Technical Equipment Sales will now be a CNC machine tool dealer for the Muratec brand in Ohio, Indiana & Kentucky.
From ROS.org: Willow Garage is proud to announce the initial release of MoveIt! : new software targeted at allowing you to build advanced applications integrating motion planning, kinematics, collision checking with grasping, manipulation, navigation, perception, and control. MoveIt! is robot agnostic software that can be quickly set up with your robot if a URDF representation of the robot is available. The MoveIt! Setup Assistant lets you configure MoveIt! for any robot, allowing you to visualize and interact with the robot model quickly. MoveIt! can incorporate both actual sensor data and simulated models to build an environment representation. Sensor information (3D) can be automatically integrated realtime in the representation of the world that MoveIt! maintains. CAD models can also be imported in the same world representation if desired. Collision-free motion planning, execution and monitoring are core capabilities that MoveIt! provides for any robot. MoveIt! updates its representation of the environment on the fly, enabling reactive motion planning and execution, which is essential for applications in human-robot collaborative environments. MoveIt! interfaces with controllers through a standard ROS interface, allowing for ease of inter-operability, i.e. the ability to use the same higher-level software with a variety of robots without needing to change code. MoveIt! is architected to be flexible, using a plugin architecture to allow users to integrate their own custom components while still providing out-of-the-box functionality using default implementations. Furthermore, the ROS communication and configuration layer of MoveIt! is separated from core computational components such as motion planning or collision checking, the latter components being provided separately as C++ libraries. Available here .
With campus safety and security in mind, engineering students at The University of Alabama in Huntsville are working with the campus police department to perfect unmanned aerial vehicle (UAV) technologies for use on-campus.
This flight shatters their previous record of 26 hours and 2 minutes set in 2009 using the same vehicle, but with gaseous hydrogen stored at 5,000 pounds per square inch (psi).
Evana utilizes diverse technologies to specialize in motion control, robotics integration and system architecture by linking production equipment, material handling systems, data collection, networking, as well as computer software and hardware into flexible, unified technology.
NASA has selected Development Projects Inc. of Dayton, Ohio, to manage a new Centennial Challenge prize competition involving unmanned aircraft systems in 2014.
An Up-Close Look at New Innovations in Robotics, Software and Connection Technology:
Perfect solution to sorting, and pattern making, with variable infeed and the requirement for a stable out flow for post processes
Roboteq, Inc launched a kickstarter project named RIO (for Raspberry IO) and aimed at creating an intelligent I/O card that stacks over the $35 Raspberry PI Linux Single Board computer. Power for the PI from any DC source RIO includes a 3A DC/DC converter that may be connected to a 10V to 40V DC supply, and generates the 5V needed by the PI and the RIO cards. 21 I/O lines to Connect Just About Anything RIO provides a total of 8 digital outputs rated up to 1A and 30V max, which may also be used as digital inputs. The card includes 13 inputs, each of which can be configured as a digital input, 0-5V analog input with 12-bit resolution, or as a timer input. In the timer mode, the inputs can capture pulse width, frequency, quadrature encoder counts, or duty cycle. Most of the input pins can also be configured as PWM outputs for driving RC servos, or dimmable lights. Serial Connectivity and CAN Networking Two serial ports are present on the card. One is fully RS232 compliant with programmable baud rate up to 115200 bits/s for connection to motor controllers, scanners, PC or any other RS232 device. The second is RS485 compatible, enabling, among other things, DMX512 connectivity to light show equipement. Optionally, a 3rd serial port uses TTL levels for direct interface to non-buffered, non-inverted USARTs as these found on most microcontrollers, like the Arduino. A CAN bus interface is also present on the Rio card for connecting to CAN-compatible device, on a low cost twisted pair network at speeds up to 1Mbit/s. Full Kickstarter details here .
Precision Hawk, an unmanned aerial systems and remote sensing company, uses re-branding as an opportunity to launch new model of UAV platform.
Position sensors allow humanoid robot to move and respond like a child.
SmartMow robot lawn mower uses advanced navigation, cameras, and GPS.
QinetiQ North America delivers world-class technology and responsive solutions to government agencies and commercial customers for many of their most urgent and complex challenges.
Open Hardware DIY Kit and Workshops for Makers Bring 3D Printing to New Public
A robot can struggle to discover objects in its surroundings when it relies on computer vision alone. But by taking advantage of all of the information available to it - an object's location, size, shape and even whether it can be lifted - a robot can continually discover and refine its understanding of objects, say researchers at Carnegie Mellon University's Robotics Institute.
Records 5596 to 5610 of 7757
Industrial Robotics - Featured Product
KeMotion stands for the fast, open and customizable automation of robots and machines in the Industry 4.0 era. Thanks to the scalable hardware in combination with many high-performance technology functions and turnkey software packages, the optimum solution can be created quickly and easily.