Effect of Robotic Driverless Vehicles on Auto Insurance Costs
The effects of RDVs is requiring the insurance industry to change its business dynamics whereby a greater portion of the liability will be moved from the car owner to the car manufacturer and infrastructure providers (federal and state).
Upcoming Tradeshow, Conference & Exhibition Summary - August, September & October
The end of Summer and beginning of Fall brings alot of great tradeshows for the Robotics and Advanced Manufacturing industry. The Chicago area is the place to be with several great shows scheduled. Here is a look at some of the key events for the next few months.
Parallella: $119 Parallel Computing Platform with 16-core Epiphany chip
Parallella Computer Specifications:
The Parallella platform is an open source, energy efficient, high performance, credit-card sized computer based on the Epiphany multicore chips developed by Adapteva. This affordable platform is designed for developing and implementing high performance, parallel processing applications developed to take advantage of the on-board Epiphany chip. The Epiphany 16 or 64 core chips consists of a scalable array of simple RISC processors programmable in C/C++ connected together with a fast on chip network within a single shared memory architecture... ( cont'd )
A realtime raytracing example running on the 16-core Epiphany chip:
Machine Vision Technology Ensures Product Quality and Traceability at Del Monte Foods
A comprehensive Del Monte quality initiative sought to ensure product code legibility, and improve labeling accuracy and overall traceability of its canned fruits and vegetables.
Raspberry Pi Model B+
From Eben Upton, Raspberry Pi Founder:
This isn’t a “Raspberry Pi 2″, but rather the final evolution of the original Raspberry Pi. Today, I’m very pleased to be able to announce the immediate availability, at $35 – it’s still the same price, of what we’re calling the Raspberry Pi Model B+.
The Model B+ uses the same BCM2835 application processor as the Model B. It runs the same software, and still has 512MB RAM; but James and the team have made the following key improvements:
More GPIO. The GPIO header has grown to 40 pins, while retaining the same pinout for the first 26 pins as the Model B.
More USB. We now have 4 USB 2.0 ports, compared to 2 on the Model B, and better hotplug and overcurrent behaviour.
Micro SD. The old friction-fit SD card socket has been replaced with a much nicer push-push micro SD version.
Lower power consumption. By replacing linear regulators with switching ones we’ve reduced power consumption by between 0.5W and 1W.
Better audio. The audio circuit incorporates a dedicated low-noise power supply.
Neater form factor. We’ve aligned the USB connectors with the board edge, moved composite video onto the 3.5mm jack, and added four squarely-placed mounting holes... ( cont'd )
Where will the 3D Printing Industry Cluster?
Innovation networks tend to cluster around specific regions because all the necessary ingredients of finance, people, infrastructure & regulation tend to converge in one area by accident & design.
Intro to Shape Memory Alloy Actuation Using Flexinol
From Jie Qi's projects page:
Shape memory alloys (SMAs) are metals that change shape when heated up. They are wonderful actuators in that they are light, silent and can be "turned on" by simply running current through. The shape that they change to can also be set, though this process is a bit more tricky. Flexinol is a particular brand of nitinol, which is an SMA made of nickel and titanium, and is pre-set to contract about 10% of its original length when heated.
In my projects, I generally used the 0.006" to 0.01" diameter, High-Temp wires.
Since Flexinol draws a lot of current (about 300mA for the diameters I used), you need a strong power supply like a wall supply or a good lithium-ion battery. I've used from 3.7V up to 6V (any more and my Flexinol wires would start overheating). To turn the Flexinol on, I would simply short the ends of the wire to the power. For digital control, I used a standard MOSFET circuit which is a digital switch that can be turned on and off using a microcontroller... ( cont'd )
RobLog Industrial Demonstrator Entrance for Robotic Logistics
The design and construction of the RobLog Industrial Demonstrator was made under the requirements for such a machine to be robust yet have a streamlined design, flexible enough to fit into different space confinements, such as loading docks or warehouses.
Interview with e-NABLE Founder Jon Schull
By far, one of the most inspirational and impressive projects thats come from the 3D printing/DIY community has been the work were seeing on open-source assistive devices, and one online organization that is playing a major role in making this happen is e-NABLE, a group started by Dr. Jon Schull of Rochester Institute of Technology.
BugJuggler: Project to build 70ft tall robot that juggles cars
Project Overview:
BugJuggler will use a diesel engine to generate hydraulic pressure. An operator located in the robot’s head will be able to control its motions using a haptic feedback interface connected to high-speed servo valves. Hydraulic accumulators - essentially storage batteries for hydraulic fluid - will allow for the rapid movement required for the robot to juggle cars or other large, heavy objects.
The first stage of the BugJuggler project will be construction of a working 8ft tall single arm proof-of-principle juggler able to toss and catch a 250lb mass... ( cont'd )
A Robot Valet Will Park Your Car at This German Airport
Last week, Düsseldorf airport (DUS) introduced robot valets to take the hassle out of parking for travelers. Travelers can leave their cars at the arrival level of the ParkingPLUS structure. As they leave, they confirm on a touch-screen that no one is in the car.
The robot valet, nicknamed "Ray," takes it from there. The robot measures the vehicle, picks it up with a forklift-like system, and takes it to the back area, where it will position it in one of the 249 parking spots reserved for automated valets.
The machine is capable of carrying standard cars weighing up to 3.31 tons. The robot valet is even connected to the airport's flight data system, and by checking customer trip data with the database, Ray knows when the customer will return for the vehicle. A traveler can note any itinerary changes in a parking app, which is available for iOS and Android.
Dissembling a 1980s Kuka Robot
Relaxing summertime viewing of a 80s era Kuka robot being taken apart and dissected ( 20 parts total ).
Intel's 3-D Printed Robot "Jimmy"
From Wired:
Intel describes Jimmy as a research robot, but a less sophisticated version of the adorable droid will go on sale later this year for $1,600. The caveat is that you will have to 3D print your Jimmy. The 3D printing blueprints will be available without charge, but to construct the robot you will also need to purchase a kit from Intel that will contain all the parts of Jimmy that aren't printable, including motors and an Intel Edison processor.. ( cont'd )
More For Less
The HV-100s are equipped with several options to re-space a field depending upon a growers needs.
Carl Dekker of Met-L-Flo Discusses Challenges and Opportunities Arising in Additive Manufacturing
The industry needs standards for workforce development training, process repeatability and reliability, and process control.
Records 3031 to 3045 of 3576
First | Previous | Next | Last
Featured Product
ResinDek® TRIGARD® ESD ULTRA FOR HIGH-TRAFFIC ROBOTIC APPLICATIONS
To maximize the productivity of an autonomous mobile robot (AMR) or automatic guided vehicle (AGV) deployment, it's critical to create the optimal environment that allows the vehicles to perform at their peak. For that reason, Cornerstone Specialty Wood Products, LLC® (www.resindek.com) created the TriGard® ESD Ultra finish for its ResinDek® engineered flooring panels. The TriGard ESD Ultra finish is ideal for high-traffic robotic applications characterized by highly repetitive movement patterns and defined travel paths.
