Robots to Drive Polaris RANGER at DARPA Robotics Challenge

DARPA Robotics Challenge (DRC) Finals to be held June 5-6, at the Fairplex, in Pomona, Calif.

AUVSI 2015: Horizon Unveils the World's First Hydrogen Powered, 4H-Endurance Multi-Rotor UAV

HYCOPTER will be on display starting today at booth 401 at the May 4-7 AUVSI trade show in Atlanta.

Stratasys Additive Manufacturing Solutions Selected by Airbus to Produce 3D Printed Flight Parts for Its A350 XWB Aircraft

Leading companies in a variety of industries, from aerospace and automotive to consumer goods and medical, are partnering with Stratasys to adopt additive manufacturing strategies.

DE-STA-CO Celebrates 100 Years of Innovation

Milestones highlighted online and at 2015 trade shows

AUVSI 2015 - Kairos Autonomi Unveils Unmanned Ground Vehicle Technology For Heavy Equipment At AUVSI 2015

ROBOTIC APPLIQUE KIT FOR HEAVY VEHICLES AND MACHINERY

3D Printing Highlighted at Upcoming New York Advanced Design & Manufacturing Event

New Materials and the Latest Techniques Explored at Javits Convention Center in June

RoboBusiness Shines Spotlight on Corporate Robotics

September 23-24 at the San Jose Convention Center in San Jose, CA

Service Pack 1 for TraceParts's Supplier Parts Management system

TraceParts Enterprise 2015 Service Pack 1 offers numerous improvements in performance, reliability and usability

Revolve Robotics Demonstrates Easy Telepresence Integrations with Telemedicine Ecosystem Leaders

Revolve Robotics to Demo Integrated Solutions including GeriJoy, JACO, Plantronics, swyMed, and Vidyo at ATA Booth #2226

Kickstarter - Drone For Consumers - C-mi - Achieves Successful Liftoff with Kickstarter Campaign

The C-mi campaign earned Kickstarter's coveted "Staff Pick" status while its funding goal reached 50% completion in 7 days.

MakerBot Europe and LIUC - Università Cattaneo Partner to Bring the First MakerBot Innovation Center to Europe

LIUC's MakerBot Innovation Center brings 3D printing and prototyping to students and enterprises to experience Digital Manufacturing

CyPhy Works, Inc. Revolutionizes Multi-Rotor Drone Flight with Launch of LVL 1 Drone

Helen Greiner, CEO of CyPhy Works and cofounder of iRobot, announces first consumer drone

Building Enthusiasm for Construction Robotics

Vicki Speed for Inside Unmanned Systems:  It would seem that robotic systems could provide an extra measure of safety, as well as a higher level of efficiency and machine-consistent quality. Yet, to date, the use of robotic systems on construction jobsites has been minimal.  The building industry, however, is looking with fresh eyes at robots—including at least three new systems expected to be available this year—with a focus on near-term efficiencies that make investment in the systems make sense. Demolition Days Among the first fully-realized applications of robots in the construction environment are those used to support work that comes at the end of a structure’s life, namely demolition. In fact, remotely operated demolition robots have been around for more than a decade. Robotic Building Blocks The short answer is, ‘Yes.’ There are robotic systems in development around the world that can lay bricks, set tile or finish concrete floors. Bionic Builders? While not autonomous systems, robotic exoskeletons, those high-tech wearable suits seen in futuristic movies that help mere mortals defend Earth against other beings, could be a very real part of tomorrow’s jobsite and a possible precursor to autonomous robots in the field.

Automate 2015 A Big Success For Exhibitors

Microsoft HoloLens gets real with robotics, surgery, architecture

Jared Newman for PCWorld:  At the 2015 Build conference, Microsoft tried to prove that HoloLens is more than just a neat gimmick.   The company showed off several new demos for its “mixed reality” headset, which can map digital imagery onto the user’s physical surroundings. While previous demos had focused on fun ideas like a virtual Mars walk and a living room-sized version of Minecraft, the Build presentation emphasized real-world applications for businesses and education.   For instance, Microsoft showed how architects could use HoloLens to interact with 3D models, laid out virtually in front of them on a table. They might also be able to examine aspects of a building site at full scale, with virtual beams and walls rendered before their eyes.   Not all the presentations were so serious. Microsoft also showed off an actual robot whose controls appeared in the virtual space above the robot’s head. Users could then create a movement pattern for the robot by tapping on the ground. Another demo showed how users could create their own personal screens that followed them around in real space.

Records 2611 to 2625 of 3820

First | Previous | Next | Last

Featured Product

ST Robotics Develops the Workspace Sentry for Collaborative Robotics

ST Robotics Develops the Workspace Sentry for Collaborative Robotics

The ST Robotics Workspace Sentry robot and area safety system are based on a small module that sends an infrared beam across the workspace. If the user puts his hand (or any other object) in the workspace, the robot stops using programmable emergency deceleration. Each module has three beams at different angles and the distance a beam reaches is adjustable. Two or more modules can be daisy chained to watch a wider area. "A robot that is tuned to stop on impact may not be safe. Robots where the trip torque can be set at low thresholds are too slow for any practical industrial application. The best system is where the work area has proximity detectors so the robot stops before impact and that is the approach ST Robotics has taken," states President and CEO of ST Robotics David Sands.