The 3D Printshow - Learn About 3D Printing
The 3D Printshow is the first dedicated 3D printing event anywhere in the world.
Advanced Manufacturing Event Returns to Houston
UBM Canon brings PBS Texas, TexasPack, and other trade shows to NRG Center, October 13-14
Boston Engineering Receives $500,000 MassVentures Grant to Commercialize its Biologically Inspired Unmanned Underwater Vehicles (UUVs)
"Our vehicle solutions are addressing the need to keep people working in maritime environments out of harm's way and to enhance underwater security, research, maintenance, and other applications"
Sciaky, Inc. to Highlight its New Metal Additive Manufacturing Capabilities at EuroMold
EuroMold takes place September 22-25, 2015 in Dusseldorf, Germany.
Great Rock Development Signs LOI to Acquire Pioneering Autonomous Robotics Company
The target company brings a wealth of experience and knowledge to Great Rock as it is an established leader in the Automation Industry and has the technological reach to target several vertical markets.
F3Expo for Drone Hobbyists Descends on Atlanta's Georgia Dome November 12-15
Drones are making headlines and they're coming to Atlanta! F3Expo is the FPV, Flight, Festival & Expo, a public, all-ages event for drone hobbyists: novices, expert pilots, photographers, tech enthusiasts, racers, retailers and manufacturers.
Fisher Unitech to Host Solidworks Design Excellence Forum
Fisher Unitech will be showcasing new Solidworks 2016 updates along with other technologies that help the design and manufacturing industry maintain a high level of production at their Design Excellence Forum series.
Volvo: Refuse Truck Driver is Supported by Robot
The purpose of ROAR is to demonstrate how we, in the very near future, will use smart machines to assist with a broad range of activities in society.
More than 50,000 Students Worldwide Use "Game-Changing" Technology to Tackle New FIRST Tech Challenge Game, FIRST RES-Q
5,000+ Teams of Students to Use New Java-Based Android Platform Powered by Qualcomm Snapdragon 410 Processor During 2015/16 Season
Reducing Complexity: DARPA Seeks New Composite Material and Process for Manufacturing Small Parts
New composite feedstocks could reduce the cost and production time of small, lightweight composite parts-increasing military system performance and compressing tool development and fabrication cycles
WowWee brings expensive university bots to store shelves
By Corinne Iozzio for Scientific American: Hong Kong–based WowWee's success stems from bringing university research projects to life that might otherwise languish in the prototype stage. A licensing agreement with the Flow Control and Coordinated Robotics Labs at the University of California, San Diego, for example, provides WowWee with access to patents and the labs with a healthy cash infusion. The collaboration has already netted a series of toy robots that balance like Segways. More recently, the avionics lab at Concordia University in Montreal began working with the company to perfect flight algorithms for a four-rotor drone. Next, chief technology officer Davin Sufer says he has his eye on the Georgia Institute of Technology and its work with swarming behaviors, which would allow a group of robots to function in tandem.
In the case of Switchbot, WowWee adapted a locomotion system developed in part by former U.C. San Diego student Nick Morozovsky. The robot moves on tank-tread legs either horizontally to navigate uneven terrain or on end to stand and scoot fully upright. Morozovsky built his prototype with off-the-shelf parts, including a set of $50 motors. The motors were a compromise; each one had the size and torque he wanted but not the speed. Over the past few years he has worked with WowWee to customize a motor with the exact parameters needed and to cut the final cost of the part down to single digits.
That back and forth yields low-cost, mass-producible parts, which means university-level robotics could become available to everyday people. “One of the reasons I went into mechanical engineering was so I could create real things that have a direct impact,” Morozovsky says. “I didn't expect that to necessarily happen in the process of grad school.” Cont'd...
IEF-Werner reduces product development process
Online availability of important data
IEF-Werner provides provides numerous drawings and documents free of charge via CAD online portal TraceParts. This saves time during the product development process and simplifies it considerably.
Mersen will demonstrate R-Tools GEN II
The 2015 IEEE ECCE conference and exposition, September 21st and 22nd in Montral, Canada
Festo and Graybar Ink National Distribution Agreement
Festo, one of the world's premier automation companies, and Graybar, a leading distributor of electrical, communications, and data networking products and provider of related supply chain management and logistics services, recently signed a national distribution agreement.
Robot Taxis Are to Be Main Drive Around for 2020 Tokyo Olympics
With an еуе оn 2020, thе gоvеrnmеntѕ revised economic strategy adopted in Junе саllѕ fоr the аррliсаtiоn оf rоbоt tесhnоlоgiеѕ аѕ travel guides аt Narita International Airроrt in Chibа Prеfесturе, аnd Tоkуоѕ Hаnеdа airport.
Records 5356 to 5370 of 6999
First | Previous | Next | Last
Featured Product
The piCOBOT Electric vacuum generator
Fully electric, slim design and absence of air-tubing and cabling. The new piCOBOT® Electric heads towards another success for Piab's piCOBOT® program. A secondary effect of these achievements is the absence of entangling air tubing and cabling. It simplifies the installation, and as the new piCOBOT® Electric only needs a single connection on the cobot arm, the clean set-up allows a completely unrestricted movement. The new piCOBOT® Electric package will contain plug & play software to fit UR e-series cobots, but many other useful adaptations will be introduced in the coming year
