Oriental Motor Announces Release of 120 W (1/6 HP) Brushless Motor & Driver with Optional Hypoid Right Angle JH Gear
Hypoid Right Angle JH Gear with Stainless Steel Shaft and IP66 rated
Novotechnik - New Touchless Angle Sensors With IO-Link
IO-Link is a standard intelligent digital interface. Its serial communication protocol makes wiring easier, needing only three wires to simultaneously transmit measured values and status information. The status bit can signal a controller if a sensor needs replacement and the controller can detect the new device and automatically configure it based on stored values minimizing down time. Parameters such as zero point can be sent and programmed into the sensor over this bus.
Robotics startup Exotec raises $3.5 million to help warehouses pack and dispatch goods using mini robots
Paul Sawers for Venture Beat: A French robotics startup has raised €3.3 million ($3.5 million) to build and grow a fleet of mobile robots that help warehouses prepare orders for delivery.
The company was founded in 2015 by former GE Healthcare software architect Renaud Heitz and BA Systèmes technical director Romain Moulin, and Exotec Solutions (“Exotec”) robots have already been tested across a number of industries. With $3.5 million more in its coffers, the company expects to launch its first robot — called Exo — into the wild in early 2017. The most recent round was raised from 360 Capital Partners, Breega Capital, and a handful of its existing investors.
The miniature robots are being targeted at any logistics operator that relies on humans to traverse large warehouses picking items off shelves, and it promises to cut employees’ average daily distance covered from 15km to 4km per day and to “[double] the productivity” of each worker. The robots are controlled by what the company calls a “centralized intelligence system,” which liaises between the humans and the robots on the ground. Cont'd...
Microscan Hosts 3-Day Advanced Machine Vision Training Course
Microscan, a global technology leader in barcode, machine vision, and lighting solutions, announces a three-day training course on advanced machine vision tools taught through hands-on exercises using Microscans advanced Visionscape® Machine Vision Software platform.
Global Motion Control Shipments Increase Five Percent in the First Nine Months of 2016
Global shipments for motion control products increased by five percent to $2.4 billion in the first nine months of 2016, according to new statistics released by the Motion Control & Motor Association (MCMA), the industrys trade group.
Desktop Robotic Arm Manufacturer Dobot Launches Kickstarter Campaign for Dobot M1
The China-based robotic startup is raising funds for the Dobot M1 arm -- which is targeted at small businesses, desktop developers, educators and makers -- following last year's successful Kickstarter campaign for the original Dobot. The M1 prototype has since been tested by leading manufacturers such as Apple, Bose and Chow Tai Fook.
TM Robotics Partners with A-Tech to Sell Toshiba Machine Industrial Robots Coast to Coast in Canada
A-Tech will offer full line of Cartesian, 6-Axis and SCARA robot systems for automation and materials handling needs in a variety of industries
FANUC Robotics Integrator Remtec Automation Announces Growth in Automated Robotic Material Handling Projects
Remtec Automation sees uptick in automated robotic pick-and-place, palletizing and case-packing conveyor projects due to tight labor market in manufacturing.
Tolomatic adds extreme-force capability to electric linear rod actuator offering
Tolomatic's new electric linear rod actuator is more efficient, accurate and flexible compared to hydraulic cylinders--and without the messy leaks or noisy operation of hydraulics.
Lenze Enables Fast Machine Commissioning
3, 5 and 7 minute demonstrations featured at PACK EXPO
New Compact Right-Angle, Flange-Mounted Planetary Gearbox
Neugart USA introduces its new compact right-angle, flange-mounted WPLFE gearbox for applications with tight space constraints and powerful torque requirements.
The University of Manchester Uses MapleSim in Robotics and Control Systems Courses
The University of Manchester, the largest single-site university in the UK, has a reputation for producing some of the worlds greatest engineering and mathematical minds. Twenty-five Nobel Prize winners have either worked or studied at the University.
Tibbo Technology Inc. Announces the OPC Server Release
The main point of OPC protocol is simple - it is a cross-functional fixed interface to communicate between data sources in the manufacturing industry.
FABTECH 2016 Las Vegas is a Knockout
Cutting-edge technologies, expert perspectives and large industry attendance define North Americas premier manufacturing tradeshow and conference
US Digital Introduces New High Resolution E4T Optical Encoder Now with 400 and 500 CPR
Vancouver, Washington - November 22, 2016 - US Digital, a US manufacturer of quality motion control since 1980, today announced the addition of 400 and 500 cycles per revolution (CPR) resolutions to its existing E4T line of miniature optical encoders. Specifically designed for robotics, medical and other industrial automation applications, the new E4Ts deliver position and velocity feedback, while fitting National Electrical Manufacturers Association (NEMA) motors as small as size eight.
Records 5806 to 5820 of 7690
First | Previous | Next | Last
Factory Automation - Featured Product
New incremental encoder IERF3 L from FAULHABER
FAULHABER is expanding its product range with the ultra-precise incremental encoder IERF3 L. Thanks to the optical measuring principle and state-of-the-art chip technology, the device offers the highest resolution, excellent repeatability, and outstanding signal quality. In typical applications, the positioning accuracy is 0.1° and the repeatability 0.007°. This makes the encoder the perfect solution for high-precision positioning applications in confined spaces.
Robotics and Automation - Featured Company
MVTec LLC
MVTec is a leading international manufacturer of software for machine vision used in all demanding areas of imaging like the semi-conductor industry, inspection, optical quality control, metrology, medicine or surveillance. In particular, software by MVTec enables new automation solutions in settings of the Industrial Internet of Things. MVTec is the developer and vendor of the general purpose machine vision software products HALCON and MERLIC.
