UltraFlex induction bonding steel mesh to synthetic wool
The demonstration had been done per request of a potential customer looking to achieve increased productivity and more reliable results for a bonding process used on the production line.
In a recent demonstration, UltraFlex showed how induction heating can replace traditional heating methods in yet another manufacturing process, achieving increased productivity and consistent, high-quality results every time, at a fraction of the usual time and costs.
The demonstration had been done per request of a potential customer looking to achieve increased productivity and more reliable results for a bonding process used on the production line.
The demo application required preheating of steel mesh and bonding it to a synthetic wool filter, while those were moving, mesh on top of the filter, on a conveyor line with a variable speed of ~0.1-0.3 m/s. The steel mesh was required to be preheated in only 3 zones, at a target temperature of up to 400 °C (752°F).
An UltraFlex induction heater from the UltraHeat SM series had been considered most appropriate for this heating scenario. UltraHeat SM are compact 5kW induction heaters operating with either water-cooled or air-cooled remote heat station. Thanks to their compact design, they can easily be integrated into a conveyor line. They feature adaptive digital phase control which provides efficient operation in the frequency range required for this heating application.
A flat induction sealing coil was also designed by UltraFlex and used to press the two materials and distribute the temperature to the zones required, as soon as the target temperature had been reached.
It took mere 1.5 seconds to complete this induction bonding process. The bonding achieved was highly reliable since the special induction heating coil prevented the synthetic wool from burning, while at the same time ensuring proper, precise heat distribution at the zones defined.
By replacing traditional heating methods with induction heating, the customer would not only increase productivity on the line. They would ensure consistent, high-quality results that did not depend on the operator's skills. The induction heating process would be completely safe - both for the operator and the environment - due to the lack of open flame, smoke and noxious emissions.
Find out more at:
https://ultraflexpower.com/
Contact us at:
+1.631.467.6814
uptnews@ultraflexpower.com
About UltraFlex Power Technologies:
UltraFlex Power Technologies (ultraflexpower.com) offers the most advanced and innovative digitally controlled induction heating equipment in the industry. Its compact modular and flexible systems are used for a wide variety of induction heating, casting and melting applications.
Featured Product
TM Robotics - Shibaura Machine THE SCARA range
The THE range from Shibaura Machine is an extensive line up of SCARA robots. Available in four arm lengths THE400 (400mm), THE600 (600mm) and the most recent THE800 (800mm) and THE1000 (1000mm), this range is suitable for assembly, handling, inspection and pick and place processes in varied industrial applications. The THE1000 boasts a 20kg payload capacity and an impressive 0.44 second cycle time, providing high speeds for processes with large components. In fact, the range has been recognised for as the price-to-performance leader compared to other SCARA models in its price range due to its impressive speed versus payload capacity.
