QinetiQ North America's TALON® Robot Selected by Czech and Polish Militaries
World-renowned robot expands international presence into Central Europe
Lehmann Aviation's LA100 UAV
Lehmann Aviation's LA100 is a fully autonomous UAV designed to capture 5 minutes of flight at the height of 80m-100m using a mounted GoPro camera. Camera can be mounted on the top of the wing for Oblique images (Hero, Hero2 or Hero3) or at the bottom of the wing for Vertical images (Hero3). You can also choose to fly with 2 cameras at the same time.
Intelligrated to showcase latest Alvey Robotics material handling solutions at Automate 2013
In-booth demonstration features robotic case packing, unpacking and palletizing capabilities
GstarCAD MC PRO: Over Hundreds Thousand Downloads after a Month Releasing
November 21, 2012, Beijing - along with the development of mobile device hardware, there were as lots of mobile CAD software on the market today. With the release of GstarCAD MC PRO for iOS and for Android last month, this Mobile CAD Client has attracted users all over the world with its features.
GstarCAD Attended CHIAC in Mexico
Beijing, China: November 21, 2012-Recently, CHIAC Mexico 2012 was held in Banamex exhibition center. As an international leading CAD products and solution provider, Gstarsoft attended this exhibition with the products of GstarCAD MC PRO, GstarCAD 2012, and GstarCAD Architecture 2012 and so on.
GstarCAD Showcased in CONSTRUIR RIO, Brazil
Rio de Janeiro, Brazil, Nov 7th - 10th, 2012 - Gstarsoft, one of the world leading providers of 2D/3D design software and its authorized distributor - Arkisoft successfully showed GstarCAD in the CONSTRUIR RIO held in Riocentro Convention Center.
Noam Chomsky on Where Artificial Intelligence Went Wrong
Lengthy Atlantic interview with linguist Noam Chomsky on the state of AI and the use of statistical models. The interview can be read here and a detailed overview and reply by Director of Research at Google, Peter Norvig is here.
ST Robotics Offers 11-Axis Tandem Robot System for under $20,000
ST Robotics announced today the latest addition to their R12 robot product line, the Tandem R125, a low cost two-armed robot system. Including the programmable carousel, ST Robotics' Tandem R125 robot has a total of 11 axes. The entire system is available for less than $20,000 and includes everything to get up and running: the two R12 five-axis robot arms mounted on the carousel, two K11R controllers, RoboForth II software, intuitive teach pad, simple interfacing with other equipment, cables, manuals, a two-year warranty and unlimited free technical support.
ST Robotics Offers 11-Axis Tandem Robot System for under $20,000
Tandem R125 features two 5-axis vertically articulated robot arms mounted to programmable carousel. Also included are 2 interconnected K11R robot controllers enabling communications to synchronize motions of both robots or allowing robots to alternate turns while performing one task. RoboForth II software, teach pad, equipment interfacing, and cables are included in industrial system.
Innorobo Announces Initial Lineup of Speakers for 2013 International Robotics Summit
Innorobo attracts top range leaders, pioneers and researchers with international prominence.
MMP RELEASES NEW 24V DC PLANETARY GEARMOTOR FOR ROBOTICS & AUTOMATION APPLICATONS
This is to announce our latest Product Innovation, the Model MMP D33-455D-24V GP81-029 DC Gearmotor.
The fully reversible Gearmotor operates with a 24V DC Input, while consuming just 14 A of current.
Adding to its versatility, the unit is designed with a rear shaft extension, and threaded mounting holes for an integrally mounted optical encoder.
This unique design features a High Efficiency Planetary Gearing, High Output Power to size & weight ratio, Low Speed and Low Noise, in a Compact, Lightweight (Just 11 Pounds!) 24 Volt DC Gearmotor.
Please find attached the Press Release, Technical Specification Sheet, and a Photograph of this exciting new "Built in the USA" product.
Typical uses for this "Compact, Lightweight" 24 Volt DC Gearmotor would include Mobility & Accessibility Equipment, Autonomous/Robotic Vehicles, UGV's, UUV's, Alternative Energy Equipment, including Solar Tracking, Linear Actuators, Automotive Accessories, Material Handling Equipment, Moving Target Equipment, Rotating Signage, and battery powered Electric Utility Vehicles of all kinds.
This unit is able to develop its full continuous output torque of 136 In Lbs. at 140 RPM, while consuming 28.6 Amps of current. That translates to a long life battery charge, quiet operation, and lower cost drive electronics, to mention just a few of the many benefits available to the user..
Pressure Sensor Market is Expected to Reach $7.34 Billion at a CAGR of 6.3% from 2012 to 2017 by MarketsandMarkets
Pressure Sensor market research report categorizes the global market on the basis of technologies, applications and geographical analysis; forecasting revenue and analyzing trends in the pressure sensor market.
FABTECH 2012 Confirms: Manufacturing is the Comeback Player of the Year
Record turnout and brisk sales show that manufacturing in the U.S. has a bright future.
Behlman's 94050 UAV Power Supply Proves that the Sky is no Limit for Powering Systems on Unmanned Aerial Vehicles
Behlman COTS Power-on-a-Card can be configured to meet the size, shape and power requirements of virtually any UAV.
U.S. Fish and Wildlife Service Purchases SkyFusion Pak System
SkyIMD, the innovators in aerial imaging and Intelligence, Surveillance and Reconnaissance (ISR) solutions, announces that it has been awarded a contract by the USFWS Office of Law Enforcement Aviation for its SkyFusion Pak 2000 aerial imaging system. Enforcement division extends capabilities with SkyIMD aerial imaging system.
Records 10846 to 10860 of 12288
First | Previous | Next | Last
Industrial Robotics - Featured Product
HONPINE - Robot Reducers and Gearboxes
HONPINE is the leading supplier of harmonic drive reducers,rv reducer gearboxes,planetary reducers,harmonic drive actuators. We provide precision motion control reducers and gearboxes since 2018. We highly value cooperation with our customers and are committed to providing precision transmission solutions.
Robotics and Automation - Featured Company
OnLogic
A global industrial PC manufacturer and solution provider focused on hardware for the IoT edge, OnLogic designs highly-configurable computers engineered for reliability. Their systems operate in the harshest environments and power innovation in the evolving Internet of Things. Founded in 2003 as Logic Supply, the company has served more than 70,000 customers. OnLogic has offices in the US, Netherlands, Taiwan and Malaysia.
