XIMEA MU9 Series Subminiature, Board-Level Cameras Simplify OEM Integration
MU9 series industrial cameras offer high-quality monochrome and color 5 Mpix CMOS sensors, USB 2.0 interface, and APIs for more than 30 leading image processing libraries in both subminiature board-level and enclosed camera configurations.
The Biggest Manufacturing and Supply Chain Expo of 2013 Coming to Chicago January 21-24
Steve Forbes to Keynote ProMat 2013 Conference
Persimmon Technologies Receives Second National Science Foundation Grant for the Development of Highly Efficient Electric Motor Technology
New funding allows for expansion of technology to significantly improve performance and lower costs of electric motors
NEW SERVO DRIVES BOOST MACHINE THROUGHPUT AND LOWER COSTS
World debut at SPS/IPC/DRIVES , 27-29 November 2012, Nuremberg, booth 4-350
Rockwell Automation Awarded $21.7 Million Contract from U.S. Navy for Control Systems and Engineering Support Services
Rockwell Automation products and software have been installed successfully onboard various Navy and Coast Guard ships since 1997.
Northrop Grumman Selects Garmin® Integrated Flight Deck for New Optionally Piloted Aircraft
The Firebird is equipped with a tailored version of Garmin's latest touchscreen-controlled integrated flight deck system
NEW COST-EFFECTIVE, SELF-CLEANING CAMERA FILTER DEVELOPED FOR DIRTY, DUSTY ENVIRONMENTS
Created to address an unmanned vehicle need, innovative filter design maintains clear camera view while ground vehicle or surface vessel is in operation
QinetiQ North America's TALON® Robot Selected by Czech and Polish Militaries
World-renowned robot expands international presence into Central Europe
Intelligrated to showcase latest Alvey Robotics material handling solutions at Automate 2013
In-booth demonstration features robotic case packing, unpacking and palletizing capabilities
GstarCAD MC PRO: Over Hundreds Thousand Downloads after a Month Releasing
November 21, 2012, Beijing - along with the development of mobile device hardware, there were as lots of mobile CAD software on the market today. With the release of GstarCAD MC PRO for iOS and for Android last month, this Mobile CAD Client has attracted users all over the world with its features.
GstarCAD Attended CHIAC in Mexico
Beijing, China: November 21, 2012-Recently, CHIAC Mexico 2012 was held in Banamex exhibition center. As an international leading CAD products and solution provider, Gstarsoft attended this exhibition with the products of GstarCAD MC PRO, GstarCAD 2012, and GstarCAD Architecture 2012 and so on.
GstarCAD Showcased in CONSTRUIR RIO, Brazil
Rio de Janeiro, Brazil, Nov 7th - 10th, 2012 - Gstarsoft, one of the world leading providers of 2D/3D design software and its authorized distributor - Arkisoft successfully showed GstarCAD in the CONSTRUIR RIO held in Riocentro Convention Center.
ST Robotics Offers 11-Axis Tandem Robot System for under $20,000
Tandem R125 features two 5-axis vertically articulated robot arms mounted to programmable carousel. Also included are 2 interconnected K11R robot controllers enabling communications to synchronize motions of both robots or allowing robots to alternate turns while performing one task. RoboForth II software, teach pad, equipment interfacing, and cables are included in industrial system.
Innorobo Announces Initial Lineup of Speakers for 2013 International Robotics Summit
Innorobo attracts top range leaders, pioneers and researchers with international prominence.
MMP RELEASES NEW 24V DC PLANETARY GEARMOTOR FOR ROBOTICS & AUTOMATION APPLICATONS
This is to announce our latest Product Innovation, the Model MMP D33-455D-24V GP81-029 DC Gearmotor.
The fully reversible Gearmotor operates with a 24V DC Input, while consuming just 14 A of current.
Adding to its versatility, the unit is designed with a rear shaft extension, and threaded mounting holes for an integrally mounted optical encoder.
This unique design features a High Efficiency Planetary Gearing, High Output Power to size & weight ratio, Low Speed and Low Noise, in a Compact, Lightweight (Just 11 Pounds!) 24 Volt DC Gearmotor.
Please find attached the Press Release, Technical Specification Sheet, and a Photograph of this exciting new "Built in the USA" product.
Typical uses for this "Compact, Lightweight" 24 Volt DC Gearmotor would include Mobility & Accessibility Equipment, Autonomous/Robotic Vehicles, UGV's, UUV's, Alternative Energy Equipment, including Solar Tracking, Linear Actuators, Automotive Accessories, Material Handling Equipment, Moving Target Equipment, Rotating Signage, and battery powered Electric Utility Vehicles of all kinds.
This unit is able to develop its full continuous output torque of 136 In Lbs. at 140 RPM, while consuming 28.6 Amps of current. That translates to a long life battery charge, quiet operation, and lower cost drive electronics, to mention just a few of the many benefits available to the user..
Records 15796 to 15810 of 17020
First | Previous | Next | Last
Featured Product
3D Vision: Ensenso B now also available as a mono version!
This compact 3D camera series combines a very short working distance, a large field of view and a high depth of field - perfect for bin picking applications. With its ability to capture multiple objects over a large area, it can help robots empty containers more efficiently. Now available from IDS Imaging Development Systems. In the color version of the Ensenso B, the stereo system is equipped with two RGB image sensors. This saves additional sensors and reduces installation space and hardware costs. Now, you can also choose your model to be equipped with two 5 MP mono sensors, achieving impressively high spatial precision. With enhanced sharpness and accuracy, you can tackle applications where absolute precision is essential. The great strength of the Ensenso B lies in the very precise detection of objects at close range. It offers a wide field of view and an impressively high depth of field. This means that the area in which an object is in focus is unusually large. At a distance of 30 centimetres between the camera and the object, the Z-accuracy is approx. 0.1 millimetres. The maximum working distance is 2 meters. This 3D camera series complies with protection class IP65/67 and is ideal for use in industrial environments.
Robotics and Automation - Featured Company
ResinDek / Cornerstone Specialty Wood Products
As the manufacturer of ResinDek® panels, we have been at the forefront of testing and innovating flooring panels for the Material Handling Industry since 1994. In 2007, we began providing ResinDek panels for automated warehouse distribution robots. Much of our initial research and development occurred with Automated Guided Vehicles. In the last decade, we have provided a variety of ResinDek engineered flooring products to numerous Automated Guided Vehicles (AGV) and Autonomous Mobile Robot (AMR) manufacturers for their testing labs. As a result, millions of square feet of ResinDek panels are in service worldwide with robotic traffic in distribution centers, warehouses, microfulfillment centers, and retail environments.
