Trimble Adds Unmanned Aircraft System to its Agriculture Portfolio for Aerial Imaging and Mapping
The Trimble UX5 system flies at 80 kilometers/hour (50 mph) and is stable in significant crosswinds and even light rain.
LMI Technologies Launches New Gocator All-In-One 3D Smart Snapshot Sensor
Gocator 3100 series delivers 3D point cloud acquisition, measurement, and control decision capabilities in a single package
LORD MicroStrain® Sensing Systems Introduces Cost-Effective Tactical-Grade GPS-Aided Inertial Navigation System
Achieves tactical-grade performance with the smallest and lightest package in its class
Humanistic Robotics Announces Product Launch and First Users of its Safe Remote Control System
Advanced, ergonomic controller utilizes HRI's proprietary SafetySenseTM technology
MMP Releases 48V DC Gearmotor: 18 IN Lbs of continuous torque at 782 RPM, 354 In Lbs Peak Torque
27 April 2012: "IP-54" Sealed, High Power, 48 Vdc Gearmotor Develops 18 Lb. In. Torque at 782 RPM
Midwest Motion Products of Watertown, Minnesota, is pleased to announce the release of a new DC Gear- Motor, Model #: MMP-D33-455D-48V GP81-03.7 - Accepting any 48 Volt DC source, including battery power, this robust Gear Motor measures just 3.2" (max) Diameter, by 8.4" long and has a keyed output shaft of 19mm diameter by 40mm long. Easy mounting is accomplished with 4 "face mount" M6 threaded holes, equally spaced on a 65mm Dia. B.C. or an optional NEMA34 Flange, as shown on the attached Photo.
The output of this fully reversible gearmotor is rated for 18 IN-LBS continuous torque, at 782 RPM, and 354 IN-LBS Peak. Despite its compact size, and weight of approximately 10 pounds, it's an efficient design, requiring just 5.1 Amps at 48 Volts DC to generate its Full-Load Torque. This translates into longer battery charge, very LOW-NOISE operation, and lower cost drive electronics. Motor windings for 12v, 18v, 24v, 28v, 36v, 42v, 60v & 90 Volts are available.
MMP Inc Releases New 12V DC Gearmotor capable of 136 Lb In of torque aat 35 RPM, with IP54 Rating
03 Sept 2011: "IP-54" Sealed, Low Current, 12 Vdc Gearmotor Develops 136 Lb. In. Torque at 35 RPM
Midwest Motion Products, Inc. of Watertown, Minnesota, is pleased to announce the release of a new DC Gear Motor, the Model No. MMP TM57-12V GP52-124. Accepting any 12 Volt DC source, including solar or battery power, this robust Gear Motor measures just 2.24" in Diameter, by 7.76" long, and has a keyed output shaft of 12mm diameter by 25mm long. Easy mounting is accomplished with 4 "face mount" M5 threaded holes, equally spaced on a 40mm Dia. B.C.
The output of this reversible gearmotor is rated for 136 Lb. In. (15.3Nm) torque, at 35 RPM. Despite its compact size, and weight of approximately 4 pounds, it's an efficient design, requiring just 7.2 Amps at 12 Volts DC to generate its Full Load Torque. That translates into long life battery charge, very low noise operation, and lower costs for related drive electronics. Motor windings for 24V, 28V, 36V, 42V, 48V, 60V & 90 Volts are available.
This unique design is rated at an "IP 54" protection level for operation in harsh environments. Variable Speed control can be accomplished with our fully compatible Speed Controls, Model MMP 25A-12V, or
MMP Releases new 12V DC Gearmotor - 136 In Lbs torque at 140 RPM output speed
Midwest Motion Products of Watertown, Minnesota, is pleased to announce the release of a new DC Gear- Motor, Model # MMP-D33-455A-12V GP81-029 - Accepting any 12 Volt DC source, including battery power, this robust Gear Motor measures just 3.2" (max) Diameter, by 9.25" long and has a keyed output shaft of 19mm diameter by 40mm long. Easy mounting is accomplished with 4 "face mount" M6 threaded holes, equally spaced on a 65mm Dia. B.C. or an optional NEMA34 Flange, is also available.
The output of this fully reversible gearmotor is rated for 136 IN-LBS continuous torque, at 140 RPM, and 1062 IN-LBS (120 Nm) Peak Torque. Despite its compact size, and weight of approximately 11 pounds, it's an efficient design, requiring just 28.6 Amps at 12 Volts DC to generate its Full-Load Torque. This translates into long battery charge, very LOW-NOISE operation, and lower cost drive electronics. Motor windings for 18v, 24v, 28v, 36v, 42v, 48v, 60v & 90 Volts are available.
MMP RELEASES NEW 24V DC PLANETARY GEARMOTOR FOR ROBOTICS & AUTOMATION APPLICATONS
This is to announce our latest Product Innovation, the Model MMP D33-455D-24V GP81-029 DC Gearmotor.
The fully reversible Gearmotor operates with a 24V DC Input, while consuming just 14 A of current.
Adding to its versatility, the unit is designed with a rear shaft extension, and threaded mounting holes for an integrally mounted optical encoder.
This unique design features a High Efficiency Planetary Gearing, High Output Power to size & weight ratio, Low Speed and Low Noise, in a Compact, Lightweight (Just 11 Pounds!) 24 Volt DC Gearmotor.
Please find attached the Press Release, Technical Specification Sheet, and a Photograph of this exciting new "Built in the USA" product.
Typical uses for this "Compact, Lightweight" 24 Volt DC Gearmotor would include Mobility & Accessibility Equipment, Autonomous/Robotic Vehicles, UGV's, UUV's, Alternative Energy Equipment, including Solar Tracking, Linear Actuators, Automotive Accessories, Material Handling Equipment, Moving Target Equipment, Rotating Signage, and battery powered Electric Utility Vehicles of all kinds.
This unit is able to develop its full continuous output torque of 136 In Lbs. at 140 RPM, while consuming 28.6 Amps of current. That translates to a long life battery charge, quiet operation, and lower cost drive electronics, to mention just a few of the many benefits available to the user..
Zaber's New A-LST-C Series High Load, Motorized Linear Stages with Dust Covers
Zaber's A-LST-C stages are computer-controlled and have travel ranges from 254 mm up to 1500 mm. These stages are available with various lead screw pitches so you can select the device with the resolution and speed capability that you need. Zaber's innovative stage design is capable of speeds up to 420 mm/s, and can support loads up to 100 kg
Maxon's New ESCON 36/2 - A Powerful PWM Servo Controller
Maxon's new ESCON 36/2 DC is a 4-quadrant PWM servo controller for use with DC motors up to 72 Watt. This very fast digital current controller, with enormous bandwidth for optimal motor current/torque control, provides drift-free yet extremely dynamic speed behavior through a speed range of 1 to 150,000 rpm.
Records 1951 to 1960 of 1960
Featured Product
For over 25 years, Polyconn has privately labeled and manufactured customized products.
We can produce pneumatic hose and other pneumatic products to match your exact specifications. Our proficient engineering and quality management, coupled with outstanding customer service means Polyconn delivers high quality pneumatic components at competitive prices. Place your order or contact Polyconn for more information on our pneumatic hoses, pneumatic manifolds, Duratec® Pipe or any of our other top quality pneumatic products and components.
