MDP Series Axial Fans Now Updated With IP68 Degree of Protection

Oriental Motor is pleased to announce the reclassification of the MDP Series axial fans from IP55 to IP68 degree of protection.

Torrance, CA - ORIENTAL MOTOR USA CORP


MDP Series Axial Fans Now Conforms to IP68 Rating Under the IEC Standards

Oriental Motor is pleased to announce the reclassification of the MDP Series axial fans from IP55 to IP68 degree of protection. The MDP Series axial fans can now be used in locations that are prone to water splashing under IP68 classification. The MDP Series also includes a stop sensor that outputs a signal when the fan stops.

IP68 degree of protection prevents ingress of jet water from all directions. More specifically, 3.3 gal/min (12.5 L/min), 120 inH2O (30 kPa) jet water from all directions from a distance of 9.8 ft. (3 m) for 3 minutes.

The MDP Series is available with 24 VDC input and frame sizes from 3.15 in. (80 mm) up to 4.69 in. (119 mm). Fan kits are available and includes axial fan, finger guard and mounting screws. Thermostats are also available for temperature controlled environment.

Visit our web site to learn more about the MDP Series IP68 splash proof DC input axial fans:
http://www.orientalmotor.com/cooling-fans/dc-axial-fans-ip68-mdp-series.html

ABOUT ORIENTAL MOTOR
Since its founding in Japan in 1885, Oriental Motor has been a world leader in motion systems. For over a century we have concentrated on technological advancement and product design improvement—an emphasis evident in the sophisticated devices we market today. Oriental Motors sales and service network is international, with offices throughout North America, Europe and Asia. Domestically, ORIENTAL MOTOR U.S.A. CORP. was established in 1978.

Featured Product

The ERT150 - Dorner’s Next Evolution of Edge Roller Technology Conveyors

The ERT150 - Dorner's Next Evolution of Edge Roller Technology Conveyors

The next evolution in Dorner's Edge Roller Technology conveyor platform, the ERT®150, is ideal for small and light-load assembly automation, as well as medical and medical-device assembly application. The ERT platform is the only pallet conveyor of its kind available with an ISO Standard Class 4 rating for cleanroom applications. Earning the ISO Standard 14644-1 Class 4 rating means Dorner's ERT150 will conform and not contribute to the contamination of cleanrooms to those standards. As implied by its name, the ERT150 (Edge Roller Technology) uses rollers to move pallets through the conveyor smoothly with no friction (a byproduct often seen in belt-driven platforms). The conveyor's open design eliminates concerns of small parts or screws dropping into rollers and causing conveyor damage or jamming. The ERT150 is suited to operate in cleanroom environments requiring a pallet handling conveyor. It is capable of zoning for no or low-back pressure accumulation and is ideal for automation assembly applications within industries including medical devices, electronics, consumer goods among others.