Industrial Robotics Market is Expected to Reach $41.17 Billion, Globally, by 2020 - Allied Market Research
. The market was valued at $26.78 billion in 2012.
Axalta Coating Systems Sponsors First State Robotics and Awards Scholarship
Axalta awarded a scholarship to robotics team member, Noah Andrews. Noah recently graduated from high school and is looking forward to starting college in the fall as an information technology major, focusing on security.
Machine Vision Technology Ensures Product Quality and Traceability at Del Monte Foods
A comprehensive Del Monte quality initiative sought to ensure product code legibility, and improve labeling accuracy and overall traceability of its canned fruits and vegetables.
Raspberry Pi Model B+
From Eben Upton, Raspberry Pi Founder:
This isn’t a “Raspberry Pi 2″, but rather the final evolution of the original Raspberry Pi. Today, I’m very pleased to be able to announce the immediate availability, at $35 – it’s still the same price, of what we’re calling the Raspberry Pi Model B+.
The Model B+ uses the same BCM2835 application processor as the Model B. It runs the same software, and still has 512MB RAM; but James and the team have made the following key improvements:
More GPIO. The GPIO header has grown to 40 pins, while retaining the same pinout for the first 26 pins as the Model B.
More USB. We now have 4 USB 2.0 ports, compared to 2 on the Model B, and better hotplug and overcurrent behaviour.
Micro SD. The old friction-fit SD card socket has been replaced with a much nicer push-push micro SD version.
Lower power consumption. By replacing linear regulators with switching ones we’ve reduced power consumption by between 0.5W and 1W.
Better audio. The audio circuit incorporates a dedicated low-noise power supply.
Neater form factor. We’ve aligned the USB connectors with the board edge, moved composite video onto the 3.5mm jack, and added four squarely-placed mounting holes... ( cont'd )
Kickstarter - Autonomous Drone, HEXO+, Breaks $1 million in Kickstarter Funding, Promises User-Based Design Upgrade
The autonomous aerial camera had passed its original fundraising goal of $50,000 within 24 hours and eight days remain in the campaign
UAV Company Olaeris Guarantees to Reduce Crime
Money Back Offer Announced for Americas Top 100 Most Dangerous Cities
Aldebaran Opens Dedicated Space for Experiencing New Generation of Humanoid Robots
Aldebaran, the World leading humanoid robotics company, opened its first Atelier in Issy les Moulineaux a stone throw from Paris. As a space about discovery, interaction and learning. The Atelier is the very first facility of the brand open to the general public. It is fully dedicated to experimenting with our interactive, scalable and programmable humanoid robots: NAO and Pepper.
HHI Develops New Robotic Welding Process for Building Offshore Facilities
Hyundai Heavy Industries Co., Ltd. (HHI), the worlds biggest shipbuilder and a leading offshore facilities contractor, announced today that it developed a new automatic welding process for building offshore facilities.
Humanistic Robotics Mine and IED Roller Featured on Oshkosh's TerraMaxTM Unmanned Ground Vehicle (UGV) at Eurosatory 2014
HRI Enhances the Capability of Vehicles Used in Places Where Mines and IEDs are Prevalent
Introducing the 14th annual Unmanned Aerial Systems conference
The 14th annual Unmanned Aerial Systems conference takes place on the 17th - 18th December 2014, London, UK.
Applied manufacturing Technologies (AMT) Presents Technology Fair 2014 August 21, 2014. 25 Years of Automation Excellence
A combination of 30 speakers, vendor exhibits, technical breakout-training sessions, leading edge demonstrations and AMT engineers and specialists on-site, this is the must-attend automation event of the year.
Intro to Shape Memory Alloy Actuation Using Flexinol
From Jie Qi's projects page:
Shape memory alloys (SMAs) are metals that change shape when heated up. They are wonderful actuators in that they are light, silent and can be "turned on" by simply running current through. The shape that they change to can also be set, though this process is a bit more tricky. Flexinol is a particular brand of nitinol, which is an SMA made of nickel and titanium, and is pre-set to contract about 10% of its original length when heated.
In my projects, I generally used the 0.006" to 0.01" diameter, High-Temp wires.
Since Flexinol draws a lot of current (about 300mA for the diameters I used), you need a strong power supply like a wall supply or a good lithium-ion battery. I've used from 3.7V up to 6V (any more and my Flexinol wires would start overheating). To turn the Flexinol on, I would simply short the ends of the wire to the power. For digital control, I used a standard MOSFET circuit which is a digital switch that can be turned on and off using a microcontroller... ( cont'd )
RobLog Industrial Demonstrator Entrance for Robotic Logistics
The design and construction of the RobLog Industrial Demonstrator was made under the requirements for such a machine to be robust yet have a streamlined design, flexible enough to fit into different space confinements, such as loading docks or warehouses.
Photron Introduces Mini UX50 - High-Speed Imaging System
New, compact, rugged 1.3 MPixel high-speed camera for automotive safety testing
Velodyne LiDAR, Leader in Autonomous Vehicle Technology, To Be Featured in Back-to-Back Events in S.F. Bay Area
CEO David Hall Joins Panelists During Robotics Conference at UC Berkeley July 13; At AUVSI Symposium Near SFO, Velodyne Team to Demonstrate LiDAR Vehicle
Records 7441 to 7455 of 11370
First | Previous | Next | Last
Industrial Robotics - Featured Product
Destaco's PNEUMATIC PARALLEL GRIPPERS - RTH & RDH
Destaco's Robohand RDH/RTH Series 2 and 3 jaw parallel grippers have a shielded design that deflects chips and other particulate for a more reliable, repeatable operation in part gripping applications ranging from the small and lightweight, to the large and heavy. RDH Series of Rugged, Multi-Purpose Parallel Grippers for Heavy Parts - Designed for high particulate application environments, automotive engine block, gantry systems, and ideal for heavy part gripping The series includes eight sizes for small lightweight to large/heavy part gripping. RTH Series of Powerful, Multi-Purpose Parallel Grippers for Heavy Parts - Designed for large round shaped parts, automotive engine block and gantry systems, and heavy part gripping. They're available in eight sizes for small lightweight to large and heavy part gripping.
