RobotWorx Partners with In-House Solutions Inc.
Robot integrator RobotWorx and Robotmaster software distributor In-House Solutions Inc. are working together to provide customers with the best solutions to challenging applications.
Servos, Motors, and Actuators Driving Robotic Components Market Towards a Healthy $2.4 Billion in 2016, According to ABI Research
Servos, motors, and actuators will show significantly higher growth rates than the overall robot market, due to the increasing complexity of robots. ABI Research forecasts robotic component revenues to exceed $2.36 billion in 2016, in a total robotics market of some $22 billion.
New Programmable Rotary Position Sensors
Novotechnik U.S. introduces the Vert-X 22E Series of programmable touchless rotary sensors. These sensors use a magnetic pick up that is secured to the rotating object, so that there is no direct mechanical linkage between the shaft and the measuring system, and therefore no wear.
Proximity Probe with Rear and Side View Target Protection
Condition monitoring specialists SENSONICS have added a new option to their established range of proximity probes which virtually eliminates the detrimental effects on measurements caused by both side and rear targets. The PRSVBeam proximity probe has an innovative tip design which overcomes the problems associated with traditional probe designs, such as poor accuracy, system non-linearities and extended set-up time.
A Multi Axis Motor Control EPOS2 36/2 Motherboard
Operating as standalone controller or integrated into final product as sub-board, EPOS2 36/2 Motherboard features snap-apart construction with 11 nodes connected via CAN-Open, allowing multi-axis customization on single board. Two digital inputs and 1 digital output are mapped on board with additional I/O expansion module as option. In addition to motor speed, torque, and position control, EPOS2 36/2 is capable of synchronously running coordinated multi-axis path dictated by interpolating points.
Multi-Axis Joint Modules suit lightweight applications.
Igus' "robolink" successfully tested in 100 beta applications
Hansen Medical Receives CE Mark for Its Magellan(TM) Robotic System for Peripheral Vascular Interventions
Company to Commence Initial Launch in Europe
Microscan Introduces Three New Machine Vision Innovations
Microscan introduces the AutoVISION™ family of machine vision products. The product line includes the Vision HAWK and Vision MINI smart cameras, as well as the new AutoVISION™ machine vision software interface.
Freescale Adds Controller and Peripheral Modules and Full Kits to Tower System Development Platform
Fifteen additions to modular tool lineup, including modules featuring Kinetis and ColdFire+ microcontrollers, support rapid prototyping and help reduce time to market
MossRehab First in the U.S. to Offer Therapeutic Use of ReWalk Device
In a groundbreaking move, MossRehab, one of the nations leading rehabilitation centers, will be the first facility in the country to offer ReWalk™ - I, an institutional version of ReWalk™, the only motorized exoskeleton that is approved by the FDA to be used in a rehabilitation setting under the supervision of healthcare professionals.
AMREL Robotic Interoperability Breakthrough
AMREL recently demonstrated an important breakthrough in interoperability for unmanned systems.
DELTA TAU: POWER PMAC - Motion Control Innovation
Controlling the Advanced Technology Solar Telescope
iRobot and InTouch Health Announce Agreement To Explore Potential Opportunities in Healthcare Market
iRobot Corp. and InTouch Health, announced the signing of a joint development and licensing agreement to explore potential opportunities for healthcare applications.
Energid Technologies assists Mitsubishi Heavy Industries in development of next-generation robot for nuclear power plant heat exchanger tube inspection
Robotic Hardware Integration Test Successfully Completed
A New Cast of Makers Will Converge on The Henry Ford for Maker Faire Detroit 2011, July 30-31
On July 30 and 31, The Henry Ford in Dearborn, Michigan will be the place to visit when Maker Faire Detroit returns to Henry Ford Museum for two days of unconventional imagination and stunning ingenuity.
Records 11521 to 11535 of 11601
First | Previous | Next | Last
Featured Product
ST Robotics Develops the Workspace Sentry for Collaborative Robotics
The ST Robotics Workspace Sentry robot and area safety system are based on a small module that sends an infrared beam across the workspace. If the user puts his hand (or any other object) in the workspace, the robot stops using programmable emergency deceleration. Each module has three beams at different angles and the distance a beam reaches is adjustable. Two or more modules can be daisy chained to watch a wider area. "A robot that is tuned to stop on impact may not be safe. Robots where the trip torque can be set at low thresholds are too slow for any practical industrial application. The best system is where the work area has proximity detectors so the robot stops before impact and that is the approach ST Robotics has taken," states President and CEO of ST Robotics David Sands.
