New Robot Lends Precision And Reliability To The Production Of Hearing Aids
Hearing device manufacturer Oticon needed a more flexible robot to handle the tiny hearing device components in its production. The company found the ideal solution in the six-axis robot from Danish company Universal Robots.
Extending USB 3.0 Over Fiber For Machine Vision Applications
ExtremeUSB technology based extenders for USB 3.0 are fiber based and certified with USB3 Vision cameras, thus offering systems integrators a reliable solution when vision applications need to be extended beyond 3 meters.
Aerospace Automation
Even though robots are known as repeatable and not precise, many tools can be used to obtain robust and precise results such as force feedback components, vision systems, laser sensors, probing, active compliance, adaptive machining, closed-loop machining, Leica calibration, etc.
A New Class of Rogowski Coil Split-core Current Transducers
Until now Rogowski coils have delivered at best a 2% positioning error. With this improvement, the error due to the positioning of the conductor is specified at a maximum of 0.65% of the measured value for a 15mm diameter conductor irrespective of where it is positioned, even if it is adjacent to the coil clasp.
FAMU/FSU College of Engineering's Entry to 2013 RASC-AL Competition
RASC-AL Exploration Robo-Ops Competition (i.e., Robo-Ops) is an engineering competition sponsored by NASA and organized by the National Institute of Aerospace. In this exciting competition, undergraduate and graduate students are invited to create a multi-disciplinary team to build a planetary rover prototype and demonstrate its capabilities to perform a series of competitive tasks in field tests at the NASA Johnson Space Centers Rock Yard in June 2013.
The RoboUtes' Entry to 2013 RASC-AL Competition
RASC-AL Exploration Robo-Ops Competition (i.e., Robo-Ops) is an engineering competition sponsored by NASA and organized by the National Institute of Aerospace. In this exciting competition, undergraduate and graduate students are invited to create a multi-disciplinary team to build a planetary rover prototype and demonstrate its capabilities to perform a series of competitive tasks in field tests at the NASA Johnson Space Centers Rock Yard in June 2013.
University of Nebraska-Lincoln's Entry to 2013 RASC-AL Competition
RASC-AL Exploration Robo-Ops Competition (i.e., Robo-Ops) is an engineering competition sponsored by NASA and organized by the National Institute of Aerospace. In this exciting competition, undergraduate and graduate students are invited to create a multi-disciplinary team to build a planetary rover prototype and demonstrate its capabilities to perform a series of competitive tasks in field tests at the NASA Johnson Space Centers Rock Yard in June 2013.
Salamandra Robotica 2
Salamandra robotica II walking and swimming outdoors and performing the transition from swimming to walking indoors.
Bebionic3 Myoelectric Hand In Action
The new bebionic3 myoelectric hand, which is made from aluminium and alloy knuckles, moves like a real human limb by responding to Nigel's muscle twitches. Incredibly, the robotic arm is so sensitive it means the father-of-one can touch type on a computer keyboard, peel vegetables, and even dress himself for the first time in six years.
Low Cost Hobbyists FPGA Kickstarter
If you have been thinking of dipping your toe into the world of FPGAs (field-programmable gate arrays) but always thought they were too expensive for hobbyist then you might want to check out the 'Mojo FPGA' on Kickstarter.
The Mojo is designed to make digital design easy and cost effective for anyone who is just getting started. FPGAs do not retain their configuration when the power is lost, so they must be reconfigured every time the board is turned on. Typically, a PROM is used to load the configuration file (also known as bit file) into the FPGA automatically. The problem with that is you generally need a fairly expensive programmer to program the PROMs. The Mojo features a basic serial port (similar to an Arduino) that can be used to program a new bit file into on-board flash memory. When the board is powered on, a microcontroller reads the flash memory and configures the FPGA automatically. All that is required is a low-cost USB to serial converter.
The original Kickstarter goal was 7,000 but they blew through that goal and are currently at 70,000. If you pledge $65 dollars you get a fully assembled board.
Case Study: Robot for tool production company with 10 employees
The acquisition cost for the entire system including imaging will have paid itself off in only 10 months with single shifts. If the robot is used for 2 shifts, it will actually have paid itself off in only seven months.
Robotics In Law Enforcement
Soon, the police wont have to draw their guns. They will be able to just push buttons and move joysticks to capture the bad guys.
Case Study: Kawasaki Robotics Upgrade Project Proves Successful
The Kawasaki Robotics project on the existing robotics paint system consisted of upgrading two Kawasaki robots and replacing four Kobelco robots with new Kawasaki robots.
Measurable Energy Savings in Die Casting Automation
Experience shows that it is not the robots that are the biggest energy consumers, but the entire peripheral equipment.
The Kinetic Sculptures Of Bjorn Schulke
The Pratt Institutes' Manhattan Gallery is currently running an art exhibit entitled "KINESTHETICS: ART IMITATING LIFE". The show runs till the end of April and features cool drones created by artists is Bjorn Schulke. His personal website also has some really cool works from previous exhibits.
Records 3391 to 3405 of 3695
First | Previous | Next | Last
Featured Product
3D Vision: Ensenso B now also available as a mono version!
This compact 3D camera series combines a very short working distance, a large field of view and a high depth of field - perfect for bin picking applications. With its ability to capture multiple objects over a large area, it can help robots empty containers more efficiently. Now available from IDS Imaging Development Systems. In the color version of the Ensenso B, the stereo system is equipped with two RGB image sensors. This saves additional sensors and reduces installation space and hardware costs. Now, you can also choose your model to be equipped with two 5 MP mono sensors, achieving impressively high spatial precision. With enhanced sharpness and accuracy, you can tackle applications where absolute precision is essential. The great strength of the Ensenso B lies in the very precise detection of objects at close range. It offers a wide field of view and an impressively high depth of field. This means that the area in which an object is in focus is unusually large. At a distance of 30 centimetres between the camera and the object, the Z-accuracy is approx. 0.1 millimetres. The maximum working distance is 2 meters. This 3D camera series complies with protection class IP65/67 and is ideal for use in industrial environments.
Robotics and Automation - Featured Company
Onward Robotics
Onward Robotics delivers innovative automation technology that coordinates humans and robots as a cohesive system to revolutionize fulfillment. Our Meet Me® solution combines proprietary software with person-to-goods mobile robots to increase efficiency in warehousing, distribution, and e-commerce operations. Onward Robotics provides the boost in productivity, flexibility, and speed that companies need to remain competitive and grow.
