IDC Forecasts Worldwide Spending on Robotics to Reach $135 Billion in 2019 Driven by Strong Spending Growth in Manufacturing and Healthcare
The new spending guide measures purchases of robotic systems, system hardware, software, robotics-related services, and after-market robotics hardware on a regional level across thirteen key industries and fifty-two use cases.
VEX Robotics by HEXBUG Kit Named Educational Toy of the Year
The VEX Robotic Arm by HEXBUG received the award for Educational Toy of the Year at the Toy Industry Association's 16th annual Toy of the Year (TOTY) Awards, also known as the "Oscars" of the toy industry. This distinguished honor is granted annually to a toy that best enables learning through play. Receiving the 2016 Educational TOTY further cements HEXBUG and VEX Robotics as continued world leaders in innovative toys and robotics.
ROS Navigation Basics
If youve worked with ROS and robotics, youve probably heard of gmaping, localization, SLAM, costmaps and paths, but what does all this mean? They are more than just robot buzz words - these allow a robot to get from one point to another without bumping into obstacles, and in this tutorial, well be covering some of the key concepts in what makes up an autonomous robot.
SME Announces Smart Manufacturing Seminar Series to Educate and Showcase Advanced Manufacturing Technologies
Topic of additive manufacturing/3D printing session kicks off series March 16 in Detroit
Republican-Leaning Cities Are At Greater Risk Of Job Automation
By Jed Kolko for Five Thirty Eight: More and more work activities and even entire jobs are at risk of beingautomated by algorithms, computers and robots, raising concerns that more and more humans will be put out of work. The fear of automation is widespread — President Obama cited it as the No. 1 reason Americans feel anxious about the economy in his State of the Union address last month — but its effects are not equally distributed, creating challenges for workers and policymakers. An analysis of where jobs are most likely to face automation shows that areas that voted Republican in the last presidential election are more at risk, suggesting that automation could become a partisan issue.
So-called “routine” jobs — those that “can be accomplished by following explicit rules” — are most at risk of automation. These include both “manual” routine occupations, such as metalworkers and truck drivers, and “cognitive” routine occupations, such as cashiers and customer service reps.1 Whereas many routine jobs tend to be middle-wage, non-routine jobs include both higher-wage managerial and professional occupations and lower-wage service jobs. Cont'd...
Japanese Firm To Open World's First Robot-run Farm
Spread , a vegetable producer, said industrial robots would carry out all but one of the tasks needed to grow the tens of thousands of lettuces it produces each day at its vast indoor farm in Kameoka, Kyoto prefecture, starting from mid-2017.
The robots will do everything from re-planting young seedlings to watering, trimming and harvesting crops.
The innovation will boost production from 21,000 lettuces a day to 50,000 a day, the firm said, adding that it planned to raise that figure to half a million lettuces daily within five years.
“The seeds will still be planted by humans, but every other step, from the transplanting of young seedlings to larger spaces as they grow to harvesting the lettuces, will be done automatically,” said JJ Price, Spread’s global marketing manager.
The new farm – an extension of its existing Kameoka farm – will improve efficiency and reduce labour costs by about half. The use of LED lighting means energy costs will be slashed by almost a third, and about 98% of the water needed to grow the crops will be recycled.
The farm, measuring about 4,400 sq metres, will have floor-to-ceiling shelves where the produce is grown... ( cont'd )
National Robotics Week Looks to Host More Events, Robot Enthusiasts and STEM Educators than Ever Before
Help Promote the Importance of Technology Education this April
KUKA Small Robot Receives Renowned Awards for Product Design
Fivefold triumph for the KUKA small robot: with the American Good Design Award, the KR AGILUS adds another trophy for excellent product design to its collection.
Navitar Enters into Definitive Agreement to Acquire Hyperion Development
Navitar, Inc, a leading USA-based manufacturer of precision optics and imaging system components, has signed a definitive agreement to acquire Hyperion Development, LLC, a leading design firm and manufacturer of custom optical assemblies and OEM solutions. The companies expect the deal to close by the end of the first quarter.
Global Motion Control Shipments Contract 3.9% in 2015
Global shipments for motion control products declined by 3.9% to $2.9 billion in 2015, according to new statistics released by the Motion Control & Motor Association (MCMA), the industrys trade group.
Locus Robotics Named Top Robotics Company to Watch in 2016
Robotics Business Review unveils its fifth annual RBR50 List
Schunk - Pneumatically Powered Universal Gripper PGN-Plus-P
SCHUNK has introduced several improvements on the original PGN-Plus and has announced the newest generation gripper, PGN-Plus-P. Enlarged supporting dimensions between the six load-bearing shoulders of the multi-tooth guidance allow higher moment capacity which can accommodated longer fingers and greater loads.
AUTOMATICA 2016: INNOVATIONS IN MACHINE VISION
VISION: THE EYE OF AUTOMATION
Asia: Robots, Automation & the Xi Jingping-effect
Please join newly launched Asian Robotics Review as it chronicles the greatest technological transformation in history: The Asian Century.
Automation Networks ANC-100e, Ethernet/IP to Allen-Bradley Data Highway Plus (DH+) Converter. $1,295 USD List.
Automation Networks is a Technology company providing a wide variety of quality Industrial Networking products for the most popular Ethernet & Fieldbus Industrial Networks. These include Allen-Bradley Ethernet CSP , Ethernet/IP, DeviceNet, Data Highway Plus (DH+); Siemens Profibus & Profinet; Schneider Electric Modbus RTU & Modbus TCP/IP. Other Industrial protocols & Networks includes CC-Link, BACnet MS/TP, BACnet/IP & MELSEC.
Records 5716 to 5730 of 11341
First | Previous | Next | Last
Industrial Robotics - Featured Product
Destaco's PNEUMATIC PARALLEL GRIPPERS - RTH & RDH
Destaco's Robohand RDH/RTH Series 2 and 3 jaw parallel grippers have a shielded design that deflects chips and other particulate for a more reliable, repeatable operation in part gripping applications ranging from the small and lightweight, to the large and heavy. RDH Series of Rugged, Multi-Purpose Parallel Grippers for Heavy Parts - Designed for high particulate application environments, automotive engine block, gantry systems, and ideal for heavy part gripping The series includes eight sizes for small lightweight to large/heavy part gripping. RTH Series of Powerful, Multi-Purpose Parallel Grippers for Heavy Parts - Designed for large round shaped parts, automotive engine block and gantry systems, and heavy part gripping. They're available in eight sizes for small lightweight to large and heavy part gripping.
