WowWee brings expensive university bots to store shelves
By Corinne Iozzio for Scientific American: Hong Kong–based WowWee's success stems from bringing university research projects to life that might otherwise languish in the prototype stage. A licensing agreement with the Flow Control and Coordinated Robotics Labs at the University of California, San Diego, for example, provides WowWee with access to patents and the labs with a healthy cash infusion. The collaboration has already netted a series of toy robots that balance like Segways. More recently, the avionics lab at Concordia University in Montreal began working with the company to perfect flight algorithms for a four-rotor drone. Next, chief technology officer Davin Sufer says he has his eye on the Georgia Institute of Technology and its work with swarming behaviors, which would allow a group of robots to function in tandem.
In the case of Switchbot, WowWee adapted a locomotion system developed in part by former U.C. San Diego student Nick Morozovsky. The robot moves on tank-tread legs either horizontally to navigate uneven terrain or on end to stand and scoot fully upright. Morozovsky built his prototype with off-the-shelf parts, including a set of $50 motors. The motors were a compromise; each one had the size and torque he wanted but not the speed. Over the past few years he has worked with WowWee to customize a motor with the exact parameters needed and to cut the final cost of the part down to single digits.
That back and forth yields low-cost, mass-producible parts, which means university-level robotics could become available to everyday people. “One of the reasons I went into mechanical engineering was so I could create real things that have a direct impact,” Morozovsky says. “I didn't expect that to necessarily happen in the process of grad school.” Cont'd...
Robot Taxis Are to Be Main Drive Around for 2020 Tokyo Olympics
With an еуе оn 2020, thе gоvеrnmеntÑ• revised economic strategy adopted in Junе ÑаllÑ• fоr the аррliÑаtiоn оf rоbоt tеÑhnоlоgiеѕ аѕ travel guides аt Narita International Airроrt in Chibа PrеfеÑturе, аnd Tоkуоѕ Hаnеdа airport.
3 Key Ways Automation Reduces Safety and Ergonomic Concerns
As companies continue to rely on automation to remain competitive, employees will have the benefit of working in safer environments. In the years to come, the question wont be "Is your company automating?" but instead "How is your company automating?"
7Bot: $300 6-axis Aluminum Desktop Robot Arm
From 7Bot's Kickstarter campaign:
In 2014, two of us co-founded project uArm with other two makers. There we received a lot of feedback from our Angel backers:
More axis for more powerful applications, and more controlling dimensions (force control, speed control and flexible-joint).
More rugged material rather than Acrylic, muscular servos hardly to be burned out.
More intelligent API. Better inverse kinematics and path planning algorithms to make the movement more precise and smooth.
More accessories and various of end-effectors.
Our custom servos with precise position feedback allow you to quickly set it up and operate in teaching mode without any codes. In this mode, you can simply drag each joint of the robot to a serious of desired way points. The movements will be recorded, and could be replayed in an optimized path.
A multi-platform supported 3D visualization application will be provided for you to manipulate the 7Bot Arm intuitively. With our 3D visualization application, you can easily set and read the position of each joint separately with real-time graphic interface.
If you have two 7Bot Arms, you can build this amazing Humanoid robot -7Bot Arm Dual:
Estimated shipping date is January 2015... (7Bot's Kickstarter campaign)
5 Robotics Stocks to Watch
Chad Fraser for The Street: Soon, robots could be doing much more than just vacuuming your house or assembling your next car-they could also invade your investment portfolio. If you're looking for the industry's fastest growth, you'll want to pay particular attention to what's happening on the consumer/office side, where sales are set to grow at a 17% compound annual rate between 2014 and 2019, according to a May report from Business Insider -- seven times quicker than the industrial-robot market. In addition, a number of radical new applications for robotics are emerging in the medical and defense markets, as outlined in this presentation from Investing Daily.
Even though the automation trend is clearly set, there still aren't many pure ways for investors to play it. But that doesn't mean there are no intriguing options out there. Here are five robot makers to keep on your radar screen:
Star Wars The Force Awakens BB-8 Toy Teardown
From uBreakiFix's Youtube channel:
Festo's R&D Timeline - Part 3 - 2010 & 2011
Part 3 includes more bionic robots like the smartbird and a handler modeled after an elephant trunk.
Optical Time-of-Flight Sensing Technology
Focuses on Unmanned Automotive Technologies at RoboBusiness
Soft Robotics Project Exo-Biote 3D Prints Living Movement
BY HANNAH ROSE MENDOZA for 3DPrint.com: Soft robotics is a relatively new field of research that aims to create flexible robots that are more easily adaptable to human interaction. Often, the forms of these creations and the mechanics of their movement are inspired by a close study of nature in an effort to ‘go organic’ with machines. 3D printing with flexible filament is one way in which this integration of robot and movement is taking on a flexible aspect.
For this particular installation, titled Exo-biote, the National Institute for Research in Computer and Control and the Department of Science and Visual Culture at the Imaginarium worked together, with support from Neuflize Bank, to create a robot organism that embodied the formal typologies and demonstrated the possibilities for movements in soft robots. After all, some of nature’s most amazing machines have nearly entirely soft bodies – think of the octopus, for example, able to lift, carry, walk, swim, shape change, camouflage itself, and fit through a tube no bigger than a quarter! Cont'd...
New Open Loop Current Transducers With Near Closed Loop Performance
Measured performance is at the level expected and increases the range of applications which may be addressed by open loop transducers instead of more complex solutions.
Toyota hires robotics expert for AI push
Richard Waters for FT.com: Toyota has hired the top robotics expert from the US defence department’s research arm and promised $50m in extra funding for artificial intelligence research, as it steps up the race between the world’s biggest carmakers to pioneer new forms of computer-assisted driving.
However, the Japanese carmaker maintained on Friday that completely driverless cars were still years away, and that AI and robotics would have a more complex effect on the relationship between humans and their vehicles than Google’s experiments with “robot cars” suggest.
Gill Pratt, who stepped down recently from the Defense Advanced Research Projects Agency (Darpa), will move to Silicon Valley to head Toyota’s robotics efforts, the company said. Darpa played a key role in stimulating interest in driverless cars with a competition in 2005 — the leader of the winning entry, Sebastian Thrun, who was then a professor at Stanford University, went on to found Google’s driverless car programme. Cont'd...
Bucky Fuller Friday
Animated retelling of a Buckminster Fuller story and Ephemeralization (doing more with less):
Gemini-Scout Mine Rescue Robot
Reliability, ability to travel across varied terrains, and accurate operation are essential elements for the drive system and camera controls on mining rescue robots.
Robotics Enter Hybrid Instruction
By Dian Schaffhauser for Campus Technology: A doctoral program at Michigan State University has begun experimenting with the use of robots to pull on-campus and off-campus students closer together in class. The Educational Psychology and Educational Technology (EPET) doctoral program focuses on the study of human learning and development and diverse technologies supporting learning and teaching. During a spring course in 2015 all but one student participated by being present in the form of an Apple iPad affixed to a swivel robot that was stationary; one student was on a robot that could move around the classroom.
As Christine Greenhow, the faculty member who led the seminar course, explained, the experiment was intended to expand beyond traditional Web presence of online students. "When you are using videoconferencing, it's very common to see all these different faces on the screen if you're here in the classroom and not really know where to look. It creates this distance between the speaker who's online and the speakers in the class," she said in a video about the project. "What if we could put online students in the classroom in a robot? How would their presence change?" Cont'd...
Precision Drones for Structural Inspection
PRENAVs drones take photographs from precise locations in close proximity to structures, and those photos are then used to build an accurate 3D reconstruction of the asset.
Records 2821 to 2835 of 3682
First | Previous | Next | Last
Featured Product
3D Vision: Ensenso B now also available as a mono version!
This compact 3D camera series combines a very short working distance, a large field of view and a high depth of field - perfect for bin picking applications. With its ability to capture multiple objects over a large area, it can help robots empty containers more efficiently. Now available from IDS Imaging Development Systems. In the color version of the Ensenso B, the stereo system is equipped with two RGB image sensors. This saves additional sensors and reduces installation space and hardware costs. Now, you can also choose your model to be equipped with two 5 MP mono sensors, achieving impressively high spatial precision. With enhanced sharpness and accuracy, you can tackle applications where absolute precision is essential. The great strength of the Ensenso B lies in the very precise detection of objects at close range. It offers a wide field of view and an impressively high depth of field. This means that the area in which an object is in focus is unusually large. At a distance of 30 centimetres between the camera and the object, the Z-accuracy is approx. 0.1 millimetres. The maximum working distance is 2 meters. This 3D camera series complies with protection class IP65/67 and is ideal for use in industrial environments.
Robotics and Automation - Featured Company
HONPINE
HONPINE is a leading supplier of reducers, RV reducers, robot joint motors, drive motors, and rotary actuators. Utilizing advanced manufacturing techniques, we have been providing precision transmission solutions since 2018. Our high-precision gearboxes have been exported to over 50 countries and have received excellent market feedback.
