President Signs FAA Bill To Integrate Unmanned Vehicle Systems By 2015
President Obama has signed the FAA Modernization and Reform Act 2012. The bill will allow the FAA to rebuild its air traffic control system to the next generation technology which will include switching from radar to a GPS air traffic control system. The law will open up the skies to unmanned drones by September 2015.
According to AUVSI (Association for Unmanned Vehicle Systems International), major UAS provisions in the FAA bill include:
Setting a 30 Sept., 2015 deadline for full integration of UAS into the national airspace
Requiring a comprehensive integration plan within nine months
Requiring the FAA to create a five-year UAS roadmap (which should be updated annually)
Requiring small UAS (under 55 pounds) to be allowed to fly within 27 months
Requiring six UAS test sites within six months (similar to the language in the already-passed defense bill)
Requiring small UAS (under 55 pounds) be allowed to fly in the U.S. Arctic, 24 hours a day, beyond line-of-sight, at an altitude of at least 2,000 feet, within one year
Requiring expedited access for public users, such as law enforcement, firefighters, emergency responders
Allowing first responders to fly very small UAS (4.4 pounds or less) within 90 days if they meet certain requirements
Requiring the FAA to study UAS human factors and causes of accidents
Humanoid "Projet Romeo" Greeting Video
Projet Romeo is being developed by Aldebaran Robotic, the same group working on the NAO . Project Romeo is a 4 foot tall humanoid designed to assist elderly and disabled individuals in their daily activities. The robot will be able to walk through a home, fetching food from the kitchen, taking out the garbage, and acting as a loyal companion who helps entertain its owners and keep tabs on their health. The project started in 2009 but the company hasn't released much info about it until now. Below is the first video of Projet Romeo, sitting in a chair, talking and moving his arms and hands:
Origami Robots
Ramses Martinez, Carina Fish, Xin Chen and George Whitesides have published a paper describing a soft pneumatic actuator constructed by combining paper with a silicone elastomer. On pneumatic inflation, these actuators move anisotropically, based on the motions accessible by their composite structures. They are inexpensive, simple to fabricate, light in weight, and easy to actuate. This class of structure is versatile: the same principles of design lead to actuators that respond to pressurization with a wide range of motions (bending, extension, contraction, twisting, and others). Paper, when used to introduce anisotropy into elastomers, can be readily folded into 3D structures following the principles of origami; these folded structures increase the stiffness and anisotropy of the elastomeric actuators, while being light in weight. These soft actuators can manipulate objects with moderate performance; for example, they can lift loads up to 120 times their weight. They can also be combined with other components, for example, electrical components, to increase their functionality.
LS3 AlphaDog Heads Outdoors
Boston Dynamics' LS3 is a four legged military robot designed to go anywhere and carry up to 400 lbs of gear with enough fuel for missions covering 20 miles. The development of LS3 is being funded by DARPA and the US Marine Corps. The project has been in development for sometime and now DARPA released a new video of the prototype traversing hills and uneven ground as they test it outdoors.
Liquid Silver Printed Circuit Boards
University Of Illinois engineers have demonstrated a method of printing liquid silver onto flexible surfaces to create conductive trails. The advantage of silver is that the particles are much smaller than other conventional electronic ink making it easier to print using a inkjet nozzle. Hopefully in the future this silver ink will make printing circuit boards with a simple desktop printer a reality.
Britain's UAV Industry Plans New PR Effort
Companies seeking to enable the routine use of surveillance drones across Britain are planning a long-term public relations effort to counter the negative image of the controversial aircraft. The Unmanned Aerial Vehicle Systems Association (UAVSA), a trade group that represents the drone industry to the UK government, has recommended drones deployed in Britain should be shown to "benefit mankind in general", be decorated with humanitarian-related advertisements, and be painted bright colours to distance them from those used in warzones, details from a UAVSA presentation show.
Plans are also under way to establish corridors of segregated airspace to fly drones – or UAVs – between restricted "danger zones" (airspace where test flights take place) in isolated parts of England and Wales.
A series of presentations given by industry figures in recent months show public opposition is considered a major hurdle. UAVSA has discussed how it could use the media to disseminate favourable stories, creating a narrative that presents the introduction of drones in the UK as part of a "national mission".
Interview - Unmanned Arial Vehicle (UAV) Tech
You can pretty much give UAVs any use you want, provided that you have enough imagination and patience to see that function come alive. Some of the most common uses right now and in the future will probably be related to photography, mapping, surveillance, surveying and any other activities that might involve risking human lives.
North American Robotics Industry Breaks Records For 2011
A total of 19,337 robots valued at $1.17 billion were sold to companies in North America, beating the previous record of 18,228 robots sold in 2005. When sales by North American robot suppliers to companies outside North America are included, the totals are 22,126 robots valued at $1.35 billion.
Robots sold to automotive component suppliers in North America jumped 77% over 2010, while robots sold to automotive OEMs increased 59%. Sales to non-automotive customers grew 27%, led by metalworking industries (+56%) and semiconductor/electronics/photonics (+24%).
GRASP Lab Demonstrates Nano Quadrotors Swarm
The GRASP Lab at the University of Pennsylvania have developed tiny versions of their quadrotor swarming robots. The swarm is able to align in complex formations and remain in formation while traveling through small areas like windows or doors.
TurtleBot Xtion Mounting Kit
The ASUS Xtion Pro Live is ASUS' Kinect alternative. I Heart Engineering now sells a Xtion Mounting Kit for the TurtleBot personal robot development platform . The mount is available for $39.95 here or can be purchased with a ASUS Xtion Pro Live for $249.95 here .
Tactical Micro-Robots Prove That Less Is Often More
Designed to be thrown up to 120 feet, the Throwbot could also move quietly throughout a structure and send back real-time video that revealed the layout of rooms, the location of barricaded subjects and the condition of hostages.
Interview - 3D Printing with the Cube and Cubify.com
Cube™ is the first 3D printer specially designed for the home. From the sleek industrial design to the dimensions and weight - Cube will fit right in from the kitchen to the family room. Retailing for $1299.00 the Cube is ready to print right out of the box, you initialize like you would a cell phone and we will download 50 free print files to you immediately. The printer includes a cartridge of material that will deliver 8 - 15 average size models in a color of your choice - then simply reorder your next cartridge for just $49.99. Models will cost a few dollars to up to $10.00 for a large model.
The printer dimensions are 14 X 14 X 18 inches high and it weighs under 9 pounds making Cube portable . . easy to use, fun to watch - and fit right into your home as a new member of your creative 3D family
Interview - Robotics in the Military
Mr. Pedersen founded RE2, Inc. in July of 2001 to advance the state of the art in robotics technologies for the military. Since that time, Mr. Pedersen has grown the company to over 60 employees with work in all aspects of robotics from innovative research in actuation and control to manufacturing of highly complex 2-arm manipulation systems. Mr. Pedersen currently serves as the Vice Chair of the Robotics Division of National Defense Industry Association (NDIA) and sits on the NDIA Board of Trustees. He also sits on the Robotics Technology Consortium (RTC) Board of Directors and the OSD Joint Ground Robotics Enterprise Senior Steering Group.
Unlock the Secret to Selling to the Military
Selling to the military is not easy, but if you are persistent and take one step at a time, asking questions along the way, military sales can add substantially to your bottom line.
$25 Raspberry Pi Credit-card Sized Computer Almost Ready For Shipment
The Raspberry Pi is a ARM based single-board computer developed to run Linux for just $25 ($35 for model B with WiFi). The board contains an ARM1176JZFS, with floating point, running at 700Mhz, and a Videocore 4 GPU. The GPU is capable of BluRay quality playback, using H.264 at 40MBits/s. It has a fast 3D core accessed using the supplied OpenGL ES2.0 and OpenVG libraries. The board has an HDMI port, one USB 2.0 port, one micro USB port for power, an audio jack, RCA video out and a SD card slot.
They aren't taking orders yet but you can track the status by joining their mailing list here .
Records 1846 to 1860 of 1960
First | Previous | Next | Last
Industrial Robotics - Featured Product
Midwest Motion Products is a leading provider of robust and reliable Motion Control Products.
MMP specializes in supplying high-quality Brushed & Brushless DC Motors & Gearmotors for Robotics and Automation Equipment with a wide range of motor windings and gear ratios. With an impressive track record of more than 8,000 released DC Gearmotors designs and over 2,000,000 individual part numbers, we are renowned for our ability to handle large-scale orders. Due to our huge on-hand inventory, we are also well known for lightning-fast delivery of our standard products. We take pride in our dedicated customer service and our team of knowledgeable sales and engineering experts who are ready to assist you with custom design solutions tailored to your specific application. Additionally, we also offer a wide range of complimentary products, such as DC Motor Controls, DC Linear Actuators, AC-DC power Supplies, and DC Servo Amplifiers and others.
