ReconRobotics Introduces The Throwbot XT Reconnaissance Robot

1.2-lb Micro-Robot to Provide Both Video and Audio Reconnaissance Capabilities to Warfighters and SWAT personnel

Bosch Indego Robotic Lawnmower

IEEE Spectrum has info about a new autonomous lawnmower from the German company Bosch. Seems the only official info available at the moment is a Swedish press release but it appears the mower communicates with its docking station (and maybe GPS) allowing the unit to cut areas in ordered parallel lines rather than the chaotic back and forth paths you see from other sensor based robotic lawnmowers or vacuums. You will still have to install wire around the perimeter so the robot stay on the grass. The battery lasts 20 minutes per charge and resumes where it left of after a 90 minute charge.

Honeywell rolls out new High Sensitivity Bipolar Latching Digital Hall-effect Sensor ICs

Honeywell's new SS360NT/SS360ST/SS460S High Sensitivity Bipolar Latching Digital Hall-effect Sensor Integrated Circuits utilize bipolar latching magnetics which make these products perfect for accurate speed sensing and revolutions-per-minute (RPM) measurement. These new sensors offer reliable switching points with high magnetic sensitivity of 30 G typical (55 G maximum) without using chopper stabilization on the Hall element, resulting in a clean output signal and the fastest latch response time in its class

Swedish Defence Materiel Administration Orders AeroVironment Puma AE and Wasp Small Unmanned Aircraft Systems

Swedish Army adopts "Family of Systems" approach with AeroVironment small unmanned aircraft systems (UAS)

Mazor Robotics Announces First Brain Cases Using Its Robotic Platform

Mazor expands clinically validated technology from spine into guided brain operations

iRobot Receives $12.7 Million Order for Small Unmanned Ground Vehicles

iRobot Corp., a leader in delivering robotic technology-based solutions, has received a $12.7 million order from the U.S. Army Contracting Command in Warren, Michigan for 68 of the company's model 310 SUGV robots and spares kits. All deliveries will be completed by August 31, 2012.

Wynright Introduces New Hybrid Light and Voice eFulfillment Materials Handling System

Innovative design improves productivity by allowing pickers to fill multiple discrete orders concurrently

NOVEL SERVO DRIVES BOOST MACHINE PERFORMANCE

New designs provide up to 25 % faster acceleration

Upcoming GstarCAD2012 Architecture Brings Innovation to AEC Design

The upcoming GstarCAD2012 Architecture will be launched in the next few months by GstarCAD, the leading 2D/3D CAD software provider. Based on GRX/ARX technology, this software is a mature product in architectural industry, featuring with high efficiency and ease of use.

International Cooperation Unites IEEE and CCSA for New "Internet of Things" Workshop

Leading Standards Organizations Join Forces to Explore Common Global Architecture for Next Internet Generation

InvenSense® Expands Into Industrial Applications With the World's First Single-Chip, Integrated High-Performance 3-Axis Industrial Gyroscope

MPU-3300 breakthroughs include more than 100% lower noise, 10X smaller size, and a 3X price advantage vs. other industrial gyroscopes

QUAN 'Follows the Money' in Robotics

QUAN has initiated discussions with multiple cutting-edge robotics firms regarding agreements to help fund, market and develop exciting new robotics products

BaTboT

The Fluid Mechanics Laboratory and the Swartz Lab at Brown University are in development of a biological inspired bat robot platform that aims to reproduce the amazing maneuverability of these flying mammals. Bats exhibit extraordinary flight capabilities that arise by virtue of a variety of unique mechanical features. These flying mammals have developed powerful muscles that provide the folding and extension of their wing-membrane during flight (morphing). The maneuverability is achieved by reproducing the flapping and morphing capabilities of their wing-skeleton structure. This structure is composed by several joints and a membrane that generates the required lift forces to fly. Each wing has 4 degrees of freedom: the shoulder has two, the elbow joint is actuated by Migamotors SMA-muscles, and the wrist is an under-actuated joint that moves as a function of the elbow. The robot morphology is alike in proportion compared to the biological counterpart (half the size): total wingspan: 50cm, humerus length: 5.5cm, and radius: 7cm. The total weight of the skeleton is 34g (including both wings). The morphing actuation mechanism attached to the humerus bone is based on smart muscles that provide elbow rotation.   More info can be found on their research site here.

RMT Robotics Appoints Bill Torrens as Director, ADAM Systems Group

RMT Robotics® (www.rmtrobotics.com), a Cimcorp Oy company and the manufacturer and integrator of ADAM™ autonomous mobile robot (AMR) (www.adamrobot.com), announces the appointment of Bill Torrens as director of the ADAM Systems Group. In this new capacity, Torrens will lead the ADAM Systems Group in

iPOS3604-VX : When Intelligence Matters !

A Complete Drive Solution Packed on only 21 x 54 mm of PCB Space

Records 11446 to 11460 of 12387

First | Previous | Next | Last

Industrial Robotics - Featured Product

Zimmer Group - THE PREMIUM GRIPPER NOW WITH IO-LINK

Zimmer Group - THE PREMIUM GRIPPER NOW WITH IO-LINK

IO-Link is the first standardized IO technology worldwide for communication from the control system to the lowest level of automation.

Robotics and Automation - Featured Company

Elmo Motion Control Inc.

Elmo Motion Control Inc.

Elmo has been a motion control technology leader for over 35 years, with millions of servo drives working 24/7 worldwide. Elmo offers complete motion control solutions from design to delivery of cutting-edge servo drives, network-based multi-axis motion controllers, and integrated servo motors. All solutions can be customized and configured using Elmo's proprietary advanced and easy-to-use software tools for any machine in any industry, such as semiconductors, lasers, robots, life sciences, industrial automation, AGV, and more. The company employs more than 350 personnel with headquarters in Israel and offices in the United States, China, Germany, Italy, Korea, Singapore, and an additional manufacturing facility in Poland. Elmo has a worldwide distribution network. By advancing motion control with state-of-the-art technology, Elmo makes smart machines even smarter. As of 2022, Elmo is a Bosch Rexroth company.