New PMDC Drives from ElectroCraft are 95% efficient

The ElectroCraft CompletePower™ PMDC drive products are ideal fit for those motion control applications that require a simple solution but must not compromise on performance.

The ElectroCraft CompletePower™ PMDC drive products are ideal fit for those motion control applications that require a simple solution but must not compromise on performance. With both linear and PWM drive technologies, we have a solution for the most demanding or noise sensitive application.


These servo-amplifiers are built into a fully enclosed rugged aluminum case. Mode of operation is set by simple DIP switches. These drives handles a wide range of power supply voltages (from 11 to 70VDC) for a variety of power input requirements. Inputs include current limit, set value input, enable, tach and a ramp function. The pulse-width modulated power stage utilizes 95% efficient MOSFET-technology and is protected against over-current and over-temperature.

The full line of CompletePower™ PMDC drives feature:

• DC input power
• 4 quadrant operation
• Easy-to-use switches to select functionality
• Simple screwdriver required for system set-up
• Common connectors for easy installation
• For Brush-Commutated PMDC Motors, from 75W to 1260W

CLICK BELOW for more information on the PMDC Drives from ElectroCraft.
https://www.servo2go.com/products/servo-motors-drives/pmdc-drives/

For more information, please contact:

EDITORIAL CONTACT:
Warren Osak
warren@servo2go.com
Toll Free Phone: 877-378-0240
Toll Free Fax: 877-378-0249
www.servo2go.com


Tags: ElectroCraft, DA4303, DA4709, DA4718, Servo Amplifier, Servo Drive, Servo2Go

Featured Product

maxon motor’s - Exoskeleton Joint Actuator

maxon motor's - Exoskeleton Joint Actuator

A brushless DC motor solution for use in hip and knee exoskeletons. This complete joint actuation unit consists of motor, gearhead, encoder and position controller. Fitting absolute encoder directly at the joint rotation provides designers increased positioning accuracy. The unit will deliver 54Nm of continuous torque and 120Nm on a 20% duty cycle. The system can be operated on supplies between 10 and 50V DC and the actuation speed is up to 22rpm.