New DGII Rotary Actuators with AZ Series DC Input Drivers

DGII Rotary Actuators with AZ Series Line-up Now Expanded to Include 24/48 VDC Drivers

Oriental Motor is pleased to announce the latest addition to the expanded line-up of our popular DGII Series rotary actuators, which now includes two new DC input AZ Series driver options.


As the demand for a complete, high accuracy, energy efficient and cost saving rotary actuator systems continues to increase, Oriental Motors addresses this demand with the introduction of the AZ Series DC input drivers. This allows for more applications that are using DC power to be considered. The DGII rotary actuators with AZ Series can work in traditional applications where positional accuracy is needed or in applications where PLC or Touch Screens (HMI) are used, and without the need for additional and expensive module(s) added to the PLC. The end result is an efficient and complete product available to a wider breadth of master controller types and control methods.

The new 24/48 VDC driver options is available for both the DGM85 and DGM130 DGII standard models or models with built-in electromagnetic brake. In addition to the new 24/48 VDC drivers, the expanded AZ Series product line-up also includes AZ Series Pulse Input Driver with built-in RS-485 communication and multi-axes driver with EtherCAT communications.

Optional re-designed mounting pedestals for the DGII rotary actuators with AZ Series motors are also available. This is a useful installation pedestal that enables the DGII Series to be used as a direct drive motor. Applications that require height and installation from the side can also be performed, expanding the range of available operations.

Visit our web site to learn more about the DGII Series rotary actuators:
http://www.orientalmotor.com/rotary-actuators/rotary-actuators.html

ABOUT ORIENTAL MOTOR
Since its founding in Japan in 1885, Oriental Motor has been a world leader in motion systems. For over a century we have concentrated on technological advancement and product design improvement—an emphasis evident in the sophisticated devices we market today. Oriental Motors sales and service network is international, with offices throughout North America, Europe and Asia. Domestically, ORIENTAL MOTOR U.S.A. CORP. was established in 1978.

Featured Product

The ERT150 - Dorner’s Next Evolution of Edge Roller Technology Conveyors

The ERT150 - Dorner's Next Evolution of Edge Roller Technology Conveyors

The next evolution in Dorner's Edge Roller Technology conveyor platform, the ERT®150, is ideal for small and light-load assembly automation, as well as medical and medical-device assembly application. The ERT platform is the only pallet conveyor of its kind available with an ISO Standard Class 4 rating for cleanroom applications. Earning the ISO Standard 14644-1 Class 4 rating means Dorner's ERT150 will conform and not contribute to the contamination of cleanrooms to those standards. As implied by its name, the ERT150 (Edge Roller Technology) uses rollers to move pallets through the conveyor smoothly with no friction (a byproduct often seen in belt-driven platforms). The conveyor's open design eliminates concerns of small parts or screws dropping into rollers and causing conveyor damage or jamming. The ERT150 is suited to operate in cleanroom environments requiring a pallet handling conveyor. It is capable of zoning for no or low-back pressure accumulation and is ideal for automation assembly applications within industries including medical devices, electronics, consumer goods among others.