The Membrane Potentiometer
A Competitive Alternative to Traditional Linear and Rotary Position Sensors.
Robotics Emerge to Power Next-Generation Industrial Environments
Dan Dibbern and Laura Studwell for Quality Magazine: Industrial robots are expected to be the focus for investment in factory automation. According to the International Federation of Robotics (IFR), investment in industrial robots is expected to grow at an annual rate of 12% from 2015 to 2017. The packaging industry is experiencing a surge in robotic integration throughout primary, secondary and tertiary packaging—from processing, assembly, labeling and cartoning to case packing and palletizing.
The driving force behind the surge in robotics sales growth in North America is the Food Safety Modernization Act (FSMA). The FSMA is requiring companies to introduce automated machinery and components into the production process to help eliminate potential product quality and integrity issues.
With the FSMA about to publicly release its requirements, the use of robots in packaging is at the point of takeoff. And with recent technical advances in robotics helping to power the new wave of interest, companies are experiencing first-hand that robots are faster, smarter and more affordable than ever before.
18,000+ Students Bring Their Custom-Built Robots to the Largest Sport for the Mind™ Showdown, the 2015 FIRST® Championship
Building Enthusiasm for Construction Robotics
Vicki Speed for Inside Unmanned Systems: It would seem that robotic systems could provide an extra measure of safety, as well as a higher level of efficiency and machine-consistent quality. Yet, to date, the use of robotic systems on construction jobsites has been minimal. The building industry, however, is looking with fresh eyes at robots—including at least three new systems expected to be available this year—with a focus on near-term efficiencies that make investment in the systems make sense.
Demolition Days
Among the first fully-realized applications of robots in the construction environment are those used to support work that comes at the end of a structure’s life, namely demolition. In fact, remotely operated demolition robots have been around for more than a decade.
Robotic Building Blocks
The short answer is, ‘Yes.’ There are robotic systems in development around the world that can lay bricks, set tile or finish concrete floors.
Bionic Builders?
While not autonomous systems, robotic exoskeletons, those high-tech wearable suits seen in futuristic movies that help mere mortals defend Earth against other beings, could be a very real part of tomorrow’s jobsite and a possible precursor to autonomous robots in the field.
Microsoft HoloLens gets real with robotics, surgery, architecture
Jared Newman for PCWorld: At the 2015 Build conference, Microsoft tried to prove that HoloLens is more than just a neat gimmick.
The company showed off several new demos for its “mixed reality” headset, which can map digital imagery onto the user’s physical surroundings. While previous demos had focused on fun ideas like a virtual Mars walk and a living room-sized version of Minecraft, the Build presentation emphasized real-world applications for businesses and education.
For instance, Microsoft showed how architects could use HoloLens to interact with 3D models, laid out virtually in front of them on a table. They might also be able to examine aspects of a building site at full scale, with virtual beams and walls rendered before their eyes.
Not all the presentations were so serious. Microsoft also showed off an actual robot whose controls appeared in the virtual space above the robot’s head. Users could then create a movement pattern for the robot by tapping on the ground. Another demo showed how users could create their own personal screens that followed them around in real space.
Video - Milling a Statue out of Soft Foam
This is an example of high speed milling of a soft foam statue into a sculpture using Robotmaster and a KUKA Robot. The 7-axis robot allows accurate cutting from all angles.
Fetch Robotics' Fetch & Freight
From Fetch Robotics (the core team from Unbounded Robotics/all former employees of Willow Garage):
The Fetch Robotics’ system is comprised of a mobile base (called Freight) and an advanced mobile manipulator (called Fetch). Fetch and Freight can also use a charging dock for autonomous continuous operations; allowing the robots to charge when needed and then continue on with their tasks. In addition, the system includes accompanying software to support the robots and integrate with the warehouse environment. Both robots are built upon the open source robot operating system, ROS.
Fetch is an advanced mobile manipulator, including features such as:
Telescoping spine with variable height from 1.09 to 1.491 meters
Capacity to lift approximately 6 kgs.
3D RGB Depth Sensor
Back-Drivable 7DOF Arm
Modular Gripper Interface
Head Expansion Mount Points
Pan-Tilt Head
Differential Drive
ROS-Enabled
Freight is a modular base, used separately or in conjunction with Fetch. Features include:
Base Expansion Mount Points
Payload support of approximately 68 kgs.
2D Laser Scanner
Stereo Speaker
Computer Access Panel
Run-Stop
ROS-Enabled
( full press release )
Planting Trees With Drones
From The Independent:
A drone start-up is going to counter industrial scale deforestation using industrial scale reforestation.
BioCarbon Engineering wants to use drones for good, using the technology to seed up to one billion trees a year, all without having to set foot on the ground... ( cont'd ) ( projects website )
AGROBOT: Strawberry Harvesters
From AGROBOT:
AGB® manages a set of robotic manipulators able to locate and identify your strawberries, selecting them based on their size and degree of ripeness.
This system analyzes your fruit one by one, and it is responsible for ordering cutting movements that guarantee accuracy, smoothness, and sensitivity in the strawberry treatment. The fruit, picked with the strictest hygiene conditions, is driven by our FlexConveyor System to the packaging area. Select the ripeness you would pick up.
AGvision ® is an artificial vision system that identifies your fruit with maximum accuracy and consistency. Its advanced technology, implement in real time a protocol for morphological and color analysis which systematically return the ripeness of the fruit, discriminating exclusively those strawberries which meets the quality standards previously set by the farmer... ( more details )
Case Study: Validated High Speed Capping
SMACs LAR Series linear-rotary actuators provide the ideal technology for improving capping quality while cost-effectively providing 100% real time on- and off-torquing validation.
Rethinks New Robot: Sawyer
From Rethink:
Introducing Sawyer – the revolutionary new high performance collaborative robot designed to execute machine tending, circuit board testing and other precise tasks that are impractical to automate with industrial robots.
Smaller Footprint, Longer Reach
Smaller and lighter weight than Baxter, and with 7 DOF and a 1026 mm reach, Sawyer can maneuver into the tight spaces and varied alignments of work cells designed for humans.
International Availability
With a base price of $29,000, Sawyer will initially be available in North America, Europe, China and Japan, with limited availability beginning in mid-2015.
Intera 3
Like Baxter, Sawyer is powered by the industry’s best and most intuitive software platform, Intera. It features the same iconic “face” screen (with a refreshed and even more expressive design) that helps it communicate with co-workers, along with the train-by-demonstration user interface that revolutionized how robots can be deployed on factory floors. Sawyer runs on the same version of Intera as Baxter, and will continue to evolve and improve with regular upgrades... (more details) (more about Intera software)
ABB launches YuMi and acquires gomTec
ABB leapt into the collaborative robotics space at the Hannover Messe trade show by launching their two-armed YuMi robot and simultaneously announcing their acquisition of German startup gomTec
Star Wars' BB-8
From the new Star Wars:
Low Cost Vision System
The vision system sends coordinates to the robot so it can be gripped by the robot regardless of position.
NASA's Modular Robotic Vehicle (MRV)
From NASA at the Johnson Space Center:
Records 1426 to 1440 of 2102
First | Previous | Next | Last
Industrial Robotics - Featured Product
igus® - Free heavy-duty plastic bearings sample box
The iglide® heavy-duty sample box provides a selection of five unique iglide bearings, each suitable for use in heavy-duty equipment due to their self-lubricating, dirt-resistant properties. Each bearing material boasts unique benefits and is best suited for different application conditions, though each can withstand surface pressures of at least 11,603 psi at 68°F.
