Persimmon Technologies Receives Second National Science Foundation Grant for the Development of Highly Efficient Electric Motor Technology
New funding allows for expansion of technology to significantly improve performance and lower costs of electric motors
NEW SERVO DRIVES BOOST MACHINE THROUGHPUT AND LOWER COSTS
World debut at SPS/IPC/DRIVES , 27-29 November 2012, Nuremberg, booth 4-350
Rockwell Automation Awarded $21.7 Million Contract from U.S. Navy for Control Systems and Engineering Support Services
Rockwell Automation products and software have been installed successfully onboard various Navy and Coast Guard ships since 1997.
Northrop Grumman Selects Garmin® Integrated Flight Deck for New Optionally Piloted Aircraft
The Firebird is equipped with a tailored version of Garmin's latest touchscreen-controlled integrated flight deck system
NEW COST-EFFECTIVE, SELF-CLEANING CAMERA FILTER DEVELOPED FOR DIRTY, DUSTY ENVIRONMENTS
Created to address an unmanned vehicle need, innovative filter design maintains clear camera view while ground vehicle or surface vessel is in operation
QinetiQ North America's TALON® Robot Selected by Czech and Polish Militaries
World-renowned robot expands international presence into Central Europe
Intelligrated to showcase latest Alvey Robotics material handling solutions at Automate 2013
In-booth demonstration features robotic case packing, unpacking and palletizing capabilities
GstarCAD MC PRO: Over Hundreds Thousand Downloads after a Month Releasing
November 21, 2012, Beijing - along with the development of mobile device hardware, there were as lots of mobile CAD software on the market today. With the release of GstarCAD MC PRO for iOS and for Android last month, this Mobile CAD Client has attracted users all over the world with its features.
GstarCAD Attended CHIAC in Mexico
Beijing, China: November 21, 2012-Recently, CHIAC Mexico 2012 was held in Banamex exhibition center. As an international leading CAD products and solution provider, Gstarsoft attended this exhibition with the products of GstarCAD MC PRO, GstarCAD 2012, and GstarCAD Architecture 2012 and so on.
GstarCAD Showcased in CONSTRUIR RIO, Brazil
Rio de Janeiro, Brazil, Nov 7th - 10th, 2012 - Gstarsoft, one of the world leading providers of 2D/3D design software and its authorized distributor - Arkisoft successfully showed GstarCAD in the CONSTRUIR RIO held in Riocentro Convention Center.
ST Robotics Offers 11-Axis Tandem Robot System for under $20,000
Tandem R125 features two 5-axis vertically articulated robot arms mounted to programmable carousel. Also included are 2 interconnected K11R robot controllers enabling communications to synchronize motions of both robots or allowing robots to alternate turns while performing one task. RoboForth II software, teach pad, equipment interfacing, and cables are included in industrial system.
Innorobo Announces Initial Lineup of Speakers for 2013 International Robotics Summit
Innorobo attracts top range leaders, pioneers and researchers with international prominence.
MMP RELEASES NEW 24V DC PLANETARY GEARMOTOR FOR ROBOTICS & AUTOMATION APPLICATONS
This is to announce our latest Product Innovation, the Model MMP D33-455D-24V GP81-029 DC Gearmotor.
The fully reversible Gearmotor operates with a 24V DC Input, while consuming just 14 A of current.
Adding to its versatility, the unit is designed with a rear shaft extension, and threaded mounting holes for an integrally mounted optical encoder.
This unique design features a High Efficiency Planetary Gearing, High Output Power to size & weight ratio, Low Speed and Low Noise, in a Compact, Lightweight (Just 11 Pounds!) 24 Volt DC Gearmotor.
Please find attached the Press Release, Technical Specification Sheet, and a Photograph of this exciting new "Built in the USA" product.
Typical uses for this "Compact, Lightweight" 24 Volt DC Gearmotor would include Mobility & Accessibility Equipment, Autonomous/Robotic Vehicles, UGV's, UUV's, Alternative Energy Equipment, including Solar Tracking, Linear Actuators, Automotive Accessories, Material Handling Equipment, Moving Target Equipment, Rotating Signage, and battery powered Electric Utility Vehicles of all kinds.
This unit is able to develop its full continuous output torque of 136 In Lbs. at 140 RPM, while consuming 28.6 Amps of current. That translates to a long life battery charge, quiet operation, and lower cost drive electronics, to mention just a few of the many benefits available to the user..
Pressure Sensor Market is Expected to Reach $7.34 Billion at a CAGR of 6.3% from 2012 to 2017 by MarketsandMarkets
Pressure Sensor market research report categorizes the global market on the basis of technologies, applications and geographical analysis; forecasting revenue and analyzing trends in the pressure sensor market.
FABTECH 2012 Confirms: Manufacturing is the Comeback Player of the Year
Record turnout and brisk sales show that manufacturing in the U.S. has a bright future.
Records 8161 to 8175 of 9379
First | Previous | Next | Last
Industrial Robotics - Featured Product
REIKU's Cable Saver™ - The Most Versatile Modular Robotic Cable Management Solution
REIKU's Cable Saver™ Solution eliminates downtime, loss of revenue, expensive cable and hose replacement costs, maintenance labor costs. It's available in three sizes 36, 52 and 70 mm.
All of the robots cables and hoses are protected when routed through the Cable Saver™ corrugated tubing.The Cable Saver™ uses a spring retraction system housed inside the Energy Tube™ to keep this service loop out of harms way in safe location at the rear of the Robot when not required. The Cable Saver™ is a COMPLETE solution for any make or model of robot. It installs quickly-on either side of the robot and has been tested to resist over 15 million repetitive cycles.
REIKU is committed to providing the most modular, effective options for ensuring your robotic components operate without downtime due to cable management.
www.CableSaver.com
