Novotechnik - Auto Racing Angle Sensors

Novotechnik U.S. announces the SP2800 Auto-Sport Series of rotary sensors for angle measurement. These sensors were developed for auto racing and other demanding applications.

Southborough, MA — Novotechnik U.S. announces the SP2800 Auto-Sport Series of rotary sensors for angle measurement. These sensors were developed for auto racing and other demanding applications.


Key specifications for SP2800 Auto Sport include 20 models covering measurement ranges of 0 to 100°, 130°, 308°, 345° or 350°. There is also a redundant version with a 100° range. These ranges were specifically selected for sequential gearbox, steering angle, throttle and suspension measurement applications. Repeatability is 0.01%. Linearity is to 0.3 % depending on model.

The SP2800 Auto-Sport Series is hermetically sealed, without any moving seals, to IP67 and provides long life of ≥ 50 million cycles even in water, dust and oil environments. They can be ordered with plastic or aluminum housings. Temperature drift is 5 ppm/K. Vibration the parts will operate under is up to 20 g.

Operating temperature range of the SP2800 Auto Sport is -40 to +150 °C that converts to -40 to +302 °F. They have compact designs of 1.1 inch diameter. Mechanical coupling is with either push-on or 6 mm shaft. Viton boot or aluminum connectors can be ordered and are sold separately.
For more information on the SP2800 Auto-Sport Series contact Novotechnik U.S, Inc, Phone: 508-485-2244 · E-mail: info@novotechnik.com · Web: www.novotechnik.com/sp28

Featured Product

Real Time Systems - ALL APPLICATIONS ON ONE HARDWARE PLATFORM

Real Time Systems - ALL APPLICATIONS ON ONE HARDWARE PLATFORM

The RTS Hypervisor enables work-load consolidation of both real-time and non-real-time operating systems on a single x86 based platform. Unlike traditional virtualization, we partition and allocate the hardware for each work-load and provide a "privileged" mode for real-time operating systems that guarantee zero impact to determinism while adding zero jitter. This is instrumental for work-loads such as robotic controllers managing motion control where minimum jitter is required. And, our hypervisor is designed for easy setup and configuration for any work-load consolidation scenario. This equates to deterministic real-time applications taking advantage of all the benefits of virtualization immediately, without costly implementation projects.