Aspect Automation and Universal Robots
No software expertise needed. The robot comes with a touch screen teach pendant as the main method of programming. In teach mode, the robot can be manually moved about its workspace to be taught positions for the program.
Distribution Centers: An Emerging Robotics Frontier
This article originated as a profile of one company as they began to robotically augment distribution centers. But, as I gathered information, the story has morphed into a review of why Kiva Systems' innovative methods - the goods-to-man methodology - is far superior to other older styles of fulfillment.
Introductory To The Element Robotics Development Platform
Fast robotics development using the Element Robotics Development Platform and the .NET framework.
Interview with David Sands of ST Robotics
Users who have never programmed anything at all before can set up our robot, type their first command and immediately see a result without requiring an integrator or consultant to install and program the robot. Additionally ST Robotics follows up with unlimited technical support.
Magneto-Inductive Communication: Interview with Steve Parsons, Ultra Electronics
To validate and demonstrate our Through-the-Earth capability, we developed a full-duplex MI Modem (MIM-1000) and installed it on a Pioneer 3-AT R&D robot. Initial field trials were carried out at an abandoned coal mine in Nova Scotia, Canada, where we successfully demonstrated the robot - we call her "Maggie" - being driven and maneuvered remotely by an operator located on the mines surface with Maggie located in an underground mine shaft separated by over 100 feet of geological overburden.
Cars Are The New UGVs
Will todays developers of military UGVs be tomorrows manufacturers of autonomous civilian cars? Probably not. However, it is clear that the technologies developed for one will be adapted for another.
Interview With Martin Buehler, Vice President of Logistics Solutions, Vecna Medical
Hospitals, clinics, providers and other end users should engage with the robot vendor closely and early on as a partner. Among other things, this allows both parties to identify the highest value applications, some of which may not have been apparent at the outset.
TP80 Fast Picker: Interview With David Arceneaux, Staubli
The new TP80 fast Picker robot from Stäubli Robotics introduces innovative, high-speed four-axis kinematics for pick and place applications. This high-speed robot achieves peak rates of well over 200 picks per minute.
A nose is a nose, or is it?
An electronic nose has a gas-sensor array sampling system and a signal processor coupled to a recognition system, where the sampling system moves vapor laden air into the sensor array. It could even work similar to a passive smoke detector.
Quality Control and Error Prevention in Food Packaging
Having a wrong label on a can of food, or a wrong lid on a cup of margarine, could have serious consequences to the manufacturer and the retailer, as well as the consumer. An automatic identification solution using 1D and 2D barcodes is a reliable way to improve quality control in the food packaging process, ensure safety and to avoid human errors.
Galil DMC-4080 Helps Guide Remote Controlled Vehicle Used in Hyper-Realistic Military Training
STOPS engineers found the native Galil programming language easy-to-use, which helped enable them to incorporate several safety routines into the operating system. For example, whenever the controller does not receive a data stream, it goes into a fail-safe routine that brings the vehicle to a stop.
Two Different Approaches to Spawn Robotics - One Common Thread
Sometimes a company is founded because it stumbles upon a niche that it can fill better than any other company. Such a company is RE2 (Robotics Engineering Excellence). Founded by Jorgen Pedersen as a contract engineering house to fill a need for unmanned systems engineering expertise within Carnegie Mellons National Robotics Engineering Center (NREC), RE2 now provides mobile manipulation systems for defense and safety.
Future Concepts and the ExoHand
Festos ExoHand is an exoskeleton that can be worn like a glove, combining smart features invented by the engineers with the smart and flexible solutions from nature. The fingers can be actively moved and their strength amplified; the operators hand movements are registered and transmitted to the robotic hand in real time.
Our Ongoing OpenCV Resource
Here are several educational resources to help you learn about OpenCV (Open Source Computer Vision Library)
Autonomous Mobile Robots
ADAM AMRs mimic human behavior. In a textbook example of lean manufacturing, ADAM is designed to predictably and instantaneously react to the electronic request of the machines for service, delivering what the production cell wants in the exact time and quantity it wants, connecting islands of automation for optimal efficiency.
Records 1891 to 1905 of 1971
First | Previous | Next | Last
Featured Product
ResinDek® TRIGARD® ESD ULTRA FOR HIGH-TRAFFIC ROBOTIC APPLICATIONS
To maximize the productivity of an autonomous mobile robot (AMR) or automatic guided vehicle (AGV) deployment, it's critical to create the optimal environment that allows the vehicles to perform at their peak. For that reason, Cornerstone Specialty Wood Products, LLC® (www.resindek.com) created the TriGard® ESD Ultra finish for its ResinDek® engineered flooring panels. The TriGard ESD Ultra finish is ideal for high-traffic robotic applications characterized by highly repetitive movement patterns and defined travel paths.
