What is Redwood Robotics?
Travis Deyle at Hizook has some interesting info about Redwood Robotics, a Silicon Valley startup with backing from Willow Garage, Meka Robotics and SRI. The company has been in stealth mode for the past year but yesterday at an event in Menlo Park they announced the first real statement about their plans for the company. At the event Aaron Edsinger, who is CEO of Meka Robotics, said the goal of the new company would be: "To enable the personal and service robot markets through a new generation of robot arms that are simple to program, inexpensive, and safe to operate alongside people."
Sounds like a smart plan. Be sure to read Deyle's full post over at Hizook.
Stompy: A Giant Two Seat Spider Robot
The Artisans Asylum in Boston Massachusetts s a non-profit community craft studio. In their next robotics class their goals are fairly simple: build a car-sized two-person hexapod robot and ride it. What makes their plans different from the scribbling of every 12 year old who just found Japanese animation is that the guys teaching the class have worked on projects real projects like Boston Dynamics PETMAN, AlphaDog and BigDog.
Hizook does a good job of summarizing what Artisans Asylum is and Stompy.
The project is still in the conceptual stages but the team has a blog with some of the tests and presentations they've done so far.
Festo ExoHand
The ExoHand from Festo is an exoskeleton that can be worn like a glove. The fingers can be actively moved and their strength amplified; the operator's hand movements are registered and transmitted to the robotic hand in real time. The fingers can be actively moved and their strength amplified; the operator’s hand movements are registered and transmitted to the robotic hand in real time. The objectives are to enhance the strength and endurance of the human hand, to extend humans’ scope of action and to secure them an independent lifestyle even at an advanced age.
.
RoboGames 2012: Mech Warfare
Last weekend was RoboGames 2012. IEEE Spectrum has posted a few videos from the Mech Warfare competition where robots battle inside a miniature model city. The videos contain several Each robot is controlled remotely, and the human pilot sees only a first-person view from the perspective of a wireless camera mounted on the front of the robot. Each robot is equipped with pressure sensitive plates that register hits from airsoft pellets.
New Release Of ROS Officially Available
ROS Fuerte Turtle the fifth ROS ROS distribution release is now officially available. ROS Fuerte has major improvements that make it easier to integrate with other software frameworks and tools. This includes a rewrite of the build system, migration to the Qt framework, and continued transition to standalone libraries. A detailed change log as well as installation instructions are available here.
Piccolo: Arduino Based Drawing Bot
Diatom design studio are developing an open source drawing robot kit that they hope to sell for just $70 dollars. The kit: "Piccolo", will be powered by an Arduino board, and supports movement along X, Y or Z axes. You can attach a pen, pencil, brush or possibly even an X-Acto knife and it will draw out any sketch you upload to it. They plan on including Arduino and Processing libraries that will allow you to develop dynamic drawings using sensor data. In the video below the prototype draws procedural tree sketches that vary according to the bots proximity to a light source. The kit isn't available yet but on Diatom's website you can sign up now to their mailing list.
DARPA Robotics Contest Update
Just days after announcing the DARPA Robotics Contest the DARPA website is reporting that Boston Dynamics has been selected as a "sole source" to develop and build the humanoid robots for the contest. Boston Dynamics will build 8 identical humanoids, which will be based on PETMAN. IEEE Spectrum has the full story here.
DARPA Robotics Contest Announced
The Pentagon’s research and development agency has announced a contest to develop ground robotic capabilities to execute complex tasks in dangerous, degraded, human-engineered environments. The program will focus on robots that can utilize available human tools, ranging from hand tools to vehicles.The DARPA Robotics Challenge will consist of three key events – a Virtual Disaster Challenge, and two (2) Disaster Response Challenges. Participation in the Virtual Disaster Challenge is required only for teams working exclusively on control software development. The agency has not yet announced how much it intends to spend on the program or the size of the prize but previous contest awarded two million dollars for the top prize with one million dollars for the runner up. The full contest details and registration can be found here.
Printable Robots From MIT
The Massachusetts Institute of Technology (MIT) is leading an ambitious new project to reinvent how robots are designed and produced. Funded by a $10 million grant from the National Science Foundation (NSF), the project will aim to develop a desktop technology that would make it possible for the average person to design, customize and print a specialized robot in a matter of hours.
The project envisions a future desktop technology that prints actual programmable hybrid electro-mechanical devices from simple descriptions on-demand, anywhere, and with performance one would expect from a team of professional engineers, using advanced materials. The project aims to transform manufacturing as dramatically as the personal computer democratized information technology and transformed how we communicate.
Boston Dynamics Sand Flea Jumping Robot
Sand Flea is an 11 pound robot that drives like an RC car on flat terrain, but can jump 30 ft into the air to overcome obstacles. That is high enough to jump over a compound wall, onto the roof of a house, up a set of stairs or into a second story window. The robot uses gyro stabilization to stay level during flight, to provide a clear view from the onboard camera, and to ensure a smooth landing. Sand Flea can jump about 25 times on one charge.
Robotic Industries Association Launches New Certified Robot Integrator Program
Robotic Industries Association (RIA), the industry’s largest trade group representing over 265 companies, has announced the launch of their Certified Robot Integrator Program.
“The new RIA Certified Robot Integrator program began from a simple question: What can the RIA do to help the industry develop more successful robot applications?” said RIA President, Jeff Burnstein. Focus groups were held with leading system integrators and collaborative end users. Users told the RIA that a robot certification program would be useful as a way to help them develop a baseline for the evaluation of robot integrators. System integrators told the RIA this would be a great way for them to benchmark themselves against best industry practices. After more than two years of touring the country to get input from integrators, users, robot suppliers and other interested parties, the program was officially launched in January 2012. “I think there is great excitement about it throughout the industry,” Burnstein explained.
EXAM CRITERIA:
There are three basic parts to the on-site exam and audit:
Hands-On section
Expert Response Section: (Participant industry tenure & biography)
On-site audit of business infrastructure per completed “Self Score Card”. Supporting evidence will be gathered before any certification date is scheduled.
RIA's full press release can be read here. They have also set up a landing page for the Certified Robot Integrator program here.
Amazon.com Inc. To Buy Kiva Systems Inc. for $775 million.
The all-cash deal for closely held Kiva will close in the second quarter, Seattle-based Amazon said today in a statement. Kiva’s orange robots, which can slide under shelves and bins of products, are used by Quidsi Inc. -- the company behind Soap.com and Diapers.com that Amazon acquired for about $545 million last year.
Kiva, whose headquarters will remain in North Reading, Massachusetts, will help Amazon make shipping more efficient, the company said.
“Amazon has long used automation in its fulfillment centers, and Kiva’s technology is another way to improve productivity by bringing the products directly to employees to pick, pack and stow,” Dave Clark, vice president of global customer fulfillment at Amazon, said in the statement.
Bloomberg has the entire financial details here.
'Making Things See' Kinect Book by Greg Borenstein
'Making Things See' from O'Reilly Media / Make shows you how to build Kinect projects with inexpensive off-the-shelf components, including the open source Processing programming language and the Arduino microcontroller. Things covered in the book include:
Create Kinect applications on Mac OS X, Windows, or Linux
Track people with pose detection and skeletonization, and use blob tracking to detect objects
Analyze and manipulate point clouds
Make models for design and fabrication, using 3D scanning technology
Use MakerBot, RepRap, or Shapeways to print 3D objects
Delve into motion tracking for animation and games
Build a simple robot arm that can imitate your arm movements
Discover how skilled artists have used Kinect to build fascinating projects
The book is available now on Amazon.
Robotic Glove For Auto Workers And Astronauts
General Motors and NASA are jointly developing a robotic glove that auto workers and astronauts can wear to help do their respective jobs better while potentially reducing the risk of repetitive stress injuries.
The Human Grasp Assist device, known internally in both organizations as the K-glove or Robo-Glove, resulted from NASA and GM's Robonaut 2 – or R2 – project, which launched the first humanoid robot into space in 2011. R2 is a permanent resident of the International Space Station.
When engineers, researchers and scientists from GM and NASA began collaborating on R2 in 2007, one of the design requirements was for the robot to operate tools designed for humans, alongside astronauts in outer space and factory workers on Earth. The team achieved an unprecedented level of hand dexterity on R2 by using leading-edge sensors, actuators and tendons comparable to the nerves, muscles and tendons in a human hand.
Research shows that continuously gripping a tool can cause fatigue in hand muscles within a few minutes, but initial testing of the Robo-Glove indicates the wearer can hold a grip longer and more comfortably.
For example, an astronaut working in a pressurized suit outside the space station or an assembly operator in a factory might need to use 15 to 20 pounds of force to hold a tool during an operation but with the robotic glove they might need to apply only five to 10 pounds of force.
Inspired by the finger actuation system of R2, actuators are embedded into the upper portion of the glove to provide grasping support to human fingers. The pressure sensors, similar to the sensors that give R2 its sense of touch, are incorporated into the fingertips of the glove to detect when the user is grasping a tool. When the user grasps the tool, the synthetic tendons automatically retract, pulling the fingers into a gripping position and holding them there until the sensor is released.
Instructions For Developing Your Own 3D Camera
The Hackengineer web site has complete plans for building a portable 3d camera. The system uses a Texas Instruments DLP pico projector, Leopard Imaging’s Leopardboard 365 VGA camera board, a small 2x telephoto lens, and a BeagleBoard. The system uses the concept know as Structured-light. Structured light uses a set of temporally encoded patterns that are sequentially projected onto the scene. When the pattern is seen from different viewpoints, the pattern appears geometrically distorted due to the surface shape of the object. This information is used to construct the depth data.
Records 841 to 855 of 942
First | Previous | Next | Last
Industrial Robotics - Featured Product
Precision Drive Systems - Trust PDS for 3-5 Day Robotic Spindle Repair
Precision components machined by CNC robot machining systems require compact, lightweight, and high-speed motorized spindles capable of delivering higher efficiency, performance, and reliability than those used in many other industries. That's why manufacturers of milling, cutting, trimming, grinding, polishing, and deburring trust Precision Drive Systems (PDS) to provide accurate and dependable spindle repair to perform to the most exacting standards.
Robotics and Automation - Featured Company
Basler
Basler AG is an international leader and experienced expert in computer vision. The company offers a broad coordinated portfolio of vision hardware and software. In addition, it enables customers to solve their vision application issues by developing customer-specific products or solutions. Founded in 1988, the Basler Group employs around 850 people at its headquarters in Ahrensburg, Germany, as well as other sales and development locations throughout Europe, Asia, and North America.
