Renice X10 Series PCIe U.2 NVMe Industrial SSD is a high-performance, high reliability solid state drive (SSD) solution, built with NAND Flash memory, DRAM memory, and the advanced PCIe NVMe controller in a standard 2.5-inch form factor housing. Using a 1-bit-per-cell (SLC) NAND configuration, U 2 NVMe SSD is well-suited for write-intensive applications used in wide industrial SSD temperatures (-40°C ~+85°C) and high stress environments, such as aviation, rail transportation, marine equipment, seismic instrumentation, big data center, base stations, industrial control, and factory automation.

Renice X10 Series PCIe U.2 NVMe Industrial SSD is a high-performance, high reliability solid state drive (SSD) solution, built with NAND Flash memory, DRAM memory, and the advanced PCIe NVMe controller in a standard 2.5-inch form factor housing. Using a 1-bit-per-cell (SLC) NAND configuration, U 2 NVMe SSD is well-suited for write-intensive applications used in wide industrial SSD temperatures (-40°C ~+85°C) and high stress environments, such as aviation, rail transportation, marine equipment, seismic instrumentation, big data center, base stations, industrial control, and factory automation.

Basic Information
Standard Serial ATA: PCIe 3.0x4 (Compatible with NVMe Express 1.2)
Form Factor: 2.5-inch (100.0mm x 70.0mm x 9.5mm) L×W×H
Capacities: 1TB~2TB (r-SLC SSD)
Input Voltage: 12V (±10%)
Type: Industrial SSD

Performance
Max Sequential Data Read/Write: 2600/1900MB/s
4Kb Random Read/Write IOPS: 600,000 / 160,000
MTBF: >2,000,000 hours @25C

Flash Memory Management
Flash management algorithm: Static and dynamic wear-leveling, bad block management algorithm
SMART (Self-Monitoring, Analysis and Reporting Technology): √
NAND Configuration: 1 bit per cell (R-SLC)

Other Functions
Support Power Failure Protection: √
Support Secure Erase (optional): √
AES 256-bit Encryption: √
Thermal Adaptive Function: √
Support TRIM: √

Temperature Ranges
Operation: -40°C to +85°C
Storage: -50°C to +95°C
Humidity: 5-95%
Vibration: 10Hz-2000Hz, 20 G (X, Y, Z axis, 1 hour /axis)
Shock: Peak Acceleration: 1,500 G, 0.5ms(Half-sine wave, ±X,±Y,±Z axis, 1 time/axis); Peak Acceleration: 50 G, 11ms(Half-sine wave, ±X,±Y,±Z axis, 3 times/axis)