Midwest Motion Products - MMP BL86-425E-36V GP81-007
Brushless 36V DC Gearmotor capable of producing up to 51 in-lbs continuous torque and 140 in-lbs peak torque with an output speed of 650 RPM
Midwest Motion Products
Model Number: MMP BL86-425E-36V GP81-007
Description:
• Brushless 36V DC Gearmotor capable of producing up to 51 in-lbs continuous torque and 140 in-lbs peak torque with an output speed of 650 RPM.
• IP54 protected and under 3.5'' diameter and under 9.0'' total length and weight is 8.1 lbs.
• Contact us to get the datasheet to this model.
• Encoder-Compatible, Brake-Compatible or both rear shaft designs available.
• Samples readily available - can be built from Stock Materials, usually within just a day or two!
• Short Production Lead-times - weeks, not months!
Midwest Motion Products, Inc.
• Reputable, Minnesota USA based Corporation - Serving the Motion Control Industry since 2001.
• 8,000 Released DC Gearmotor Designs and 2,000,000 Individual Part Numbers.
• Lightning-Fast Delivery of Prototype Samples.
• High Volume Capacity - Annual Production Capacity 50,000+ Units.
• On-Time Production Delivery Rate is > 96%
• Incremental (Monthly or Quarterly) deliveries on Annual Blanket Orders.
• Excellent Tech Support - many decades of collective Industry-Specific experience on Staff.
• Facility built in 2014 and expansion added in 2019.
• Rapid Prototyping Services to help Design and Engineer Ideas into Reality.
Featured Product
US Digital's New L2 Low Profile Motor Encoder
The L2 incremental encoder uses US Digital's proven EM1 optical encoder module and disk, which has billions of device-hours of dependable service in customer applications. This product continues US Digital's strong reputation for reliable, field-tested encoders. The L2 is US Digital's lowest height encoder that uses the EM1 module. It has a 0.75 in. bolt-spacing mount. The maximum resolution is 1250 CPR (5000 PPR with quadrature). The L2 comes with a single-ended output. Another benefit of the L2 incremental encoder is its fast installation. The cover snaps onto the base to secure the module. It is designed for use with a high-retention connector or cable (sold separately). Like all US Digital products, the L2 is designed and manufactured in Vancouver, Washington, USA. It is backed by prompt access to our technical and customer service teams with same-day shipping on most orders.
