ADLINK Launches Powerful Embedded Vision System, EOS-1220
Equipped with 3rd generation Intel® Core™ i7 quad-core processors and GigE Vision compliance
Murata Machinery Turning Division Adds New Dealer Technical Equipment
Technical Equipment Sales will now be a CNC machine tool dealer for the Muratec brand in Ohio, Indiana & Kentucky.
MoveIt! Software Framework for Motion Planning in ROS
From ROS.org:
Willow Garage is proud to announce the initial release of MoveIt! : new software targeted at allowing you to build advanced applications integrating motion planning, kinematics, collision checking with grasping, manipulation, navigation, perception, and control. MoveIt! is robot agnostic software that can be quickly set up with your robot if a URDF representation of the robot is available. The MoveIt! Setup Assistant lets you configure MoveIt! for any robot, allowing you to visualize and interact with the robot model quickly.
MoveIt! can incorporate both actual sensor data and simulated models to build an environment representation. Sensor information (3D) can be automatically integrated realtime in the representation of the world that MoveIt! maintains. CAD models can also be imported in the same world representation if desired. Collision-free motion planning, execution and monitoring are core capabilities that MoveIt! provides for any robot. MoveIt! updates its representation of the environment on the fly, enabling reactive motion planning and execution, which is essential for applications in human-robot collaborative environments.
MoveIt! interfaces with controllers through a standard ROS interface, allowing for ease of inter-operability, i.e. the ability to use the same higher-level software with a variety of robots without needing to change code. MoveIt! is architected to be flexible, using a plugin architecture to allow users to integrate their own custom components while still providing out-of-the-box functionality using default implementations. Furthermore, the ROS communication and configuration layer of MoveIt! is separated from core computational components such as motion planning or collision checking, the latter components being provided separately as C++ libraries.
Available here.
UAV Technology for Campus Security Being Developed at University of Alabama
With campus safety and security in mind, engineering students at The University of Alabama in Huntsville are working with the campus police department to perfect unmanned aerial vehicle (UAV) technologies for use on-campus.
NRL Shatters Endurance Record for Small Electric UAV
This flight shatters their previous record of 26 hours and 2 minutes set in 2009 using the same vehicle, but with gaseous hydrogen stored at 5,000 pounds per square inch (psi).
Evana Automation Delivers Lean, 21-Step Assembly and Test System to AAM
Evana utilizes diverse technologies to specialize in motion control, robotics integration and system architecture by linking production equipment, material handling systems, data collection, networking, as well as computer software and hardware into flexible, unified technology.
Development Projects Selected to Manage NASA's Unmanned Aircraft System Challenge Prize Competition
NASA has selected Development Projects Inc. of Dayton, Ohio, to manage a new Centennial Challenge prize competition involving unmanned aircraft systems in 2014.
Stäubli Announces Technology Days Open House
An Up-Close Look at New Innovations in Robotics, Software and Connection Technology:
Stäubli Robotics Announces the Robot Industry's most comprehensive Load Balancing Software Package
Perfect solution to sorting, and pattern making, with variable infeed and the requirement for a stable out flow for post processes
RIO (Raspberry IO) Card
Roboteq, Inc launched a kickstarter project named RIO (for Raspberry IO) and aimed at creating an intelligent I/O card that stacks over the $35 Raspberry PI Linux Single Board computer.
Power for the PI from any DC source
RIO includes a 3A DC/DC converter that may be connected to a 10V to 40V DC supply, and generates the 5V needed by the PI and the RIO cards.
21 I/O lines to Connect Just About Anything
RIO provides a total of 8 digital outputs rated up to 1A and 30V max, which may also be used as digital inputs.
The card includes 13 inputs, each of which can be configured as a digital input, 0-5V analog input with 12-bit resolution, or as a timer input. In the timer mode, the inputs can capture pulse width, frequency, quadrature encoder counts, or duty cycle. Most of the input pins can also be configured as PWM outputs for driving RC servos, or dimmable lights.
Serial Connectivity and CAN Networking
Two serial ports are present on the card. One is fully RS232 compliant with programmable baud rate up to 115200 bits/s for connection to motor controllers, scanners, PC or any other RS232 device. The second is RS485 compatible, enabling, among other things, DMX512 connectivity to light show equipement. Optionally, a 3rd serial port uses TTL levels for direct interface to non-buffered, non-inverted USARTs as these found on most microcontrollers, like the Arduino.
A CAN bus interface is also present on the Rio card for connecting to CAN-compatible device, on a low cost twisted pair network at speeds up to 1Mbit/s.
Full Kickstarter details here.
WineHawk Labs Becomes Precision Hawk in Effort to Turn Focus to Precision Agriculture Market
Precision Hawk, an unmanned aerial systems and remote sensing company, uses re-branding as an opportunity to launch new model of UAV platform.
University of Zurich AI Lab Uses Baumer Sensors to Monitor Movement of "Roboy"
Position sensors allow humanoid robot to move and respond like a child.
RoboLabs, Inc. Develops the SmartMow, a Safe Robot Lawn Mower that Doesn't Require Perimeter Wire
SmartMow robot lawn mower uses advanced navigation, cameras, and GPS.
QinetiQ North America to Display Innovative Solutions at SOFIC 2013
QinetiQ North America delivers world-class technology and responsive solutions to government agencies and commercial customers for many of their most urgent and complex challenges.
3D Printer Kit from Cooking Hacks Launches with Hands-On Training
Open Hardware DIY Kit and Workshops for Makers Bring 3D Printing to New Public
Records 10126 to 10140 of 12288
First | Previous | Next | Last
Industrial Robotics - Featured Product
igus® - triflex® R robot dresspacks
Properly managed cables on a multi-axis robot are the difference between successful, failure-free operation and frequent unplanned downtime and lost profits. Discover how triflex® robot dresspacks are designed to protect cables in multi-axis motion - extending cable life, minimizing costs, and reducing unplanned downtime.
Robotics and Automation - Featured Company
OnLogic
A global industrial PC manufacturer and solution provider focused on hardware for the IoT edge, OnLogic designs highly-configurable computers engineered for reliability. Their systems operate in the harshest environments and power innovation in the evolving Internet of Things. Founded in 2003 as Logic Supply, the company has served more than 70,000 customers. OnLogic has offices in the US, Netherlands, Taiwan and Malaysia.
