Rockwell Automation Awarded $21.7 Million Contract from U.S. Navy for Control Systems and Engineering Support Services
Rockwell Automation products and software have been installed successfully onboard various Navy and Coast Guard ships since 1997.
Northrop Grumman Selects Garmin® Integrated Flight Deck for New Optionally Piloted Aircraft
The Firebird is equipped with a tailored version of Garmin's latest touchscreen-controlled integrated flight deck system
NEW COST-EFFECTIVE, SELF-CLEANING CAMERA FILTER DEVELOPED FOR DIRTY, DUSTY ENVIRONMENTS
Created to address an unmanned vehicle need, innovative filter design maintains clear camera view while ground vehicle or surface vessel is in operation
QinetiQ North America's TALON® Robot Selected by Czech and Polish Militaries
World-renowned robot expands international presence into Central Europe
Intelligrated to showcase latest Alvey Robotics material handling solutions at Automate 2013
In-booth demonstration features robotic case packing, unpacking and palletizing capabilities
GstarCAD MC PRO: Over Hundreds Thousand Downloads after a Month Releasing
November 21, 2012, Beijing - along with the development of mobile device hardware, there were as lots of mobile CAD software on the market today. With the release of GstarCAD MC PRO for iOS and for Android last month, this Mobile CAD Client has attracted users all over the world with its features.
GstarCAD Attended CHIAC in Mexico
Beijing, China: November 21, 2012-Recently, CHIAC Mexico 2012 was held in Banamex exhibition center. As an international leading CAD products and solution provider, Gstarsoft attended this exhibition with the products of GstarCAD MC PRO, GstarCAD 2012, and GstarCAD Architecture 2012 and so on.
GstarCAD Showcased in CONSTRUIR RIO, Brazil
Rio de Janeiro, Brazil, Nov 7th - 10th, 2012 - Gstarsoft, one of the world leading providers of 2D/3D design software and its authorized distributor - Arkisoft successfully showed GstarCAD in the CONSTRUIR RIO held in Riocentro Convention Center.
ST Robotics Offers 11-Axis Tandem Robot System for under $20,000
Tandem R125 features two 5-axis vertically articulated robot arms mounted to programmable carousel. Also included are 2 interconnected K11R robot controllers enabling communications to synchronize motions of both robots or allowing robots to alternate turns while performing one task. RoboForth II software, teach pad, equipment interfacing, and cables are included in industrial system.
Innorobo Announces Initial Lineup of Speakers for 2013 International Robotics Summit
Innorobo attracts top range leaders, pioneers and researchers with international prominence.
MMP RELEASES NEW 24V DC PLANETARY GEARMOTOR FOR ROBOTICS & AUTOMATION APPLICATONS
This is to announce our latest Product Innovation, the Model MMP D33-455D-24V GP81-029 DC Gearmotor.
The fully reversible Gearmotor operates with a 24V DC Input, while consuming just 14 A of current.
Adding to its versatility, the unit is designed with a rear shaft extension, and threaded mounting holes for an integrally mounted optical encoder.
This unique design features a High Efficiency Planetary Gearing, High Output Power to size & weight ratio, Low Speed and Low Noise, in a Compact, Lightweight (Just 11 Pounds!) 24 Volt DC Gearmotor.
Please find attached the Press Release, Technical Specification Sheet, and a Photograph of this exciting new "Built in the USA" product.
Typical uses for this "Compact, Lightweight" 24 Volt DC Gearmotor would include Mobility & Accessibility Equipment, Autonomous/Robotic Vehicles, UGV's, UUV's, Alternative Energy Equipment, including Solar Tracking, Linear Actuators, Automotive Accessories, Material Handling Equipment, Moving Target Equipment, Rotating Signage, and battery powered Electric Utility Vehicles of all kinds.
This unit is able to develop its full continuous output torque of 136 In Lbs. at 140 RPM, while consuming 28.6 Amps of current. That translates to a long life battery charge, quiet operation, and lower cost drive electronics, to mention just a few of the many benefits available to the user..
Pressure Sensor Market is Expected to Reach $7.34 Billion at a CAGR of 6.3% from 2012 to 2017 by MarketsandMarkets
Pressure Sensor market research report categorizes the global market on the basis of technologies, applications and geographical analysis; forecasting revenue and analyzing trends in the pressure sensor market.
FABTECH 2012 Confirms: Manufacturing is the Comeback Player of the Year
Record turnout and brisk sales show that manufacturing in the U.S. has a bright future.
Behlman's 94050 UAV Power Supply Proves that the Sky is no Limit for Powering Systems on Unmanned Aerial Vehicles
Behlman COTS Power-on-a-Card can be configured to meet the size, shape and power requirements of virtually any UAV.
U.S. Fish and Wildlife Service Purchases SkyFusion Pak System
SkyIMD, the innovators in aerial imaging and Intelligence, Surveillance and Reconnaissance (ISR) solutions, announces that it has been awarded a contract by the USFWS Office of Law Enforcement Aviation for its SkyFusion Pak 2000 aerial imaging system. Enforcement division extends capabilities with SkyIMD aerial imaging system.
Records 14641 to 14655 of 15861
First | Previous | Next | Last
Featured Product
Piab's Kenos KCS Gripper
Piab's Kenos KCS gripper enables a collaborative robot to handle just about anything at any time. Combining Piab's proprietary air-driven COAX vacuum technology with an easily replaceable technical foam that molds itself around any surface or shape, the gripper can be used to safely grip, lift and handle any object. Standard interface (ISO) adapters enable the whole unit to be attached to any cobot type on the market with a body made in a lightweight 3D printed material. Approved by Universal Robots as a UR+ end effector.
