Need help coupling two parallel shafts? We offer a full family of Power-On Clutches
Power-on Clutches are used to couple two parallel shafts. The armature hub assembly is mounted to the same shaft as the rotor assembly. The armature hub accommodates a pulley, gear, sprocket, etc., to transmit torque to the second shaft. The field assembly is mounted on the shaft and retained by a loose-fitting pin or bracket through the anti-rotation tab.
New Shaft Couplings for Stepper Motors
Shaft couplings are actually the mechanical device that connects or couples the two drive element or shaft together for transmitting the power from one end to another. Couplings do not allow any shaft interruption during operation. Anyway, with the torque limiting couplings can disconnect when the limit of the torque is exceeded.
New Motion Control Products from STEPPERONLINE
Stepper motor driver is an actuator which can transform pulse signal into angular displacement signal, it drives stepper motor to rotate at an angle called step angle in the set direction when receiving a pulse signal. The motor speed is up to the pulse frequency given from the controller, and the displacement is decided on the pulse quantity given from the controller.
SMAC Meets OEM Form, Fit and Function Requirements for Existing Solutions
MCA inside allows users to more easily implement programmable velocity, position, and force with real time feedback.
SPRINT Robotics World Conference for Inspection and Maintenance Robotics 2019: Rapid developments, long-term industry priorities, market trends
- World Conference for Inspection and Maintenance Robotics 2019 & Exhibition to cover a broad scope of asset and industry sectors
- Keynote speakers announced
- Launch of industry guidelines for in-service robotic inspections for storage tanks
Arsenal launches 3 new robotic dispensing systems on the Universal Robot Platform
New cartridge based robotic dispensing systems for low and medium volume manufacturing processes
Vision in Challenging Lighting Environments
Digital image sensors work based on the Photoelectric effect. When the image sensor is exposed to light (photons), an equivalent charge is produced by the image sensor. It is then converted to image data.
RightHand Robotics Establishes Japan Entity
Country's first multi-robot RightPick™ installation to be unveiled at PALTAC CORPORATION warehouse
Omron Automation Americas Announces FY18 Distributor of the Year Award Winners
Automation solutions provider Omron Automation Americas honors its top channel partners in the U.S., Canada and Mexico with an award recognizing excellence in revenue growth, local engagement, expertise and solution selling.
Novotechnik - Compact Hydraulic/Pneumatic Position Sensors
TM1 Series stroke lengths are from 50 to 2,000 mm in 25 mm steps. Operating pressure is up to 5,076 psi (350 bar) with peaks to 6,526 psi (450 bar). Both plug-in and screw type flange models are available.
Smart Gripper for Small Collaborative Robots
With the growth and proliferation of collaborative robots, there has become an increased need for a wide variety of grippers and end effectors in general. One of the more challenging applications is for automated gauging and measurement of small parts.
Robofill 4.0 - Robot and Gripper-assisted Filling Concept for Customized Bottle Supply
The Zimmer Group development team also faced a tremendous challenge in developing special gripper fingers, which were intended to handle any potential type of bottle from 0.33 l up to 0.75 l by gripping the neck and body of the bottle.
Who said that women don't build robots?
Here's 30 good reasons to stop the sexism in STEM.
Stäubli Robotics joins with Lanco Integrated to illustrate Turnkey Automated Systems
Staubli with Lanco Integrated will present innovations for assembly applications
Mencom Offers NEW Easy Access, 5 port Ethernet Switch / Panel Interface Connector Solution
Mencom's NEW LP1-E45UM-5 Low profile Panel interface connector has combined two of the most common and versatile components utilized by today's integrators, machine builders, and panel shops.
Records 3361 to 3375 of 11747
First | Previous | Next | Last
Industrial Robotics - Featured Product
Schmalz Technology Development - The Right Gripper for Every Task
In order to interact with their environment and perform the tasks, lightweight robots, like all industrial robots, depend on tools - and in many cases these are vacuum grippers. These form the interface to the workpiece and are therefore a decisive part of the overall system. With their help, the robots can pick up, move, position, process, sort, stack and deposit a wide variety of goods and components. Vacuum gripping systems allow particularly gentle handling of workpieces, a compact and space-saving system design and gripping from above. Precisely because the object does not have to be gripped, the vacuum suction cupenables gapless positioning next to each other.
