Bodkin Design Unveils Unique Snapshot Hyperspectral Products Through Exclusive Partnership With Cubert
Bodkin Design and Engineering, LLC will team with Cubert Gmbh at Photonics West 2017 for a presentation and product demo to showcase their patented snapshot spectral imaging for precision agriculture, medical and biotech, machine vision, and more.
Gobot Makes Internet of Things Development Both Easy And Powerful
Open Source Robotics and IoT Framework Releases Version 1.0
Result of the 2016 TraceParts annual competition
TraceParts challenged its engineering community to take part in a mystery word competition
LiDAR 101: A Q&A with a Pictometry Expert
Because LiDAR uses light, the target must be visible, so it is not an all-weather solution. It wont work well in fog or other weather conditions that affect visibility, but if conditions are clear, it can operate during both day and night.
An Open Source Driving Agent from comma.ai
From comma.ai: Last week, we open sourced an advanced driver assistance system in order to help accelerate the future of self driving cars and provide a platform anyone can build on top of. We released both openpilot, driving agent research software, and NEO, a robotics platform capable of running openpilot, under the MIT license.
openpilot is an open source adaptive cruise control and lane keeping assist system, both safety features available on modern cars. We would like to build the best ones on the market, and help you retrofit them to existing cars.
NEO is an open source robotics research platform. It is centered around an Android phone, similar to Android Based Robots. The modern smartphone is an incredible platform packed with sensors and processing power. NEO also includes a cooling solution and a CAN interface board. CAN is a networking protocol used in cars, trucks, power wheelchairs, golf carts, and many other robotics applications.
With a forthcoming openpilot release, it will become easier for researchers to add support for their own vehicle. On older cars, some actuators may be harder to control than others, but it should be very possible to control the gas electronically to have a gas only adaptive cruise control. It's also possible for researchers to add mechanical actuators for the controls that cannot be electronically actuated.
Have fun, be safe, and let's usher in the future of self driving cars together... (Github repo)(Interview)
Final Dates Set for Major International Robotics Challenge in the United Arab Emirates
The contest will inevitably take up a large area of the circuit since it will consist of three challenges and a triathlon type Grand Challenge. Challenge 1 will require teams to use an Unmanned Aerial Vehicle (UAV) to locate, track and land on a moving vehicle. This means that the UAV must be capable of locating the moving vehicle, navigating the path and speed of the vehicle and land on the target location while the vehicle is in motion.
Optelos Launches Turnkey Solution for Drone Workflow, Solving Key Challenges Holding Back Drone Rrograms
Optelos turnkey approach is setting the standard for securely managing drone work activities and data content.
AutonomouStuff and NEXCOM Pave the "Road to Autonomy"
CES 2017 in Las Vegas Brings AutonmouStuff and NEXCOM Together to Innovate Automated Driving Solutions
Future Drones Will Fly as Silent as Owls, as Steady as Bees
Glenn McDonald for Seeker: Want to know what drones of the future will look like?
So does David Lentink, editor of Interface Focus, a journal that, as its title suggests, looks at the interface of different scientific disciplines. Each issue zeroes in on a particular intersection of physical sciences and life sciences and invites the world's top scholars to publish their latest work.
The latest issue of Interface Focus brings together biologists and engineers to discuss a topic that's relatively straightforward and, well, pretty empirically cool:
"It's completely focused on how animals fly and how that can help us build flying robots," said Lentink, assistant professor of mechanical engineering at Stanford. Can't argue with that.
The new issue features 18 newly published papers on various ways that engineers are borrowing ideas from nature to make the next generation of drones and aerial robots. Several of the papers detail prototype drones that have already been built and tested. Cont'd...
DIY Position Tracking Using HTC Vive's Lighthouse
From Alexander Shtuchkin:
Code & schematics for position tracking sensor using HTC Vive's Lighthouse system and a Teensy board.
General purpose indoor positioning sensor, good for robots, drones, etc.
3d position accuracy: currently ~10mm; less than 2mm possible with additional work.
Update frequency: 30 Hz
Output formats: Text; Mavlink ATT_POS_MOCAP via serial; Ublox GPS emulation (in works)
HTC Vive Station visibility requirements: full top hemisphere from sensor. Both stations need to be visible.
Positioning volume: same as HTC Vive, approx up to 4x4x3 meters.
Cost: ~$10 + Teensy 3.2 ($20) (+ Lighthouse stations (2x $135))
Skills to build: Low complexity soldering; Embedded C++ recommended for integration to your project.
(Github page)
Was That an Insect or a Drone?
The insect drone takes on the functions of larger UAVs, but reduces the larger drones down into a miniature undetectable device.
PrecisionHawk Research Outlines Operations Risk for Drones Flying Beyond Line of Sight
Under the FAA Pathfinder Program, PrecisionHawk's Phase 2 research indicates technology assist is critical for BVLOS operations.
Sentera Partners With RDO Equipment Co. to Offer New UAV Solutions
Agreement brings additional, complete UAV solution packages to RDO Equipment Co. Customers
Engineers Devise New Method to Heighten Senses of Soft Robot
Written by AZoRobotics: Most robots achieve grasping and tactile sensing through motorized means, which can be excessively bulky and rigid. A Cornell group has devised a way for a soft robot to feel its surroundings internally, in much the same way humans do.
A group led by Robert Shepherd, assistant professor of mechanical and aerospace engineering and principal investigator of Organic Robotics Lab, has published a paper describing how stretchable optical waveguides act as curvature, elongation and force sensors in a soft robotic hand.
Doctoral student Huichan Zhao is lead author of “Optoelectronically Innervated Soft Prosthetic Hand via Stretchable Optical Waveguides,” which is featured in the debut edition of Science Robotics. The paper published Dec. 6; also contributing were doctoral students Kevin O’Brien and Shuo Li, both of Shepherd’s lab. Cont'd...
Autopilot vs. Autonomous
A fully autonomous automobile is able to decide whether it can safely enter an intersection. It is able to decide how to maneuver around other vehicles, people, and other moving objects.
Records 4801 to 4815 of 7296
First | Previous | Next | Last
Featured Product
New incremental encoder IERF3 L from FAULHABER
FAULHABER is expanding its product range with the ultra-precise incremental encoder IERF3 L. Thanks to the optical measuring principle and state-of-the-art chip technology, the device offers the highest resolution, excellent repeatability, and outstanding signal quality. In typical applications, the positioning accuracy is 0.1° and the repeatability 0.007°. This makes the encoder the perfect solution for high-precision positioning applications in confined spaces.
Robotics and Automation - Featured Company
TM Robotics (Americas) Inc
TM Robotics, in partnership with Shibaura Machine, formerly known as Toshiba Machine until 1st April 2020, offers a comprehensive range of industrial robots ideally suited for high-precision assembly, machine loading/unloading and material-handling applications that can be dust proof, clean room, or IP65/67. The company's extensive product line starts with a Cartesian solution available in thousands of combinations from single actuators to four-axis solutions; six-axis solutions that can include precise vision-control; and a complete range of SCARAs from low cost to the industry-leading SCARA with 1200-mm reach that can carry up to 20 kgs. TM Robotics sells and services robots throughout Europe, the Middle East, India, Russia, and Africa, as well as North, Central, and South America, from headquarters in Hertfordshire, England and Elk Grove Village, IL, USA. For more information, visit www.tmrobotics.com or follow us on Twitter, LinkedIn and YouTube.
