Army, Academics Cite Progress on UAS, but Challenges Remain
Also includes developing counter-UAS defenses for the day when enemies also use unmanned aircraft to gather intelligence.
Electronics and High-Performance Computing Communities Sought for Microfluidic Cooling Demo
DARPA's ICECool seeks to demonstrate intrachip/interchip microfluidic cooling
MMP Releases 48V DC Gearmotor: 18 IN Lbs of continuous torque at 782 RPM, 354 In Lbs Peak Torque
27 April 2012: "IP-54" Sealed, High Power, 48 Vdc Gearmotor Develops 18 Lb. In. Torque at 782 RPM
Midwest Motion Products of Watertown, Minnesota, is pleased to announce the release of a new DC Gear- Motor, Model #: MMP-D33-455D-48V GP81-03.7 - Accepting any 48 Volt DC source, including battery power, this robust Gear Motor measures just 3.2" (max) Diameter, by 8.4" long and has a keyed output shaft of 19mm diameter by 40mm long. Easy mounting is accomplished with 4 "face mount" M6 threaded holes, equally spaced on a 65mm Dia. B.C. or an optional NEMA34 Flange, as shown on the attached Photo.
The output of this fully reversible gearmotor is rated for 18 IN-LBS continuous torque, at 782 RPM, and 354 IN-LBS Peak. Despite its compact size, and weight of approximately 10 pounds, it's an efficient design, requiring just 5.1 Amps at 48 Volts DC to generate its Full-Load Torque. This translates into longer battery charge, very LOW-NOISE operation, and lower cost drive electronics. Motor windings for 12v, 18v, 24v, 28v, 36v, 42v, 60v & 90 Volts are available.
MMP Inc Releases New 12V DC Gearmotor capable of 136 Lb In of torque aat 35 RPM, with IP54 Rating
03 Sept 2011: "IP-54" Sealed, Low Current, 12 Vdc Gearmotor Develops 136 Lb. In. Torque at 35 RPM
Midwest Motion Products, Inc. of Watertown, Minnesota, is pleased to announce the release of a new DC Gear Motor, the Model No. MMP TM57-12V GP52-124. Accepting any 12 Volt DC source, including solar or battery power, this robust Gear Motor measures just 2.24" in Diameter, by 7.76" long, and has a keyed output shaft of 12mm diameter by 25mm long. Easy mounting is accomplished with 4 "face mount" M5 threaded holes, equally spaced on a 40mm Dia. B.C.
The output of this reversible gearmotor is rated for 136 Lb. In. (15.3Nm) torque, at 35 RPM. Despite its compact size, and weight of approximately 4 pounds, it's an efficient design, requiring just 7.2 Amps at 12 Volts DC to generate its Full Load Torque. That translates into long life battery charge, very low noise operation, and lower costs for related drive electronics. Motor windings for 24V, 28V, 36V, 42V, 48V, 60V & 90 Volts are available.
This unique design is rated at an "IP 54" protection level for operation in harsh environments. Variable Speed control can be accomplished with our fully compatible Speed Controls, Model MMP 25A-12V, or
MMP Releases new 12V DC Gearmotor - 136 In Lbs torque at 140 RPM output speed
Midwest Motion Products of Watertown, Minnesota, is pleased to announce the release of a new DC Gear- Motor, Model # MMP-D33-455A-12V GP81-029 - Accepting any 12 Volt DC source, including battery power, this robust Gear Motor measures just 3.2" (max) Diameter, by 9.25" long and has a keyed output shaft of 19mm diameter by 40mm long. Easy mounting is accomplished with 4 "face mount" M6 threaded holes, equally spaced on a 65mm Dia. B.C. or an optional NEMA34 Flange, is also available.
The output of this fully reversible gearmotor is rated for 136 IN-LBS continuous torque, at 140 RPM, and 1062 IN-LBS (120 Nm) Peak Torque. Despite its compact size, and weight of approximately 11 pounds, it's an efficient design, requiring just 28.6 Amps at 12 Volts DC to generate its Full-Load Torque. This translates into long battery charge, very LOW-NOISE operation, and lower cost drive electronics. Motor windings for 18v, 24v, 28v, 36v, 42v, 48v, 60v & 90 Volts are available.
Precision Motion Controller for Closed-Loop Positioning Systems Released by PI
PI (Physik Instrumente) LP offers a new closed-loop digital motion controller for precision positioning systems, model C-884.4D.
Commercial Unmanned Aerial Systems Information Revenues to Total $2.3 Billion Through 2025 According to New Research from G2 Solutions
There is an established market for imagery and information within the U.S.
Forum Energy Technologies Announces Sale of a Large Trenching ROV and Two Work-class ROVs to Helix Energy
AZFirst Announces Go Daddy Sponsorship of FIRST® Robotics Competition 2013 Arizona Regional Robotics Competition
Go Daddy Is a "Friend of the Future" Sponsor
AUVSI Study Finds Unmanned Aircraft Industry Poised to Create 70,000 New Jobs in the U.S. in Three Years
New Study Finds Enormous Job Creation Potential Following Integration of Unmanned Aircraft into the National Airspace
Siemens SCALANCE Wireless LAN Controller Complies with IEEE 802.11n IWLAN Standard
Monitors up to 32 access points and client modules
Rethink Robotics Named Edison Awards Finalist
Rethink Robotics' Baxter Robot Will Be Recognized at Edison Awards Gala on April 25 in Chicago
Stäubli to Present Game-Changing Thermal Management Solutions at SEMI-THERM 29
Stäubli connectors meet the needs of a wide range of industries
At APEC, Green Plug to Introduce Greenscape - Visual Development Platform for Rapid Prototyping and Optimization of Controller Designs
Power Electronics Innovator Takes Next Step Toward Making
Digital Controllers Configurable, Price Competitive
Linear Robot Rails in High Cycle Applications
The aluminum construction of the IPR system makes the rail lighter for transport and set-up.
Records 7411 to 7425 of 9013
First | Previous | Next | Last
Featured Product
IPR Robotics - Right-Sized 7th Axis Robot Linear Rails
IPR Robotics offers a wide range of servo-driven 7th axis linear rails for industrial robots. These rails come in ten different sizes and are constructed from modular high strength extruded aluminum sections to handle payloads of 100 kg to 1600 kg or from steel to handle 2000 kg payloads. This variety of rail sizes allows each application to be sized correctly, controlling the space required and the price point. The drive train design of these rails utilizes helical gear-racks and is proven over 10 years to be repeatable and reliable, even in tough foundry applications.
