Rex: A Single-board Computer With A Full OS That Is Designed For Robots
From the Rex Kickstarter :
Why do you want Rex?
There are two general classes of electronics used in robot hardware: microcontrollers (ex. Arduino) and single-board computers. Microcontrollers are great for projects that only require a single program to be run, quickly and without overhead, like controlling LEDs and motors. Single-board computers are great for anything you'd need a cheap, small computer for - like networking applications and image processing.
Advanced autonomous robots require the strengths of both. A system developed around Rex, being made specifically for robots, brings it all together in one nice little package in a way that has never been done before.
Hardware Specs:
Texas Instruments DM3730
1GHz 32-bit ARM Cortex-A8 Processor core
800MHz DSP core
512MB LPDDR RAM
USB Host port
MicroSD slot
Camera Module port
3.5mm Audio-in jack
3.5mm Audio-out jack
5V DC input for desktop development
Each Rex will come pre-installed with Alphalem OS, a FOSS custom linux distribution. It includes a core set of built-in device drivers - ones that we've hand-picked as being the most useful for robots (like USB WiFi adapters and cameras). We'll publish the list in a wiki on our website.
Here are the other main features:
An Arduino-style programming environment with support for multiple programming languages (C, C++, Python).
A special task manager called the Master Control Program (MCP).
An API for message passing in multi-process applications.
A standard Linux filesystem which will allow you to install just about any Linux software that can be cross-compiled for ARM.
Libraries for common processes such as I2C communication, face detection, and sensor reading.
Michael Toscano to Represent the UAS Industry at the AMA Expo
A leading voice in the industry of unmanned systems, Michael Toscano, president and CEO of the Association for Unmanned Vehicle Systems International (AUVSI), will be among the featured guest speakers at the Academy of Model Aeronautics EXPO, January 10-12, 2014, at the Ontario Convention Center in Ontario CA. Toscano will present "The State of the Industry" and will also participate in a panel discussion with James Williams, manager of the FAA's Unmanned Aircraft Systems Integration Office, and Rich Hanson, AMA government and regulatory affairs representative.
Climbing, Gecko-Like Robot by SFU Researchers Can be Useful in Space
The sticky feet of a climbing, gecko-like robot developed by SFU researchers could be useful in space, international tests show.
Opto Diode Introduces a 100 mm2 Photodiode- SXUV100
The highly sensitive device permits detection to 1 nm, and provides a remarkably stable response after exposure to EUV/UV conditions.
Harvest Automation and SBI Software Announce Partnership to Integrate Harvest Knowledge and SBI Grower
This collaboration will create a seamless connection between Harvest Knowledge and SBI Grower.
Festo Introduces the New CPX-FB36 Node for EtherNet/IP Communications
The CPX-FB36, which is the next generation replacement for the Festo CPX-FB32 communication node, is ideal for production and process automation environments requiring diagnostics from the operational and master controller level on down to the field level.
Five Elements Robotics Announces the Launching of Budgee
The Friendly Robot that Follows You Around and Carries Your Stuff!
Scientists Use Unique Robotic Vehicle to Study the Deep Sea
Scientists and engineers using advanced technology and a unique robotic vehicle to study the deep sea will also be using their computers to interact with students, teachers, and the public about the research they are conducting.
The Top 10 Most Popular DARPA Stories of 2013
Here is a look back at the most popular-based on webpage views.
techJOYnT Partners with RobotsLAB To Bring Award Winning Robots to Oklahoma Public Schools
techJOYnT partners with RobotsLAB to bring award winning robots to Oklahoma Public Schools. RobotsLAB BOX is a teaching aid designed to help educators demonstrate abstract concepts in math and science through the innovative use of robots.
Inertia Dynamics NEMA Brakes for Servo & Stepper Motors
The MPC is a power-off brake module with an output shaft.
Island University Designated by FAA as Unmanned Aircraft System Test Site
The test sites will facilitate testing and research of unmanned aerial systems (UAS) technologies to provide scientific data on the future integration of these aircraft safely with other air traffic.
Seegrid to Debut Automated GWS35 Walkie Stacker at MODEX 2014
Seegrid, the leading manufacturer of flexible AGVs, also known as robotic industrial trucks, will be officially launching its newest product at MODEX 2014 at booth #7317 in Atlanta, GA. The GWS35 is equipped with Seegrid's patented vision-guided autonomous navigation system and automatically transports palletized loads through manufacturing and distribution environments.
Google to Use Robots for Parcel Delivery
With Amazon announcing the launch of their Prime Air Project, Google too has decided to pitch itself as a worthy competitor in the parcel delivery race with the use of robots - a concept that Parcel2Go thinks will take the retail industry by storm.
Boots Industries Announces the Launch of The First-of-Its-Kind Self-replicating, High Precision 3D Printer, 'The BI V2.0'
The BI V2.0, a delta style 3D printer featuring widely available and self-replicating 3D printed components, has been launched by Boots Industries. The company has launched a Kickstarter campaign to roll out this new 3D printer with its sturdy self-replicating frame that offers one of the largest 3D build volumes and outstanding print quality to the public.
Records 4186 to 4200 of 7421
First | Previous | Next | Last
Industrial Robotics - Featured Product
Bimba Launches Plug-and-Play Vacuum End-Of-Arm Tooling for Collaborative Robots
The NEW Collaborative Robot Vacuum Tool (CRVT) from Bimba adds unparalleled flexibility to your collaborative robot. The standard CRVT is highly configurable to meet your application needs, but simple to install and operate. This fully integrated tool means all you need to supply is compressed air and a signal to control the valve. A variety of standard and custom options make the Bimba CRVT the perfect tool for your next collaborative robot project.
