From Paracosm: Paracosm, a cloud-based software company, raised 3.3 million in seed round funding to further its mission to 3D-ify the world. The round, led by Atlas Venture, includes contributions from iRobot, Osage University Partners, BOLDstart Ventures, New World Angels, Deep Fork Capital and a number of angel investors. Paracosm's advanced three-dimensional reconstruction technologies create digital models of physical spaces. When shared with machines, these models serve as blueprints which provide robots and applications a greater sense of awareness and understanding of the physical world. Such technologies are valuable for robotics, video game development, special effects, indoor navigation applications, and for the improvement of both virtual and augmented reality experiences... ( full press release )
In this white paper, NEXCOM will explain how the NEXCOM IoT controller NIFE 100 provides a unique open-architecture solution with the configuration flexibility to surmount communication barriers in building the Factory-of- Things and supporting the necessary data communications for connecting the enterprise domain and the operation domain.
Replacing legacy application-specific integrated circuits (ASIC) with x86 architecture allows the company to deliver products just in time and to achieve about 20 percent of overhead in inventory.
Integrated 2D Imaging Engine from Microscan Helps Improve Production Yield, Quality and Traceability at Each Step of the PCB Manufacturing Process
Case Study: Prodrive Technologies, The Netherlands
Enter the discipline of haptics, which involves using robotics with sophisticated feedback and controls to simulate a tactile experience for the user.
Combining magnetic field immunity with high precision motion over inches of travel, piezo "leg" motors walk the line.
From Harvard Biodesign Lab: The Soft Robotics Toolkit is a collection of shared resources to support the design, fabrication, modeling, characterization, and control of soft robotic devices. The toolkit was developed as part of educational research being undertaken in the Harvard Biodesign Lab. The ultimate aim of the toolkit is to advance the field of soft robotics by allowing designers and researchers to build upon each other’s work. The toolkit includes an open source fluidic control board, detailed design documentation describing a wide range of soft robotic components (including actuators and sensors), and related files that can be downloaded and used in the design, manufacture, and operation of soft robots. In combination with low material costs and increasingly accessible rapid prototyping technologies such as 3D printers, laser cutters, and CNC mills, the toolkit enables soft robotic components to be produced easily and affordably... ( project's homepage )
Lightweight, high-efficiency servomotors stabilize and position sensor turrets on unmanned aerial vehicles.
Robotmaster Software Is Used To Create An Automated Way Of Producing Custom Orthotics Using Milling Robots
Our simplified working procedure imports the unique patient 3D model into a preprogrammed production design strategy that takes account of all the pertinent milling and robot articulation data.
Kickstarter for version 4 of ArduIMU: Initially, the ArduIMU project was started as an open source project by 3DRobotics in 2007 to create an inertial measurement unit based on the Arduino™. We contributed to the software development of that project, but, the initial ArduIMU was meant to be used solely as an inertial measurement unit. We want to do better than that; so we developed a brand new platform with other sensors such as a barometer, relative humidity sensor, and light sensor. We also included wireless communication capabilities as well an SD card for data logging and storage. Since then, we have gone through many revisions, adding even more sensors and functions which are present in the latest ArduIMU V4. With this new augmented and improved sensor board we are redefining the term IMU. We proudly present our Arduino™ based Integrated Measurement Unit: the ArduIMU V4... ( cont'd )
From University of Tokyo: ACHIRES is composed of high-speed vision and high-speed actuators to achieve instantaneous recognition and behavior. The similar technologies are used in our Janken (Rock Paper Scissors) Robot. High-speed vision detects the state of the biped robot including the timing of landing at 600 fps. The biped mechanism with the leg length of 14 cm is set to run in the sagittal plane. At present, the running velocity reaches 4.2 km/h. Simple control based on high-speed performance of sensory-motor system enables the biped robot to stably run without falling, unlike computationally expensive ZMP-based control which is commonly used for balance. The aerial posture is recovered to compensate for the deviation from the stable trajectory using high-speed visual feedback. We also address a task of somersaulting. While running, the robot takes a big swing with one foot and jumps. After takeoff, both legs are controlled to curl up for high-speed rotation in the air. ACHIRES is going to be improved to push the envelope while demonstrating various biped locomotion tasks... ( cont'd )
Back to school and back to work with the tradeshow schedule for the Robotics and Advanced Manufacturing industry heating up. This year RoboticsTomorrow has setup a special newspage devoted to news and announcements from International Manufacturing Technology Show (IMTS 2014) taking place beginning of September.
With 3D CAD software, designers can actually simulate a robot's capabilities by reviewing how the robot's construction will be effected by the selected materials.
From IEEE Spectrum: Printable, self-folding robot created by Harvard and MIT researchers... ( IEEE Spectrum story ) ( full paper )
From hitchBOT's page: I am hitchBOT — a robot from Port Credit, Ontario. I am traveling from Halifax, Nova Scotia to Victoria, British Columbia this summer. As you may have guessed, robots cannot get driver’s licences yet, so I’ll be hitchhiking my entire way... ( cont'd )
Records 676 to 690 of 722
Mobile & Service Robots - Featured Product
The C-series high performing inertial sensor package provides an OEM form-factor that is optimized for size and weight in Off Highway, Unmanned Ground Vehicles/Mobile Robots and Unmanned Aerial Systems. It's compact and low-profile anodized aluminum housing can be connected directly to a printed circuit board using a UART header or a Samtec FFSD ribbon cable and 2-56 fasteners.