Toyota Invests $1 Billion in AI and Robots, Will Open R&D Lab in Silicon Valley
By Erico Guizzo and Evan Ackerman for IEEE Spectrum: Today in Tokyo, Toyota announced that it is investing US $1 billion over the next five years to establish a new R&D arm headquartered in Silicon Valley and focused on artificial intelligence and robotics. The Toyota Research Institute (TRI) plans to hire hundreds of engineers to staff a main facility in Palo Alto, Calif., near Stanford University, and a second facility located near MIT in Cambridge, Mass.
Former DARPA program manager Dr. Gill Pratt, an executive technical advisor at Toyota, was named CEO of TRI, which will begin operations in January. Toyota president Akio Toyoda said in a press conference that the company pursues innovation and new technologies “to make life better for our customers and society as a whole,” adding that he wanted to “work with Gill not just because he’s an amazing researcher and engineer, but because I believe his goals and motivations are the same as ours.” Cont'd...
SkyTech 2016 - UAV Conference & Exhibition
SkyTech 2016 is a two-day B2B tradeshow for the commercial UAV industry. In 2016 SkyTech will incorporate an exhibition, three conferences, workshops, product launches, live demonstrations and marketing opportunities for the commercial UAV community.
Skype founders invent self-driving robot that can deliver groceries for £1
By Sophie Curtis, video by Robert Midgley: You've heard of Amazon's plan to deliver packages using drones; now a new company called Starship is promising to disrupt local delivery with the launch of a self-driving robot that can deliver groceries to customers' doors in under 30 minutes for less than £1.
The Starship robot has been developed by Skype co-founders Ahti Heinla and Janus Friis. It drives on pavements at an average speed of 4mph, and uses proprietary mapping and navigation technology to avoid crashing into obstacles, (check out the video we made). Cont'd...
3D Printing and Acoustics: Rapid Prototyping of Sound Diffusers
By being able to design diffusers in 3D and print them, we streamline the prototyping process tremendously. We can do virtual simulations with the 3D models to get a sense of the effectiveness, and we can make aesthetic or functional changes before its printed.
Spreading like Wildfire
The Yosemite incident, and others in America and Australia, are representative of wider discussions that need to be brought to the publics doorstep if respect for when and where to use drone technology can be instilled as an agreed-upon standard of general practice.
New Flight: Despite Hurdles, Drones Are Taking Off
The drone market will represent more than $4.8B in hardware and software sales by 2021.
Leeds could become the first 'self-repairing city' with a fleet of robotic civil servants
By Chloe Olewitz for Digital Trends: Most people don’t know a whole lot about the city of Leeds other than its distinct regional accent, but believe it or not, local Leeds University is actually known for being a pioneering research leader in the field of robotics. The university’s School of Civil Engineering has put together a key research team that is currently developing a fleet of civil service robots and drones that would effectively turn Leeds into a self-repairing city.
The robotics research project is funded with £4.2M ($6.5M) of national funds, focusing on autonomous machines that would fix infrastructure issues across the city of Leeds, and perhaps, eventually, beyond. Leeds’ robot fleet will focus on robotic fixes for citywide issues like burst or damaged utility pipes, broken or nonfunctional street lights, and road fractures that disturb drivers on their way to anywhere.
Three main branches of the project cover the functions of the Leeds robots: Perch and Repair; Perceive and Patch; and Fire and Forget. The Perch and Repair segment covers research into robotic drones that can land, or “perch” like birds atop tall structures like street lamps or building-mounted civil structures. The Perceive and Patch team leads research into drones that can survey popular roads or even particularly dangerous ones in order to identify and repair potholes where they exist, and in the future, even prevent them before they occur. Cont'd...
Driverless Taxi Experiment to Start in Japan
By JUN HONGO for The Wall Street Journal: Japan’s cabinet office, Kanagawa prefecture and Robot Taxi Inc. on Thursday said they will start experimenting with unmanned taxi service beginning in 2016. The service will be offered for approximately 50 people in Kanagawa prefecture, just south of Tokyo, with the auto-driving car carrying them from their homes to local grocery stores.
According to the project organizers, the cabs will drive a distance of about three kilometers (two miles), and part of the course will be on major avenues in the city. Crew members will be aboard the car during the experiment in case there is a need to avoid accidents.
Robot Taxi Inc., a joint venture between mobile Internet company DeNA Co. and vehicle technology developer ZMP Inc., is aiming to commercialize its driverless transportation service by 2020. The company says it will seek to offer unmanned cabs to users including travelers from overseas and locals in areas where buses and trains are not available. Cont'd...
Where are the Top Robotics Employers?
The below table shows the location, the number jobs & the key employers. We only searched for jobs that had "Robotics" in the job title.
Era of Drones in Japan and Challenges
In Japan, a few technology experts are calling 2015 "Year One of the Era of the Drone."
Three Tiny Robots that Could Change Healthcare
Imagine a world, where Tiny robots can go inside your body, see whats wrong it with and target therapies only for that area. Here are 3 Tiny Robots to make you believe your imagination could come true.
Can Technology be Too Disruptive?
Disruptive innovation creates new markets, disrupts existing markets and replaces prior technology and thereby evolving existing markets to be productive, sustaining and value-driven.
euRathlon 2015 Challenge
Sixth day of euRathlon 2015 - euRathlon 2015 Grand Challenge - Part 2
25 September 2015, Piombino, Italy.
View euRathlon 2015 Grand Challenge - Part 1. Day Five
View euRathlon 2015 Challenge: Two-domain Scenarios. Day Four.
View euRathlon 2015 Challenge: Two Domain Trials - Day Three
View euRathlon 2015 Challenge: Single Domain Trials - Day Two
View euRathlon 2015 Challenge: Single-domain trials - Day One
The 3D Printshow - Learn About 3D Printing
The 3D Printshow is the first dedicated 3D printing event anywhere in the world.
WowWee brings expensive university bots to store shelves
By Corinne Iozzio for Scientific American: Hong Kong–based WowWee's success stems from bringing university research projects to life that might otherwise languish in the prototype stage. A licensing agreement with the Flow Control and Coordinated Robotics Labs at the University of California, San Diego, for example, provides WowWee with access to patents and the labs with a healthy cash infusion. The collaboration has already netted a series of toy robots that balance like Segways. More recently, the avionics lab at Concordia University in Montreal began working with the company to perfect flight algorithms for a four-rotor drone. Next, chief technology officer Davin Sufer says he has his eye on the Georgia Institute of Technology and its work with swarming behaviors, which would allow a group of robots to function in tandem.
In the case of Switchbot, WowWee adapted a locomotion system developed in part by former U.C. San Diego student Nick Morozovsky. The robot moves on tank-tread legs either horizontally to navigate uneven terrain or on end to stand and scoot fully upright. Morozovsky built his prototype with off-the-shelf parts, including a set of $50 motors. The motors were a compromise; each one had the size and torque he wanted but not the speed. Over the past few years he has worked with WowWee to customize a motor with the exact parameters needed and to cut the final cost of the part down to single digits.
That back and forth yields low-cost, mass-producible parts, which means university-level robotics could become available to everyday people. “One of the reasons I went into mechanical engineering was so I could create real things that have a direct impact,” Morozovsky says. “I didn't expect that to necessarily happen in the process of grad school.” Cont'd...
Records 1126 to 1140 of 1297
First | Previous | Next | Last
Featured Product
High Performance Servo Drives for localized and distributed control applications from Servo2Go.com
Engineered to drive brushless and brush servomotors in torque, velocity or position mode, Servo2Go.com offers a broad selection of servo drives in a wide range of input voltages and output power levels.
Robotics and Automation - Featured Company
Encoder Products Company
At Encoder Products Company, we specialize in the encoders that provide you with motion feedback. EPC has been a leading designer and manufacturer of motion sensing devices for more than 50 years, we understand that each industrial automation application is different, and you need encoders that fit the needs of your applications. Our encoders are highly configurable, offer an array of shaft or bore sizes, output types, connector types, mounting options, and resolutions as high as 65,536 CPR.
