GPU with 192 CUDA cores
    • 4-Plus-1 quad-core ARM Cortex A15 CPU
  • 2 GB x16 memory with 64 bit width
  • 16 GB 4.51 eMMC memory
  • 1 Half mini-PCIE slot
  • 1 Full size SD/MMC connector
  • 1 Full-size HDMI port
  • 1 USB 2.0 port, micro AB
  • 1 USB 3.0 port, A
  • 1 RS232 serial port
  • 1 ALC5639 Realtek Audio codec with Mic in and Line out
  • 1 RTL8111GS Realtek GigE LAN
  • 1 SATA data port
  • SPI 4MByte boot flash

Dr. Dobbs has an in depth look here.

Comments (0)

This post does not have any comments. Be the first to leave a comment below.


Post A Comment

You must be logged in before you can post a comment. Login now.

Featured Product

ST Robotics Develops the Workspace Sentry for Collaborative Robotics

ST Robotics Develops the Workspace Sentry for Collaborative Robotics

The ST Robotics Workspace Sentry robot and area safety system are based on a small module that sends an infrared beam across the workspace. If the user puts his hand (or any other object) in the workspace, the robot stops using programmable emergency deceleration. Each module has three beams at different angles and the distance a beam reaches is adjustable. Two or more modules can be daisy chained to watch a wider area. "A robot that is tuned to stop on impact may not be safe. Robots where the trip torque can be set at low thresholds are too slow for any practical industrial application. The best system is where the work area has proximity detectors so the robot stops before impact and that is the approach ST Robotics has taken," states President and CEO of ST Robotics David Sands.