What IS an Encoder?

Encoders use different types of technologies to create a signal, including: mechanical, magnetic, resistive and optical - optical being the most common.

The ABC of RPA, Part 6: Are robotics and automation in conflict with my IT Department?

Its important that your IT staff understand the impact of automation - more importantly, that it is not a replacement for your IT team.

Solving the Custom Robot Parts Challenge: The Deshazo-MFG.com Story

The number of unique parts required is high - some 200 parts in the past year or so - but the volume in which each part is needed is low, often only one or two.

Raspberry Pi And MATLAB based 3D Scanner

Raspberry Pi serves as the main controller board for the setup, capturing the images using the Pi Camera, controlling the Line LASER diode and providing control signals to the EasyDriver (Stepper Motor Driver).

Everything You Need to Know About Stepper Motors

Recent servo motors are equipped with the encoder of 20 bits (1,048,576 steps) which has a very fine resolution. Because of this, errors due to the encoder installation accuracy have a huge effect on stopping accuracy.

What's Happening in Robotics? Five Trends to Watch

2016, through mid-June, shows 56 startups received $427.5 million; and that 20 acquisitions have happened thus far totaling $4.53 bn (from the 11 reporting amounts involved).

Robot Vision vs Computer Vision: What's the Difference?

Unlike pure Computer Vision research, Robot Vision must incorporate aspects of robotics into its techniques and algorithms, such as kinematics, reference frame calibration and the robot's ability to physically affect the environment.

The ABC of RPA, Part 5: What Is the Cost of Automation and How Do I Justify It to the Leadership Team?

Weve put together a breakdown of the cost of automation, and how to justify it to the leadership team.

How Using the Latest 3D Simulation Software for Vision Guided Robotic Applications Will Save You Time and Money

It is easy to imagine the time saved by using the latest simulation tools to develop vision guided robotic applications.

Anki To Release Game-changing Cozmo SDK

For developers interested in lower-level control of Cozmo, the SDK provides direct access to low-level controls such as driving the robots treads, moving the head and lift, displaying bitmaps on his screen, reading accelerometer and gyroscope data, processing images from his camera, and communicating with the power cubes (lights, accelerometer, tap detection).

The New Police Arsenal - Robots

Bomb robots were designed to help detonate and remove Improvised Explosive Devices (IEDs), not to deliver payloads. But the Dallas police improvised and attached a bomb delivery system to the robot.

Intuitive Machines Used 3w-powered Unmanned Aerial Vehicle Platform for Flights in Antarctica

The flight of Intuitive Machines illustrated and proved that an excellent developed UAV like the Tiburon Jr, equipped with a powerful and reliable engine can be an efficient alternative to manned airplanes and helicopters, even in hazardous environments.

Logistic companies Swisslog, Dematic, Egemin and Intelligrated have all been Acquired

All these companies are logistics and material handling vendors and times are changing in logistics and fulfillment

The ABC of RPA, Part 4: Choosing the right robotics and automation software to get the job done

In part four of the ABC of RPA series, we discuss how to choose the right software to suit your automation requirements.

Development of Battery-Free Multi-Rotation Absolute Encoder

In recent years, there have been many demands for equipment with high productivity to have a system that retains positioning information, even after the main power supply is turned off.

Records 526 to 540 of 1093

First | Previous | Next | Last

Featured Product

ST Robotics Develops the Workspace Sentry for Collaborative Robotics

ST Robotics Develops the Workspace Sentry for Collaborative Robotics

The ST Robotics Workspace Sentry robot and area safety system are based on a small module that sends an infrared beam across the workspace. If the user puts his hand (or any other object) in the workspace, the robot stops using programmable emergency deceleration. Each module has three beams at different angles and the distance a beam reaches is adjustable. Two or more modules can be daisy chained to watch a wider area. "A robot that is tuned to stop on impact may not be safe. Robots where the trip torque can be set at low thresholds are too slow for any practical industrial application. The best system is where the work area has proximity detectors so the robot stops before impact and that is the approach ST Robotics has taken," states President and CEO of ST Robotics David Sands.