Drone Light Painting - The Christmas Edit
From Ascending Technologies' blog:
The moves of the LED drone were shot while taking a long exposure photograph of every scene. Up to 10 minutes exposure time were needed. Additionally the flights have been filmed with an A7S Mark ii. In post processing the stills from the original drone flights were visualized via VFX and combined with further video footage.
The Drone Light Painting flights have been performed at airspeeds of 2 m/s with the patented V-Form Octocopter AscTec Falcon 8. Santa Claus throwing the presents into the chimneys and the snowflakes in the starting sequence of course are animated GIFs, yet based on flown paintings. Probably it was possible to do any drone light painting you like... (more)
RoboUniverse San Diego 2015
If you really want to see what imagination and a bit of opportunity can do for an industry I urge you to attend one of these Expos. You won't regret it and you might even come away with a new and unique solution to something you need.
HRI Case Study of Wireless Control: 5D Robotics
When youre building something for the military to use, you have to be sure it can survive the toughest working conditions.
'Darwin' the thinking robot teaches itself how to walk, just like a child
Andre Mitchell for ChristianToday: Just like a real human toddler, a robot is learning how to take baby steps inside a laboratory at the University of California Berkeley.
The state-of-the-art robot mimics the behaviour of a child so realistically that it also falls as it attempts to take its first steps.
What is even more impressive is that the robot, nicknamed "Darwin," is actually teaching itself how to walk, much like a little child.
The robot's developers, Pieter Abbeel and his team at UC Berkeley's Robot Learning Lab, explained that Darwin is not like other robots that are programmed to do only a set of things.
This robot has a neural network designed to mimic the human brain, through which it undergoes the process called "reinforcement learning."
"Imagine learning a new skill, like how to ride a bike. You're going to fall a lot, but then, after some practice, you figure it out," one of Darwin's developers, computer scientist John Schulman, explained in an article on NBC News. Cont'd...
Low-cost, LiDAR-based Navigation for Mobile Robotics
Using the ROS Navigation suite from the Open Source Robotics Foundation (OSRF), we highlight a solution employing the Rhoeby Dynamics R2D LiDAR, a low-cost LiDAR device
3D Printing of Motors and Electronics
My research involves developing techniques to 3D print electric motors and electronics. This goes beyond the usual 3D printed structures - structures dont do anything. To do things, we need motors and electronics to control those motors.
There's a five-story vending machine dispensing used cars in Nashville
From Mashable:
That's right; online used car retailer Carvana has officially unveiled its first vending machine completely stocked with cars. Standing at five stories tall, the coin-operated (yes, really) glass tower vending machine can house as many as 20 used cars at a time. The facility also includes a welcome center and three customer delivery bays to which the cars are dispensed... (full story)
3 Micro Drones & Robot Swarms Initiatives Backed by the US Military
DARPAs FLA program aims to create unmanned nano robot like insects & birds that can go into buildings & perform key activities that will not be possible by Humans.
Solar for UAV Index
The new metric (PUAV) is a way to compare solar technologies specifically for UAV applications.
FUTURE ROBOTIC CARS Unvieled at Tokyo Motor show 2015
Driverless and Zero Emsision are REALITY by 2020.
Toyota Invests $1 Billion in AI and Robots, Will Open R&D Lab in Silicon Valley
By Erico Guizzo and Evan Ackerman for IEEE Spectrum: Today in Tokyo, Toyota announced that it is investing US $1 billion over the next five years to establish a new R&D arm headquartered in Silicon Valley and focused on artificial intelligence and robotics. The Toyota Research Institute (TRI) plans to hire hundreds of engineers to staff a main facility in Palo Alto, Calif., near Stanford University, and a second facility located near MIT in Cambridge, Mass.
Former DARPA program manager Dr. Gill Pratt, an executive technical advisor at Toyota, was named CEO of TRI, which will begin operations in January. Toyota president Akio Toyoda said in a press conference that the company pursues innovation and new technologies “to make life better for our customers and society as a whole,” adding that he wanted to “work with Gill not just because he’s an amazing researcher and engineer, but because I believe his goals and motivations are the same as ours.” Cont'd...
SkyTech 2016 - UAV Conference & Exhibition
SkyTech 2016 is a two-day B2B tradeshow for the commercial UAV industry. In 2016 SkyTech will incorporate an exhibition, three conferences, workshops, product launches, live demonstrations and marketing opportunities for the commercial UAV community.
Skype founders invent self-driving robot that can deliver groceries for £1
By Sophie Curtis, video by Robert Midgley: You've heard of Amazon's plan to deliver packages using drones; now a new company called Starship is promising to disrupt local delivery with the launch of a self-driving robot that can deliver groceries to customers' doors in under 30 minutes for less than £1.
The Starship robot has been developed by Skype co-founders Ahti Heinla and Janus Friis. It drives on pavements at an average speed of 4mph, and uses proprietary mapping and navigation technology to avoid crashing into obstacles, (check out the video we made). Cont'd...
3D Printing and Acoustics: Rapid Prototyping of Sound Diffusers
By being able to design diffusers in 3D and print them, we streamline the prototyping process tremendously. We can do virtual simulations with the 3D models to get a sense of the effectiveness, and we can make aesthetic or functional changes before its printed.
Spreading like Wildfire
The Yosemite incident, and others in America and Australia, are representative of wider discussions that need to be brought to the publics doorstep if respect for when and where to use drone technology can be instilled as an agreed-upon standard of general practice.
Records 1081 to 1095 of 1262
First | Previous | Next | Last
Featured Product
Model TR1 Tru-Trac
The Model TR1 Tru-Trac® linear measurement solution is a versatile option for tracking velocity, position, or distance over a wide variety of surfaces. An integrated encoder, measuring wheel, and spring-loaded torsion arm in one, compact unit, the Model TR1 is easy to install. The spring-loaded torsion arm offers adjustable torsion load, allowing the Model TR1 to be mounted in almost any orientation - even upside-down. The threaded shaft on the pivot axis is field reversible, providing mounting access from either side. With operating speeds up to 3000 feet per minute, a wide variety of configuration options - including multiple wheel material options - and a housing made from a durable, conductive composite material that minimizes static buildup, the Model TR1 Tru-Trac® is the ideal solution for countless applications.
Robotics and Automation - Featured Company
ResinDek / Cornerstone Specialty Wood Products
As the manufacturer of ResinDek® panels, we have been at the forefront of testing and innovating flooring panels for the Material Handling Industry since 1994. In 2007, we began providing ResinDek panels for automated warehouse distribution robots. Much of our initial research and development occurred with Automated Guided Vehicles. In the last decade, we have provided a variety of ResinDek engineered flooring products to numerous Automated Guided Vehicles (AGV) and Autonomous Mobile Robot (AMR) manufacturers for their testing labs. As a result, millions of square feet of ResinDek panels are in service worldwide with robotic traffic in distribution centers, warehouses, microfulfillment centers, and retail environments.
