Liquid Robotics Closes on $45M Series E
Liquid Robotics is a maker of autonomous ocean robots and ocean data services.
DARPA Seeks More Robust Military Wireless Networks
Wireless Network Defense program seeks to develop new technologies to help make wireless networks more resilient to unforeseen scenarios and malicious compromise
Intelligrated acquires Datria, a provider of innovative voice-enabled software solutions
Acquisition supports the increasing need for real-time, mobile-enabled distribution and fulfillment operations
New ElectroCraft AxialPower Plus and L3 Linear Actuators
Try the L3 linear actuators with applications needing a little more force.
GstarCAD MC Received Complimentary Reviews among Overseas Users
As a mobile CAD program of the new age, GstarCAD MC is becoming the milestone of overseas marketing which GstarCAD was expecting by users. GstarCAD received high acclaim since it accessed overseas market, and the downloads were at records high.
Low Cost Hobbyists FPGA Kickstarter
If you have been thinking of dipping your toe into the world of FPGAs (field-programmable gate arrays) but always thought they were too expensive for hobbyist then you might want to check out the 'Mojo FPGA' on Kickstarter .
The Mojo is designed to make digital design easy and cost effective for anyone who is just getting started. FPGAs do not retain their configuration when the power is lost, so they must be reconfigured every time the board is turned on. Typically, a PROM is used to load the configuration file (also known as bit file) into the FPGA automatically. The problem with that is you generally need a fairly expensive programmer to program the PROMs. The Mojo features a basic serial port (similar to an Arduino) that can be used to program a new bit file into on-board flash memory. When the board is powered on, a microcontroller reads the flash memory and configures the FPGA automatically. All that is required is a low-cost USB to serial converter.
The original Kickstarter goal was 7,000 but they blew through that goal and are currently at 70,000. If you pledge $65 dollars you get a fully assembled board.
Case Study: Robot for tool production company with 10 employees
The acquisition cost for the entire system including imaging will have paid itself off in only 10 months with single shifts. If the robot is used for 2 shifts, it will actually have paid itself off in only seven months.
Robotics In Law Enforcement
Soon, the police wont have to draw their guns. They will be able to just push buttons and move joysticks to capture the bad guys.
Case Study: Kawasaki Robotics Upgrade Project Proves Successful
The Kawasaki Robotics project on the existing robotics paint system consisted of upgrading two Kawasaki robots and replacing four Kobelco robots with new Kawasaki robots.
Join the New LinkedIn Group 'Motion Control Fundamentals'
Created by Electromate.com, this New LinkedIn Technical Group strives to advance the knowledge of the fundamentals of Electro-mechanical Motion Control.
New ElectroCraft AxialPower Plus and L3 Linear Actuators
Based on modified hybrid stepping motors, ElectroCraft's New AxialPower Plus linear actuators are capable of producing linear forces up to 800 pounds and resolutions up to 0.000125" per 1.8° step.
Sagetech Corporation Achieves Coveted AS9100C Certification
Avionics innovator Sagetech Corporation today announced that it has been awarded certifications for both AS9100C and ISO 9001:2008 standards. These certifications signify Sagetech's successful compliance with recognized quality management systems, including the rigorous AS9100C aerospace quality standard.
TE Connectivity Makes New Connection with the Launch of "ARISO Contactless Connectivity" Platform Providing Power, Data and Signal Without a Physical Connection
Industry leader brings 60 years of innovation and a new way of thinking to connectivity challenges.
Industrial Magnetics, Inc. Extends Line of Transporter® LP Magnetic End-of-Arm Tooling
Industrial Magnetics, Inc. has expanded their line of Transporter® LP magnetic end-of-arm tooling, designed to magnetically transfer metal blanks, stampings & parts in automated station-to-station, press-to-press transfer and robotic pick-and-place applications.
Army, Academics Cite Progress on UAS, but Challenges Remain
Also includes developing counter-UAS defenses for the day when enemies also use unmanned aircraft to gather intelligence.
Records 9856 to 9870 of 11747
First | Previous | Next | Last
Industrial Robotics - Featured Product
Helios™2 Ray Time-of-Flight Camera Designed for Unmatched Performance in Outdoor Lighting Conditions
The Helios2 Ray camera is powered by Sony's DepthSense IMX556PLR ToF image sensor and is specifically engineered for exceptional performance in challenging outdoor lighting environments. Equipped with 940nm VCSEL laser diodes, the Helios2 Ray generates real-time 3D point clouds, even in direct sunlight, making it suitable for a wide range of outdoor applications. The Helios2 Ray offers the same IP67 and Factory Tough™ design as the standard Helios2 camera featuring a 640 x 480 depth resolution at distances of up to 8.3 meters and a frame rate of 30 fps.
