The ABC of RPA, Part 7: How will robotics and automation affect my employees?

In the long term, job roles will shift away from their traditional remits and evolve to meet the needs of the modern, automated workplace.

Stanford's 'Jackrabbot' paves way for social robotics

Caitlin Ju for The Stanford Daily:  Stanford researchers in the Computational Vision and Geometry Lab have designed an autonomously navigating robot prototype that they say understands implicit social conventions and human behavior. Named “Jackrabbot” after the swift but cautious jackrabbit, the visually intelligent and socially amicable robot is able to maneuver crowds and pedestrian spaces. A white ball on wheels, the Jackrabbot is built on a Segway system and contains a computing unit and multiple sensors that acquire a 3-D structure of the surrounding environment. 360-degree cameras and GPS also enhance the robot’s navigation and detection capabilities. To interact smoothly in public settings, the robot has to know how to avoid someone in a natural way, how to yield the right-of-way and how to leave personal space, among other skills.   Cont'd...

Inside the Biorobotics Laboratory at the University of Washington

Robotic surgery has treated over 3 million patients

What IS an Encoder?

Encoders use different types of technologies to create a signal, including: mechanical, magnetic, resistive and optical - optical being the most common.

Siemens' World-record Electric Aircraft Motor Punches Above Its Weight

From Gizmag:   Researchers at Siemens have created a new prototype electric motor specifically designed for aircraft that weighs in at just 50 kg (110 lb) and is claimed to produce about 260 kW (348 hp) at just 2,500 RPM. With a quoted power five times greater than any comparable powerplant, the new motor promises enough grunt to get aircraft with take-off weights of up to 1,800 kg (2 ton) off the ground... ... As a result, the new aircraft electric drive system achieves a claimed weight-to-performance ratio of 5 kW per kilogram. This ratio is an exceptional figure – especially if compared to similarly powerful industrial electric motors used in heavy machinery that produce less than 1 kW per kilogram, or even to more efficient electric motors for vehicles that generate around 2 kW per kilogram... (full article)  

Robotics, automation, and how a strong network is needed to connect it all up

Manish Sablokk for IoTTech:  Cutting-edge robots and other advanced smart machines are set to be added into the rapidly expanding Internet of Things, which is projected to reach 25 billion devices by 2020. Robotics has already been used in manufacturing to great effect for over a decade, performing delicate and precise tasks with a higher success rate than humans. With advancements such as 'deep learning' robots, delivery drones and ubiquitous knowledge-sharing between machines, widespread robotics adoption is becoming far more feasible. In healthcare, there are already robotic services in operation with automated pharmacy dispensing and robotic trolleys - robots that can navigate between floors and even call the lift using a Wi-Fi sensor. The hospitality sector has also been a keen adopter of robotics to deliver services and in education, robots are being deployed successfully as a tutor, tool or peer in learning activities, providing language, science and technology education.   Cont'd...

The ABC of RPA, Part 6: Are robotics and automation in conflict with my IT Department?

It's important that your IT staff understand the impact of automation - more importantly, that it is not a replacement for your IT team.

Solving the Custom Robot Parts Challenge: The Deshazo-MFG.com Story

The number of unique parts required is high - some 200 parts in the past year or so - but the volume in which each part is needed is low, often only one or two.

Raspberry Pi And MATLAB based 3D Scanner

Raspberry Pi serves as the main controller board for the setup, capturing the images using the Pi Camera, controlling the Line LASER diode and providing control signals to the EasyDriver (Stepper Motor Driver).

University of Surrey presents a roadmap of space robotics

ABIGAIL BEALL FOR MAILONLINE:  Many people spend their childhood peering up into the vast expanse of the sky, dreaming of growing up to become an astronaut.  But these dreams could be dashed as the idea of people venturing into space will one day become a distant memory, according to a report published today.  Robots will eventually have enough capabilities to replace humans and other animals on space missions, experts have said.  Many missions involving humans in space are dangerous and expensive.  But for years robots have been sent to places humans could not venture, like the rovers venturing to the edges of our solar system.  According to European Space Agency (Esa) Astronaut Roberto Vittori, who launched a paper on space robotics and autonomous systems, robots can help carry out these dangerous missions.   Cont'd...

Everything You Need to Know About Stepper Motors

Recent servo motors are equipped with the encoder of 20 bits (1,048,576 steps) which has a very fine resolution. Because of this, errors due to the encoder installation accuracy have a huge effect on stopping accuracy.

What's Happening in Robotics? Five Trends to Watch

2016, through mid-June, shows 56 startups received $427.5 million; and that 20 acquisitions have happened thus far totaling $4.53 bn (from the 11 reporting amounts involved).

The Third Offset Must Update Asimov's Laws of Robotics

JG Randall for The National Interest:  Things tend to happen in threes. An unlikely triumvirate on the surface, it would appear that Asimov’s laws on robotics and the UN Convention on Conventional Weapons (CCW) will outflank the Third Offset—the nation’s search for its next silver bullet in war fighting is robotics—knowing that many nations will agree on moral grounds. These nations will reject Asimov based on semantics, and though the debate might be perceived as strictly academic, or even rhetorical, it is worth discussing for the sake of a good cautionary tale. Because, whether we like it or not, killer bots are coming to a theater of operation near you. Before we get deep in the weeds, let’s get some clarity. First, let’s outline Asimov’s robotic laws. The Three Laws of Robotics are a set of rules devised by the science fiction author Isaac Asimov. They were introduced in his 1942 short story “Runaround,” although they had been foreshadowed in earlier stories.   Cont'd...

Artificial muscle for soft robotics: Low voltage, high hopes

Phys.org:  Soft robots do a lot of things well but they're not exactly known for their speed. The artificial muscles that move soft robots, called actuators, tend to rely on hydraulics or pneumatics, which are slow to respond and difficult to store. Dielectric elastomers, soft materials that have good insulating properties, could offer an alternative to pneumatic actuators but they currently require complex and inefficient circuitry to deliver high voltage as well as rigid components to maintain their form—both of which defeat the purpose of a soft robot. Now, researchers at the Harvard John A. Paulson School of Engineering and Applied Sciences (SEAS) have developed a dielectric elastomer with a broad range of motion that requires relatively low voltage and no rigid components. They published their work recently in Advanced Materials.   Cont'd...

Robot Vision vs Computer Vision: What's the Difference?

Unlike pure Computer Vision research, Robot Vision must incorporate aspects of robotics into its techniques and algorithms, such as kinematics, reference frame calibration and the robot's ability to physically affect the environment.

Records 481 to 495 of 1628

First | Previous | Next | Last

Featured Product

KEBA - KeTop Operating & monitoring - from mobile to stationary with just one software

KEBA - KeTop Operating & monitoring - from mobile to stationary with just one software

Best ergonomics and an intuitive user interface are key factors for efficient operation and monitoring. With the KeTop devices, high-performance, application-optimized hardware is available. The turnkey TeachView robotics user interface enables fast and easy teach-in. User-friendly HMIs are created with the easy-to-operate KeView visualization software - an optimum user experience is guaranteed.