The Firebird is equipped with a tailored version of Garmin's latest touchscreen-controlled integrated flight deck system
Created to address an unmanned vehicle need, innovative filter design maintains clear camera view while ground vehicle or surface vessel is in operation
World-renowned robot expands international presence into Central Europe
Lehmann Aviation's LA100 is a fully autonomous UAV designed to capture 5 minutes of flight at the height of 80m-100m using a mounted GoPro camera. Camera can be mounted on the top of the wing for Oblique images (Hero, Hero2 or Hero3) or at the bottom of the wing for Vertical images (Hero3). You can also choose to fly with 2 cameras at the same time.
In-booth demonstration features robotic case packing, unpacking and palletizing capabilities
November 21, 2012, Beijing - along with the development of mobile device hardware, there were as lots of mobile CAD software on the market today. With the release of GstarCAD MC PRO for iOS and for Android last month, this Mobile CAD Client has attracted users all over the world with its features.
Beijing, China: November 21, 2012-Recently, CHIAC Mexico 2012 was held in Banamex exhibition center. As an international leading CAD products and solution provider, Gstarsoft attended this exhibition with the products of GstarCAD MC PRO, GstarCAD 2012, and GstarCAD Architecture 2012 and so on.
Rio de Janeiro, Brazil, Nov 7th - 10th, 2012 - Gstarsoft, one of the world leading providers of 2D/3D design software and its authorized distributor - Arkisoft successfully showed GstarCAD in the CONSTRUIR RIO held in Riocentro Convention Center.
Lengthy Atlantic interview with linguist Noam Chomsky on the state of AI and the use of statistical models. The interview can be read here and a detailed overview and reply by Director of Research at Google, Peter Norvig is here .
ST Robotics announced today the latest addition to their R12 robot product line, the Tandem R125, a low cost two-armed robot system. Including the programmable carousel, ST Robotics' Tandem R125 robot has a total of 11 axes. The entire system is available for less than $20,000 and includes everything to get up and running: the two R12 five-axis robot arms mounted on the carousel, two K11R controllers, RoboForth II software, intuitive teach pad, simple interfacing with other equipment, cables, manuals, a two-year warranty and unlimited free technical support.
Tandem R125 features two 5-axis vertically articulated robot arms mounted to programmable carousel. Also included are 2 interconnected K11R robot controllers enabling communications to synchronize motions of both robots or allowing robots to alternate turns while performing one task. RoboForth II software, teach pad, equipment interfacing, and cables are included in industrial system.
Innorobo attracts top range leaders, pioneers and researchers with international prominence.
This is to announce our latest Product Innovation, the Model MMP D33-455D-24V GP81-029 DC Gearmotor. The fully reversible Gearmotor operates with a 24V DC Input, while consuming just 14 A of current. Adding to its versatility, the unit is designed with a rear shaft extension, and threaded mounting holes for an integrally mounted optical encoder. This unique design features a High Efficiency Planetary Gearing, High Output Power to size & weight ratio, Low Speed and Low Noise, in a Compact, Lightweight (Just 11 Pounds!) 24 Volt DC Gearmotor. Please find attached the Press Release, Technical Specification Sheet, and a Photograph of this exciting new "Built in the USA" product. Typical uses for this "Compact, Lightweight" 24 Volt DC Gearmotor would include Mobility & Accessibility Equipment, Autonomous/Robotic Vehicles, UGV's, UUV's, Alternative Energy Equipment, including Solar Tracking, Linear Actuators, Automotive Accessories, Material Handling Equipment, Moving Target Equipment, Rotating Signage, and battery powered Electric Utility Vehicles of all kinds. This unit is able to develop its full continuous output torque of 136 In Lbs. at 140 RPM, while consuming 28.6 Amps of current. That translates to a long life battery charge, quiet operation, and lower cost drive electronics, to mention just a few of the many benefits available to the user..
Pressure Sensor Market is Expected to Reach $7.34 Billion at a CAGR of 6.3% from 2012 to 2017 by MarketsandMarkets
Pressure Sensor market research report categorizes the global market on the basis of technologies, applications and geographical analysis; forecasting revenue and analyzing trends in the pressure sensor market.
Record turnout and brisk sales show that manufacturing in the U.S. has a bright future.
Records 6496 to 6510 of 7940
Industrial Robotics - Featured Product
Schmalz Technology Development - Vacuum Generation without Compressed Air - Flexible and Intelligent
• Vacuum generation that's 100% electrical; • Integrated intelligence for energy and process control; • Extensive communication options through IO-Link interface; Schmalz already offers a large range of solutions that can optimize handling process from single components such as vacuum generators to complete gripping systems. Particularly when used in autonomous warehouse, conventional vacuum generation with compressed air reaches its limits. Compressed air often is unavailable in warehouses. Schmalz therefore is introducing a new technology development: a gripper with vacuum generation that does not use compressed air. The vacuum is generated 100% electrically. This makes the gripper both energy efficient and mobile. At the same time, warehouses need systems with integrated intelligence to deliver information and learn. This enables the use of mobile and self-sufficient robots, which pick production order at various locations in the warehouse. Furthermore, Schmalz provides various modular connection options from its wide range of end effectors in order to handle different products reliably and safely.