Sinclair Mobile Ground Control Station Elevates UAS Options
The Sinclair College National UAS Training and Certification Center has unveiled a new, custom built mobile ground control station (M-GCS), which will be used to support applied research and development, simulation, and flight training for unmanned aerial systems (UAS) operations.
Quanergy Raises $90 Million in Series B Funding
Leading Solid State LiDAR Company Surpasses $1 Billion in Valuation Attracting Top Tier Investors As It Ramps Up to Enable Mass Adoption of Life Saving Autonomous Technology
Inside 3D Printing and RoboUniverse Join with IFA Berlin to Host 3DPrinting@home and Robot@home; September 4-7, 2016
The 3DPrinting@home and Robot@home expo takes place within IFA Global Markets, an exhibition which focuses on the B2B2C and retail channels. In addition to consumer and retail 3D printers and robots, other cutting-edge exhibitor groups from around the globe will be on display within IFA Global Markets. IFA attracts over 249,000 visitors, 60% of whom are from the channel.
Robot Octopus Points the Way to Soft Robotics With Eight Wiggly Arms
Cecilia Laschi for IEEE Spectrum: The sun was sparkling on the Mediterranean Sea on the afternoon when a graduate student from my lab tossed our prize robot into the water for the first time. I watched nervously as our electronic creation sank beneath the waves. But the bot didn’t falter: When we gave it the command to swim, it filled its expandable mantle with water, then jetted out the fluid to shoot forward. When we ordered it to crawl, it stiffened its eight floppy arms in sequence to push itself along the sandy bottom and over scattered rocks. And when we instructed it to explore a tight space beneath the dock, the robot inserted its soft body into the narrow gap without difficulty.
As a professor at the BioRobotics Institute at the Scuola Superiore Sant’Anna, in Pisa, Italy, I lead a team investigating soft robotics. This relatively new field of research has the potential to upend our ideas about what robots are capable of and where they can be useful. I chose to build robots that mimic the form of the octopus for two reasons. First, because they’re well suited to demonstrate the many advantages that come when a machine can flex and squish as needed. Also, it’s an excellent engineering challenge: An octopus with eight wiggly arms, which must work together in the face of complex hydrodynamic forces, is very difficult to design and control. Cont'd...
Global Unmanned Aircraft Systems (UAS) Market Key Players and Major Regions Analysis
The Global Unmanned Aircraft Systems (UAS) Market Research Report 2021 is a professional and in-depth study on the current state of the Unmanned Aircraft Systems (UAS) Market.
International Drone Expo Announces All-New and Upgraded Activations for December Show in Los Angeles
Leading Drone Expo to Host Sanctioned Drone Race, Pitchfest, and Film Showcase
NASA's new $1 million Space Robotics Challenge to prepare robots for Mars journey
Evan Ackerman for IEEE Spectrum: Last year at the DARPA Robotics Challenge Finals, NASA announced a new challenge for humanoid robots: the Space Robotics Challenge (SRC), which will “prepare robots for the journey to Mars.” Just like the DRC, the first stage of the SRC will consist of a virtual challenge, run in the Gazebo simulator, followed up by a physical challenge using NASA’s R5 Valkyrie robots.
As of yesterday, NASA has opened registration for the SRC, and we’ll take a look at the format of the competition, the challenges that teams will need to complete, and what they can take home for winning. Cont'd...
The ABC of RPA, Part 8: Can robots and humans work in harmony?
Humans will always be required within an operation because they will need to process the one-off transactions that the robot has not been equipped to handle, and the robot will need to be programmed for any process changes.
IMTS - IMTS 2016 Visitors Offered Free Ride in "Olli," The First Self-Driving Vehicle from Local Motors
The "IMTS Ride Experience" will give show attendees a glimpse into the future of autonomous mobility in Olli, which interacts with riders through IBM Watson.
GeckoSystems, an AI Robotics Co., Signs U.S. Joint Venture Agreement
Artificial intelligence technologies and applications span:
Big Data, Predictive Analytics, Statistics, Mobile Robots, Social Robots, Companion Robots, Service Robotics, Drones, Self-driving Cars, Driverless Cars, Driver Assisted Cars, Internet of Things (IoT), Smart Homes, UGV's, UAV's, USV's, AGV's, Forward and/or Backward Chaining Expert Systems, Savants, AI Assistants, Sensor Fusion, Point Clouds, Worst Case Execution Time (WCET is reaction time.) Machine Learning, Chatbots, Cobots, Natural Language Processing (NLP), Subsumption, Embodiment, Emergent, Situational Awareness, Level of Autonomy, etc.
Integro Technologies Ranks on 35th Annual Inc. 5000
Inc. magazine today ranked Integro Technologies on its 35th annual Inc. 5000, the most prestigious ranking of the nation's fastest-growing private companies.
NASA to highlight opportunities in North Dakota at UAS Summit & Expo
NASA, UAS industry partners will explain collaboration on UTM development and future beyond visual line of sight flights
Drone World Expo Welcomes Esri, Intel® and AeroVironment as Platinum Show Sponsors
Esri Signs on as Lead Sponsor of the shows Geospatial Pavilion
Velodyne LiDAR Gears Up for the Autonomous Revolution with Investments from Ford and Baidu
In a Powerful Effort Aspiring to Save Lives
Insect-Sized Drone Will Spy On Terrorists
Source - Sky News: An insect-sized spy drone with four flapping wings and four legs is set to become Britain's latest weapon in the war on terror.
The Dragonfly drone fits in the palm of a hand and has four flapping wings and four legs.
It can fly through the air with great agility, allowing it to penetrate buildings through open windows, and perch on surfaces to eavesdrop.
It can detect incoming objects and buildings, meaning it can avoid obstacles at high speeds.
It is one of a number of pieces of kit being developed by the Ministry of Defence as part of an innovation drive. Cont'd...
Records 4861 to 4875 of 7143
First | Previous | Next | Last
Featured Product
High Performance Servo Drives for localized and distributed control applications from Servo2Go.com
Engineered to drive brushless and brush servomotors in torque, velocity or position mode, Servo2Go.com offers a broad selection of servo drives in a wide range of input voltages and output power levels.
Robotics and Automation - Featured Company
PI USA (Physik Instrumente)
PI is a privately held company that designs and manufactures world-class precision motion and automation systems including air bearings, hexapods and piezo drives at locations in North America, Europe, and Asia. The company was founded 5 decades ago and today employs more than 1700 people worldwide. PI's customers are leaders in high-tech industries and research institutes in fields such as photonics, life-sciences, semiconductors and aerospace.
